What other options have we got if we want to receive multistream.
TBS 5925
Re: TBS 5925 #321
Re: TBS 5925 #322
Posted 21 December 2016 - 05:21
Look at what I said:
Yesterday night I turned into standby my ET10000 , last channel was CNN HD (28 east).
Today I turn it on, and ..... tbs5925_fail.jpg
I look at the config, tbs5925_fail2.jpg and it's there.
I restart enigma, and everything is ok. tbs5925_fail_ok.jpg
Is normal this behaviour ?
Yes. Normal behavior for this device using enigma2. My work around solution to fix this issue is to set the start-up to a different channel that Is Not TBS5925.
Re: TBS 5925 #323
Posted 21 December 2016 - 06:56
What other options have we got if we want to receive multistream.
You can use Technisat Skystar USB HD (not the one with the CI). It has drivers in Linux since 2.6.39!
Another option is Gigablue with their pluggable tuner, drivers with MIS/PLS not public yet (available only for testers).
In 2017 more will come... (eg with s2x tuner you get bonus apsk + mis/pls)
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: TBS 5925 #324
Re: TBS 5925 #325
Re: TBS 5925 #326
Re: TBS 5925 #327
Posted 7 February 2017 - 21:38
PS. You do not need special tuner from TBS to lock on those frequencies, any S2 tuner will do.
Edited by athoik, 7 February 2017 - 21:39.
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: TBS 5925 #328
Re: TBS 5925 #329
Posted 22 February 2017 - 12:54
There is no OpenPLi for a DM7080.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: TBS 5925 #330
Posted 31 March 2017 - 15:35
Hello,
I'm trying to lock on the two PLS COMBO transponders in Hispasat. I'm using the TBS5925 and SDG experimental image but no luck so far. I could swear I already locked 11491 V with PLS code 2388 COMBO in the past, but I can't figure out what I'm doing different this time.
Has anyone had any success with PLS Combo?
Re: TBS 5925 #331
Re: TBS 5925 #332
Posted 23 April 2018 - 13:23
Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter, PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)
Re: TBS 5925 #333
Re: TBS 5925 #334
Re: TBS 5925 #335
Re: TBS 5925 #336
Posted 28 February 2019 - 20:07
Then you need to create a PR on Vu plus GitHub.
Otherwise, learn git and how to build kernel using OE.
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: TBS 5925 #337
Posted 28 February 2019 - 21:29
I need this support too.. but no solution until today...
Vu zero (mips) working fine, but Zero 4k (arm), don't appear tuner after install all available drivers...
https://github.com/v...uplus/issues/61
Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter, PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)
Re: TBS 5925 #338
Posted 28 February 2019 - 21:31
Check OE-A it might have patches ready.
Then you need to create a PR on Vu plus GitHub.
Otherwise, learn git and how to build kernel using OE.
Easy for enthusiasts like me...
Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter, PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)
Re: TBS 5925 #339
Posted 1 March 2019 - 15:15
I am not sure if I can get this to work on OpenPLI.... the funny part is that it works on OpenATV...
You would think that if it is in one image it can easily applied to OpenPLI... maybe not ..
Please someone help us to get the TBS-5925 working on OpenPLI .... the vu receiver lacks the ability to decode ACM and 16APSK channels ... TBS 5925 makes this receiver very powerful ...
Re: TBS 5925 #340
2 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
-
Google (1)