I have no solution but 14.2dB=70% and a BER of 832 seams very strange values
Now, signalfinder BER = 0
same result, no T2-MI channels yet.
Edited by El Sato, 24 October 2016 - 16:42.
TBS 5925
Started by jpuigs, 25 Aug 2013 18:48
340 replies to this topic
Re: TBS 5925 #301
-
- Senior Member
- 627 posts
+26
Good
Posted 24 October 2016 - 16:40
Re: TBS 5925 #302
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 24 October 2016 - 17:12
Hi,
I followed exactly step by step athoik's guide: How to use T2-MI
http://www.satdreamg...ow-to-use-T2-MI
But no success, I can't receive those (4.8°E) T2-MI channels.
I have a lock on all three frequencies.
Any idea?
Tested with latest experimental SatDreamGr Image
Hi,
What the following commands return?
astra --analyze http://127.0.0.1:8001/1:0:1:1:48:10:30B022:0:0:0: astra --analyze "t2mi://#t2mi_pid=4096&t2mi_input=http://127.0.0.1:8001/1:0:1:1:48:10:30B022:0:0:0:"
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: TBS 5925 #303
-
- Senior Member
- 627 posts
+26
Good
Posted 24 October 2016 - 17:27
Hi, and thanks
I have placed astra.conf in /etc/astra/
/etc/astra/astra.conf
I get this message for both commands
-sh: astra: not found
Edited by El Sato, 24 October 2016 - 17:31.
Re: TBS 5925 #304
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 24 October 2016 - 17:55
Did you forgot to install astra-sm? 
opkg install astra-sm
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: TBS 5925 #305
-
- Senior Member
- 627 posts
+26
Good
Posted 24 October 2016 - 18:05
No, I didn't install it, because it was not mentioned in howto tutorial.
Did it now.
Thanks
Re: TBS 5925 #306
-
- Senior Member
- 627 posts
+26
Good
Posted 24 October 2016 - 18:36
Didn't succeed yet with T2-MI
I've got PID errors
logfile 1:
Spoiler
logfile 2:
Spoiler
Edited by El Sato, 24 October 2016 - 18:39.
Re: TBS 5925 #307
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 24 October 2016 - 18:42
Seems fine to me.
Above shows that you can stream the PID containing T2-MI and you can de-encapsulate T2-MI.
So the channels in bouquet should work as well
Above shows that you can stream the PID containing T2-MI and you can de-encapsulate T2-MI.
So the channels in bouquet should work as well
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: TBS 5925 #308
-
- Member
- 19 posts
+2
Neutral
Posted 10 November 2016 - 15:24
Hi,
Here is a satellite.xml to scan automatically transponders in M.I.S with PLS for Eutelsat 5 West. Many Channels from France an Italy, is' time to scan "MIS" France and "MIS" Italy...
There is only a problem with the 11509 H, this one don't work in automatic scan.
I think that the 3 lines for this one are good, the same parameters work in manual scan!
Have tried with PLS value 050416 and 50416 but no succes!
Attached Files
-
satellites.xml 7.58KB
9 downloads
TV = Solo4K 2xDVB-S2 (FBC) + 2xDVB-T2 + TBS5925
Tuner A = Multisat Indoor Home Made 10 LNB 52°e > 5°w-Tuner B = Fibo 90cm USALS = 68°e > 45°w
Re: TBS 5925 #309
-
- PLi® Contributor
- 4,654 posts
+162
Excellent
Posted 10 November 2016 - 16:18
Hi, [...] There is only a problem with the 11509 H, this one don't work in automatic scan.
The problem is the scan from that transponder is being overwritten by another transponder that has identical NID and TSID. Delete 11480H from your satellites.xml, reboot, and scan again.
Re: TBS 5925 #310
-
- Senior Member
- 627 posts
+26
Good
Posted 10 November 2016 - 17:30
Or give multistream frequencies a different satellite positions in satellites.xml like I did.
original sat position:
<sat name="5.0W Eutelsat 5 West A Ku Band" flags="1" position="-50">
...ku band frequencies
</sat>
added sat position:
<sat name="5.0W Multistream" flags="1" position="-49">
...multistream frequencies
</sat>
Edited by El Sato, 10 November 2016 - 17:32.
Re: TBS 5925 #311
-
- Senior Member
- 627 posts
+26
Good
Posted 10 November 2016 - 18:18
For those who want to try with separate multistream satellite positions, this is pli satellites.xml from 05-11-2016
with added separate multistream satellite positions for 12.5°W - 5.0°W - 4.8°E - 10.0°E - 45.0°E
Re: TBS 5925 #312
-
- Member
- 19 posts
+2
Neutral
Posted 10 November 2016 - 18:37
Hi, [...] There is only a problem with the 11509 H, this one don't work in automatic scan.
The problem is the scan from that transponder is being overwritten by another transponder that has identical NID and TSID. Delete 11480H from your satellites.xml, reboot, and scan again.
Hi Huevos,
Thanks but there is no 11480H in my satellite.xml.!
Thanks El Sato for this file!
Edited by stpierre, 10 November 2016 - 18:40.
TV = Solo4K 2xDVB-S2 (FBC) + 2xDVB-T2 + TBS5925
Tuner A = Multisat Indoor Home Made 10 LNB 52°e > 5°w-Tuner B = Fibo 90cm USALS = 68°e > 45°w
Re: TBS 5925 #313
-
- Senior Member
- 627 posts
+26
Good
Posted 10 November 2016 - 18:55
If you don't have motorised satellite dish, you can use both seperated positions (5.0°W KU band + 4.9°W multistream) on one LNB.
You just need to setup advanced configuration.
Edited by El Sato, 10 November 2016 - 18:58.
Re: TBS 5925 #314
-
- Senior Member
- 1,143 posts
+32
Good
Posted 18 December 2016 - 00:57
Is work for this tuner finished ? Or will change on Openpli 5 ?
I'm currently using my TBS 5925 for adding another (normal) tuner to my ET10000 box, tuner E, and I have to restart enigma sometimes to get tuner working again.
It happens usually when I turn off box (in normal standby mode) for several hours and last channel was one from that tuner (E).
Then when turning it on, it appears a window which says tuner unavailable.
I restart GUI and it's working again.
Are there more TBS tuners, (apart from these ones 5980/5928/5925/5921/5920/5910), supported ?
Enigma is getting old....
Spoiler
Re: TBS 5925 #315
-
- Senior Member
- 1,143 posts
+32
Good
Posted 20 December 2016 - 14:37
Look at what I said:
Yesterday night I turned into standby my ET10000 , last channel was CNN HD (28 east).
Today I turn it on, and ..... 
tbs5925_fail.jpg 19.67KB
33 downloads
I look at the config,
tbs5925_fail2.jpg 60.09KB
23 downloads and it's there.
I restart enigma, and everything is ok.
tbs5925_fail_ok.jpg 116.72KB
25 downloads
Is normal this behaviour ?
Enigma is getting old....
Spoiler
Re: TBS 5925 #316
-
- PLi® Core member
- 70,485 posts
+1,810
Excellent
Posted 20 December 2016 - 14:43
USB tuner are never that reliable.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: TBS 5925 #317
-
- Senior Member
- 1,143 posts
+32
Good
Posted 20 December 2016 - 20:14
Yes, I know.
But this behaviour only happens if last channel before powering off is a TBS one, and it's off for several hours.
If I turn it off using other 4 internal tuners, then when poerwing on, I can tune to a TBS channel perrfectly,
Edited by jpuigs, 20 December 2016 - 20:14.
Enigma is getting old....
Spoiler
Re: TBS 5925 #318
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 20 December 2016 - 20:23
Please contact TBS support, or use TBS community to get support...
I tried several times to get support for several issues (usb errors etc) and nobody from TBS spend time.
So use it or throw it away but do not compain for crappy TBS products.
I tried several times to get support for several issues (usb errors etc) and nobody from TBS spend time.
So use it or throw it away but do not compain for crappy TBS products.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: TBS 5925 #319
-
- Senior Member
- 1,143 posts
+32
Good
Posted 20 December 2016 - 20:45
OK.
I do not complain to you. Your work is great.
I opened this topic 3 years ago, asking if it were possible to use a TBS on our boxes, and you've already got it. I'm really gratefull to you.
I just asked if developement was finished, because it seems a very small bug, and maybe nobody had noticed it.
I won't talk about it anymore.
Enigma is getting old....
Spoiler
Re: TBS 5925 #320
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 20 December 2016 - 20:50
There are several issues, the experience is not like "windows" boxes with TBS cards.
Soon or late you get issues with TBS cards (overheat), they mention nothing, but they make new product (5927) with fan!!
There are several issues with usb-errors, reported, no answers...
Spending several hours to make them selling their really expensive product... no more... With the price of their product, you get a full receiver, with more that one tuner, with support, with updates, with.....
I am disappoint from them.
Soon or late you get issues with TBS cards (overheat), they mention nothing, but they make new product (5927) with fan!!
There are several issues with usb-errors, reported, no answers...
Spending several hours to make them selling their really expensive product... no more... With the price of their product, you get a full receiver, with more that one tuner, with support, with updates, with.....
I am disappoint from them.
Edited by athoik, 20 December 2016 - 20:51.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
6 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users
