Jump to content


Photo

TBS 5925


  • Please log in to reply
340 replies to this topic

Re: TBS 5925 #241 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 17 August 2016 - 15:09

Thanks a lot!

I'm testing right now Satdreamgr-4.0-gst1-et9x00-20160816.zip on my ET9200.

 

The image does not recognise TBS5925 by default, I had to install USB and TBS packets. After a reboot I had a crash while configuring the newly found tuner, but on 2nd reboot all seemed set up to continue. Now I am testing on 5ºW. Normal transponders are OK (11591 V) but I can't get any signal on MIS transponders (12627 H, 12648 V). Is this a symptom that I need custom satellites XML file or another problem? 



Re: TBS 5925 #242 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 17 August 2016 - 15:17

Correct, the image will recognize TBS after you install the driver from menu. If the crash continues please upload the crashlog to have a look.

Also you need custom satellites.xml with MIS/PLS codes (eg from here http://www.satdreamg...OR-MULTISTREAM)

Edited by athoik, 17 August 2016 - 15:17.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #243 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 17 August 2016 - 17:20

Correct, the image will recognize TBS after you install the driver from menu. If the crash continues please upload the crashlog to have a look.

Also you need custom satellites.xml with MIS/PLS codes (eg from here http://www.satdreamg...OR-MULTISTREAM)

 

 

Thanks a lot Athoik.

I replaced the satellites.xml file with that one, in etc/tuxbox/  but I didn't see any effect...

 

the tuner does not find any signal, satfinder does not "see" anything either to lock. Only thing that I notice is the box becoming very slow, almost freezing while I'm trying to lock MIS transponders...

 

Any clue?


Edited by sector_d, 17 August 2016 - 17:20.


Re: TBS 5925 #244 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 17 August 2016 - 17:34

 

Correct, the image will recognize TBS after you install the driver from menu. If the crash continues please upload the crashlog to have a look.

Also you need custom satellites.xml with MIS/PLS codes (eg from here http://www.satdreamg...OR-MULTISTREAM)

 

 

Thanks a lot Athoik.

I replaced the satellites.xml file with that one, in etc/tuxbox/  but I didn't see any effect...

 

the tuner does not find any signal, satfinder does not "see" anything either to lock. Only thing that I notice is the box becoming very slow, almost freezing while I'm trying to lock MIS transponders...

 

Any clue?

 

 

Well, I have some news.

The box gets very easily in a irresponsive state, but I managed to tune a MIS transponder: 11637 (RAI)

So, the concept seems to be proven that can work!!

 

I will continue to try other transponders and evaluate the stability.



Re: TBS 5925 #245 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 17 August 2016 - 18:38

More good news!

The situation has improved very much.

 

First, I copied the satellites.xml not only to etc/tubxbox  but also to etc/enigma2/ and rebooted.

Then, I used a shorter USB cable to connect to ET9200 and used the back USB port rather than the front one.

Finannaly, switched to a bigger dish to eliminate satellite signal issues.

 

I can now tune to pretty much all MIS transponders on 5ºW.

I tested LA Mancha TP on Hispasat, with a small dish and no signal. Will try now with the big one.

 

BTW, this image seems to manage to control my 1.2 diseqc VBOX...

 

So far so good!

Congratulations to all!

 

 



Re: TBS 5925 #246 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 17 August 2016 - 19:25

Good, I will push changes soon.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #247 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 17 August 2016 - 19:33

Good, I will push changes soon.

 

You mean, on the normal OpenPli builds? That would be nice, although I'm actually also liking this image :)

 

Tested just now on Hispasat the "La Mancha" TP with my Famaval 240cm, and also works. As expected, DVB-S2 modulations are more sensitive to lack of signal and LNB quality issues. MIS transponders seem (apparently to me) even a little more sensitive.



Re: TBS 5925 #248 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 17 August 2016 - 21:09

As promised, here are the changes for kernel 3.8.7

https://github.com/X...-xtrend/pull/11

With above changes TBS drivers will be available for 1st generation boxes.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #249 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 22 August 2016 - 15:39

I'm currently testing on my ET9200 with Openpli updated as of yesterday.

I don't seem to get the TBS 6925 locking MIS transponders as I did on the test image. The card Is working on normal ones.

 

I did replace the satellites.xml on /etc/tuxbox...

 

What else could be the problem? I suspect wrong driver or packet management/ installation... how can I be sure of this?


Edited by sector_d, 22 August 2016 - 15:39.


Re: TBS 5925 #250 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 22 August 2016 - 15:48

The patches for MIS/PLS are not included in OpenPLi 4. They will merged in OpenPLi 5.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #251 antonio215

  • Senior Member
  • 41 posts

0
Neutral

Posted 22 August 2016 - 16:34

The patches for MIS/PLS are not included in OpenPLi 4. They will merged in OpenPLi 5.



When it will be ready openpli 5???

Tanks

Re: TBS 5925 #252 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 22 August 2016 - 20:44

The patches for MIS/PLS are not included in OpenPLi 4. They will merged in OpenPLi 5.

Ok!

Thanks for clearing that out!

 

Is there an estimate for a first release date of OpenPli 5? What's the best thread to follow that development?



Re: TBS 5925 #253 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 22 August 2016 - 21:14

I guess when OpenPLi 5 is out there will be an announcement, and OpenPLi images will become available in frontpage.

At some point when OpenPLi 5 is out MIS/PLS patch will find the way to Enigma2, but not most probably day 0.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #254 nutkao

  • Member
  • 1 posts

0
Neutral

Posted 26 August 2016 - 11:02

Hi, i want to know if by tbs 5925 and vu +  you can see the feed in 4: 2: 2 thanks



Re: TBS 5925 #255 dhwz

  • Senior Member
  • 227 posts

+20
Neutral

Posted 26 August 2016 - 11:11

4:2:2 has nothing to do with the tuner, so no it won't. Only HW which is capable to decode 4:2:2 will work.



Re: TBS 5925 #256 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 26 August 2016 - 11:18

BTW, did anyone tried 4:2:2 with hevc on solo4k?

 

Edit1: Samples here: https://www.dropbox....sQng7T6LSqHhGHa


Edited by athoik, 26 August 2016 - 11:20.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #257 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 26 August 2016 - 16:43

BTW, did anyone tried 4:2:2 with hevc on solo4k?
 
Edit1: Samples here: https://www.dropbox....sQng7T6LSqHhGHa


Just tried, only 8bit and 10bit 4:2:0 play ;)

So no 12bit. No 4:2:2. No 4:4:4.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #258 berndel

  • Senior Member
  • 104 posts

0
Neutral

Posted 28 August 2016 - 21:22

 

very good. but, which receiver is it??


It's the Edision osmini.

 

 

thx. is it this one? http://www.ebay.de/i...2xUSB-Netzwerk/


Edited by WanWizard, 29 August 2016 - 10:44.
corrected link


Re: TBS 5925 #259 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 28 August 2016 - 21:40

The link seems broken.

There are four versions of OS mini.

S2 or S2 + S2 or S2 + T2/C or T2/C.

All versions using same image and drivers.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #260 berndel

  • Senior Member
  • 104 posts

0
Neutral

Posted 29 August 2016 - 18:38

ok. thx.




11 user(s) are reading this topic

0 members, 11 guests, 0 anonymous users