Jump to content


Photo

Installation of two usb tuner to Vu Duo


  • Please log in to reply
35 replies to this topic

#1 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 24 September 2013 - 20:19

So ...

I have Sundteck Media TV and Digital Home MSI DigiVox mini II v3.0.

Both work perfectly apart, but not at all together.
For Sundtek SundtekControlCenter plugin and use MSI drivers, firmware have just installed everything from the food.
Where the dongle detected as dvb-t is, ie MSI, though work Sundtek and MSI inactive is.

What should I do the alee both to run to make...

 

lsusb:

 

Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 1a40:0101
Bus 001 Device 003: ID 8564:1000
Bus 001 Device 004: ID 15a4:9016 <<< MSI Digivox
Bus 001 Device 005: ID eb1a:51b2 <<< Sundteck
 

dmesg and lsmod in attach

Attached Files

  • Attached File  dvb.log   15.23KB   2 downloads


Re: Installation of two usb tuner to Vu Duo #2 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 15:40

Hello guys!

 

Really nobody knows answer to my question???

Or it is not possible with PLi?



Re: Installation of two usb tuner to Vu Duo #3 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 26 September 2013 - 16:21

It is certainly possible with PLi, but perhaps not with the vuduo.

Re: Installation of two usb tuner to Vu Duo #4 pop_eye

  • Senior Member
  • 240 posts

+9
Neutral

Posted 26 September 2013 - 16:31

It is also possible with vu-duo to have two usb dvb tuners as it currently supporting two vtuner interfaces.

 

I would rather choose standard usb dvb tuners supported by linuxtv then anything else.


Edited by pop_eye, 26 September 2013 - 16:33.


Re: Installation of two usb tuner to Vu Duo #5 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 16:44

I have two USB tuners that working apart easily.
But not combined.
What more should I adjust



Re: Installation of two usb tuner to Vu Duo #6 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 16:58

586c57d65520.png

 

How to adjust another nim_socket?


Edited by westsib, 26 September 2013 - 16:59.


Re: Installation of two usb tuner to Vu Duo #7 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 17:02

It is certainly possible with PLi, but perhaps not with the vuduo.

which that possible?

Duo2 or Ultimo )))



Re: Installation of two usb tuner to Vu Duo #8 pop_eye

  • Senior Member
  • 240 posts

+9
Neutral

Posted 26 September 2013 - 18:34

Are you using powered USB hub for the tuners before connected to vu-duo ?

It seems to me you are straining the power resources.

 

You can hardly get one usb tuner working when connected to the bcm hub port - just imagine how two will work in same time.

 

Also , try changing the sundtek with something else and see how its working.


Edited by pop_eye, 26 September 2013 - 18:35.


Re: Installation of two usb tuner to Vu Duo #9 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 19:04

I have tried with USB Hub and without...
No success.
What do you mean " changing the sundtek with something else"
Not understood



Re: Installation of two usb tuner to Vu Duo #10 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 26 September 2013 - 19:10

Doesn't sundtek have some config option telling it to reserve the second dvb adapter for the dvb-usb device?

Re: Installation of two usb tuner to Vu Duo #11 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 19:48

Now without hub:

login as: root
root@192.168.0.3's password:
root@vuduo:~# ls /dev/dvb/
adapter0  adapter1
root@vuduo:~# ls /dev/misc/
pvr      vtuner0  vtuner1
root@vuduo:~#  cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2
Name: BCM7335 DVB-S2 NIM (internal)
Frontend_Device: 0
NIM Socket 1:
Type: DVB-S2
Name: BCM7335 DVB-S2 NIM (internal)
Frontend_Device: 1

NIM Socket 2:
Type: DVB-T
Name: DVB-T 2
Frontend_Device: 2root@vuduo:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek MediaTV Digital Home (USB 2.0)]  DVB-C, DVB-T, REMOTE-CONTROL
  [BUS]:
     ID: 2-1
  [SERIAL]:
     ID: U121211082442
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

root@vuduo:~#



this is weird, but it works only Sundtek, although Nim Socket 2 DVB-T is

 

 

Doesn't sundtek have some config option telling it to reserve the second dvb adapter for the dvb-usb device?

 

Yes, Sundtekplugin has this function, but it is off.
Or should I change what?



Re: Installation of two usb tuner to Vu Duo #12 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 26 September 2013 - 20:01


Doesn't sundtek have some config option telling it to reserve the second dvb adapter for the dvb-usb device?

 
Yes, Sundtekplugin has this function, but it is off.
Or should I change what?


Yes, I think you should try to use that function.
The 'real' dvb-usb device should be adapter1, so sundtek should skip that, and use adapter2 instead.
That might very well solve your problem.

Re: Installation of two usb tuner to Vu Duo #13 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 20:56

I just tried. Works not again :huh:

8d405d5e9f2a.png

 

I think...this function probably second Sundtek USB tuner
 


Edited by westsib, 26 September 2013 - 21:00.


Re: Installation of two usb tuner to Vu Duo #14 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 21:05

There is Sundtek log

1970-01-01 01:00:19 [465] Starting up Multimedia Framework (Sep 26 2013 14:25:25)
1970-01-01 01:00:19 [466] Starting service processor (PID 466)
1970-01-01 01:00:19 [465] API Version: 5.10
1970-01-01 01:00:19 [465] Running on Linux (3.1.1)
1970-01-01 01:00:19 [465] unable to load acceleration module
1970-01-01 01:00:19 [465] scanning devices
1970-01-01 01:00:19 [465] scanning for drivers
1970-01-01 01:00:19 [465] scanning for plugins
1970-01-01 01:00:19 [465] Starting up device manager
1970-01-01 01:00:19 [465] scanning devices done
1970-01-01 01:00:19 [465] attached devices:
1970-01-01 01:00:19 [466] Autostarting scripts in /etc/sundtek/
1970-01-01 01:00:19 [466] executed all available items
1970-01-01 01:00:19 [465] registering ID: 0
1970-01-01 01:00:19 [465] disconnecting kernel driver
1970-01-01 01:00:20 [465] Initial mode requested: DVBC
1970-01-01 01:00:20 [465] attaching DVB-T, DVB-C
1970-01-01 01:00:20 [465] Using second generation demodulator
1970-01-01 01:00:22 [465] SETTING DVB-C
1970-01-01 01:00:22 [465] demodulator successfully attached (DVBC)!
1970-01-01 01:00:22 [465] Allocation using pg for type 65678
1970-01-01 01:00:22 [465] requesting to attach tuner(s) now
1970-01-01 01:00:24 [465] registering: adapter2/0
1970-01-01 01:00:24 [465] registered virtual: /dev/dvb/adapter2/frontend0
1970-01-01 01:00:24 [465] registered virtual: /dev/dvb/adapter2/demux0
1970-01-01 01:00:24 [465] registered virtual: /dev/dvb/adapter2/dvr0
1970-01-01 01:00:24 [465] Setting RC Protocol to NEC
1970-01-01 01:00:24 [465] registered virtual: /dev/mediainput0
1970-01-01 01:00:24 [465] Remote Control Layout: 0
1970-01-01 01:00:24 [466] trying to load uinput module
1970-01-01 01:00:24 [466] loading uinput kernel extention failed, remote control will not work with lirc
1970-01-01 01:00:24 [465] No remote control support available
1970-01-01 01:00:24 [465]
1970-01-01 01:00:24 [465] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
1970-01-01 01:00:24 [465] with Sundtek MediaTV only
1970-01-01 01:00:24 [465] Driver loaded within 4568 milliseconds
1970-01-01 01:00:24 [465] Serial(0): U121211082442
1970-01-01 01:00:24 [465] Enabling Dreambox Support for first Adapter (/dev/dvb/adapter2/frontend0)
1970-01-01 01:00:24 [465] Supporting DVB-S/S2 API for Dreambox
1970-01-01 01:00:24 [465] starting up dreambox /dev/dvb/adapter2/frontend0
1970-01-01 01:00:24 [465] Using local device
1970-01-01 01:00:24 [465] Disabling HW PID filter for this settopbox (dmhwpidfilter=off)
1970-01-01 01:00:24 [465] in /etc/sundtek.conf
1970-01-01 01:00:24 [465] Device is currently in DVB-C mode
1970-01-01 01:00:24 [465] VTUNER_SET_NAME: Sundtek MediaTV Digital Home (USB 2.0)
1970-01-01 01:00:26 [447] Using /etc/sundtek.conf for deviceconfiguration
2013-09-26 21:45:34 [465] READ: 1649512
2013-09-26 21:45:35 [465] READ: 1691436
2013-09-26 21:45:36 [465] READ: 1694820
2013-09-26 21:45:37 [465] READ: 1695572
2013-09-26 21:45:38 [465] READ: 1693692
2013-09-26 21:45:39 [465] READ: 1686548
2013-09-26 21:45:40 [465] READ: 1682036
2013-09-26 21:45:41 [465] READ: 1697452
2013-09-26 21:45:42 [465] READ: 1688992
2013-09-26 21:45:43 [465] READ: 1692940
2013-09-26 21:45:44 [465] READ: 1695196
2013-09-26 21:45:45 [465] READ: 1685984
2013-09-26 21:45:46 [465] READ: 1704032
2013-09-26 21:45:47 [465] READ: 1692376
2013-09-26 21:45:48 [465] READ: 1703468
2013-09-26 21:45:49 [465] READ: 1689368
2013-09-26 21:45:50 [465] READ: 1692564
2013-09-26 21:45:51 [465] READ: 1687864
2013-09-26 21:45:52 [465] READ: 1698392
2013-09-26 21:45:53 [465] READ: 1695948
2013-09-26 21:45:54 [465] READ: 1692000
2013-09-26 21:45:55 [465] READ: 1695572
2013-09-26 21:45:56 [465] READ: 1693316
2013-09-26 21:45:57 [465] READ: 1691812
2013-09-26 21:45:58 [465] READ: 1696324
2013-09-26 21:45:59 [465] READ: 1691436
2013-09-26 21:46:00 [465] READ: 1708920
2013-09-26 21:46:01 [465] READ: 1685608
2013-09-26 21:46:02 [465] READ: 1697076
2013-09-26 21:46:03 [465] READ: 1703656
2013-09-26 21:46:04 [465] READ: 1687864
2013-09-26 21:46:05 [465] READ: 1698016
2013-09-26 21:46:06 [465] READ: 1690684
2013-09-26 21:46:07 [465] READ: 1700836
2013-09-26 21:46:08 [465] READ: 1690872
2013-09-26 21:46:09 [465] READ: 1692564
2013-09-26 21:46:10 [584] Starting up Multimedia Framework (Sep 26 2013 14:25:25)
2013-09-26 21:46:10 [584] API Version: 5.10
2013-09-26 21:46:10 [585] Starting service processor (PID 585)
2013-09-26 21:46:10 [584] Running on Linux (3.1.1)
2013-09-26 21:46:10 [584] unable to load acceleration module
2013-09-26 21:46:10 [584] scanning devices
2013-09-26 21:46:10 [584] scanning for drivers
2013-09-26 21:46:10 [584] scanning for plugins
2013-09-26 21:46:10 [584] Starting up device manager
2013-09-26 21:46:10 [584] scanning devices done
2013-09-26 21:46:10 [584] attached devices:
2013-09-26 21:46:10 [585] Autostarting scripts in /etc/sundtek/
2013-09-26 21:46:10 [585] executed all available items
2013-09-26 21:46:10 [584] registering ID: 0
2013-09-26 21:46:10 [584] disconnecting kernel driver
2013-09-26 21:46:11 [584] Initial mode requested: DVBC
2013-09-26 21:46:11 [584] attaching DVB-T, DVB-C
2013-09-26 21:46:11 [584] Using second generation demodulator
2013-09-26 21:46:13 [584] SETTING DVB-C
2013-09-26 21:46:13 [584] demodulator successfully attached (DVBC)!
2013-09-26 21:46:13 [584] Allocation using pg for type 65678
2013-09-26 21:46:13 [584] requesting to attach tuner(s) now
2013-09-26 21:46:15 [584] registering: adapter2/0
2013-09-26 21:46:15 [584] registered virtual: /dev/dvb/adapter2/frontend0
2013-09-26 21:46:15 [584] registered virtual: /dev/dvb/adapter2/demux0
2013-09-26 21:46:15 [584] registered virtual: /dev/dvb/adapter2/dvr0
2013-09-26 21:46:15 [584] Setting RC Protocol to NEC
2013-09-26 21:46:15 [584] registered virtual: /dev/mediainput0
2013-09-26 21:46:15 [584] Remote Control Layout: 0
2013-09-26 21:46:15 [585] trying to load uinput module
2013-09-26 21:46:15 [585] loading uinput kernel extention failed, remote control will not work with lirc
2013-09-26 21:46:15 [584] No remote control support available
2013-09-26 21:46:15 [584]
2013-09-26 21:46:15 [584] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2013-09-26 21:46:15 [584] with Sundtek MediaTV only
2013-09-26 21:46:15 [584] Driver loaded within 4758 milliseconds
2013-09-26 21:46:15 [584] Serial(0): U121211082442
2013-09-26 21:46:15 [584] Enabling Dreambox Support for first Adapter (/dev/dvb/adapter2/frontend0)
2013-09-26 21:46:15 [584] Supporting DVB-S/S2 API for Dreambox
2013-09-26 21:46:15 [584] starting up dreambox /dev/dvb/adapter2/frontend0
2013-09-26 21:46:15 [584] Using local device
2013-09-26 21:46:15 [584] Disabling HW PID filter for this settopbox (dmhwpidfilter=off)
2013-09-26 21:46:15 [584] in /etc/sundtek.conf
2013-09-26 21:46:15 [584] Device is currently in DVB-C mode
2013-09-26 21:46:15 [584] VTUNER_SET_NAME: Sundtek MediaTV Digital Home (USB 2.0)
2013-09-26 21:46:17 [572] Using /etc/sundtek.conf for deviceconfiguration
2013-09-26 21:46:20 [637] Starting up Multimedia Framework (Sep 26 2013 14:25:25)
2013-09-26 21:46:20 [637] API Version: 5.10
2013-09-26 21:46:20 [637] Running on Linux (3.1.1)
2013-09-26 21:46:20 [637] unable to load acceleration module
2013-09-26 21:46:20 [637] scanning devices
2013-09-26 21:46:20 [637] scanning for drivers
2013-09-26 21:46:20 [637] scanning for plugins
2013-09-26 21:46:20 [638] Starting service processor (PID 638)
2013-09-26 21:46:20 [637] Starting up device manager
2013-09-26 21:46:20 [637] scanning devices done
2013-09-26 21:46:20 [637] attached devices:
2013-09-26 21:46:20 [638] Autostarting scripts in /etc/sundtek/
2013-09-26 21:46:20 [638] executed all available items
2013-09-26 21:46:20 [637] registering ID: 0
2013-09-26 21:46:20 [637] disconnecting kernel driver
2013-09-26 21:46:21 [637] Initial mode requested: DVBC
2013-09-26 21:46:21 [637] attaching DVB-T, DVB-C
2013-09-26 21:46:21 [637] Using second generation demodulator
2013-09-26 21:46:23 [637] SETTING DVB-C
2013-09-26 21:46:23 [637] demodulator successfully attached (DVBC)!
2013-09-26 21:46:23 [637] Allocation using pg for type 65678
2013-09-26 21:46:23 [637] requesting to attach tuner(s) now
2013-09-26 21:46:25 [637] registering: adapter2/0
2013-09-26 21:46:25 [637] registered virtual: /dev/dvb/adapter2/frontend0
2013-09-26 21:46:25 [637] registered virtual: /dev/dvb/adapter2/demux0
2013-09-26 21:46:25 [637] registered virtual: /dev/dvb/adapter2/dvr0
2013-09-26 21:46:25 [637] Setting RC Protocol to NEC
2013-09-26 21:46:25 [637] registered virtual: /dev/mediainput0
2013-09-26 21:46:25 [637] Remote Control Layout: 0
2013-09-26 21:46:25 [638] trying to load uinput module
2013-09-26 21:46:25 [638] loading uinput kernel extention failed, remote control will not work with lirc
2013-09-26 21:46:25 [637] No remote control support available
2013-09-26 21:46:25 [637]
2013-09-26 21:46:25 [637] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2013-09-26 21:46:25 [637] with Sundtek MediaTV only
2013-09-26 21:46:25 [637] Driver loaded within 4439 milliseconds
2013-09-26 21:46:25 [637] Serial(0): U121211082442
2013-09-26 21:46:25 [637] Enabling Dreambox Support for first Adapter (/dev/dvb/adapter2/frontend0)
2013-09-26 21:46:25 [637] Supporting DVB-S/S2 API for Dreambox
2013-09-26 21:46:25 [637] starting up dreambox /dev/dvb/adapter2/frontend0
2013-09-26 21:46:25 [637] Using local device
2013-09-26 21:46:25 [637] Disabling HW PID filter for this settopbox (dmhwpidfilter=off)
2013-09-26 21:46:25 [637] in /etc/sundtek.conf
2013-09-26 21:46:25 [637] Device is currently in DVB-C mode
2013-09-26 21:46:25 [637] VTUNER_SET_NAME: Sundtek MediaTV Digital Home (USB 2.0)
2013-09-26 21:46:27 [627] Using /etc/sundtek.conf for deviceconfiguration


 



Re: Installation of two usb tuner to Vu Duo #15 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 26 September 2013 - 21:06

so it is using /dev/dvb/adapter2, which is correct.

Re: Installation of two usb tuner to Vu Duo #16 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 26 September 2013 - 21:32

Yes it is
And still only one tuner is available in Configuration List

 

e95343bd2f51t.jpg



Re: Installation of two usb tuner to Vu Duo #17 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 26 September 2013 - 22:40

ok, and that's not the sundtek?

Re: Installation of two usb tuner to Vu Duo #18 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 27 September 2013 - 08:10

No, this is MSI Digivox.
Sundtek looks like this:

 

2c090edbc3dct.jpg



Re: Installation of two usb tuner to Vu Duo #19 pop_eye

  • Senior Member
  • 240 posts

+9
Neutral

Posted 27 September 2013 - 12:10

What do you mean " changing the sundtek with something else"
Not understood

 

Sorry, I do not own a Sundtek, only trying to help - was meant if you can try a different usb tuner any type to confirm.

 

Is the tuner setup in both modes DVB-T and DVB-C and then switched only to one ?

 

If both vtuner0 and vtuner1 are used by one device you will have the behaviour you describe.

 

2013-09-26 21:46:11 [584] attaching DVB-T, DVB-C
2013-09-26 21:46:11 [584] Using second generation demodulator
2013-09-26 21:46:13 [584] SETTING DVB-C
2013-09-26 21:46:13 [584] demodulator successfully attached (DVBC)!
2013-09-26 21:46:13 [584] Allocation using pg for type 65678
2013-09-26 21:46:13 [584] requesting to attach tuner(s) now
2013-09-26 21:46:15 [584] registering: adapter2/0
2013-09-26 21:46:15 [584] registered virtual: /dev/dvb/adapter2/frontend0
2013-09-26 21:46:15 [584] registered virtual: /dev/dvb/adapter2/demux0
2013-09-26 21:46:15 [584] registered virtual: /dev/dvb/adapter2/dvr0



Re: Installation of two usb tuner to Vu Duo #20 westsib

  • Senior Member
  • 52 posts

+2
Neutral

Posted 27 September 2013 - 13:21

Unfortunately I have no other USB tuner. Only Sundtek (dvb-c) and  MSI Digivox (dvb-t).

No, I can`t  switch between the tuner. If both tuners connect, then DVB-T recognizes but works Sundtek... weird right? To force work DVB-T actually, I need to get Sundtek out. So they only work separately from each other.

Yes, I also think that  Sundtek may another usb tuner disturb. Not sure but ...
Incidentally what for DVB-C tuner you use?




7 user(s) are reading this topic

0 members, 7 guests, 0 anonymous users