7 replies to this topic

[wagre]

Hello need some help. My vu + ultimo has 3 tunners dvb-s2. The tunners are commonly recognized, but the slot C signal stops working when I restart the machine or to spend some time using only send it back off and wait a while. Already reversed the tunners not resolved. This is happening with 2 VU + ultimo I have. Suddenly the command "kdvb-ad-0-fe-0" comes running, the signal of C tunner slot zero, and the cpu usage rises to 96%, being necessary to use another tunner for the command to release the cpu. Now I need to turn off the receiver, wait a few minutes for the sign of c tunner return. It seems to be a problem with kernel 3.1.1[attachment=55304:vu+ultimo.png]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Rob van der Does]

Are both your Ultimo's connected to the same (or same type) TV? If so, could you (for testing purposes only) try if using a component or scart connection fixes this issue?

 

This may sound like a strange question, but there are known HDMI-related cases that affect only tuner C.

[wagre]

I will test with another type of output.

[mattiL]

You should probably mask out your dyndns address in the picture to avoid snooping people..

[wagre]

Hello need some help. My vu + ultimo has 3 tunners dvb-s2. The tunners are commonly recognized, but the slot C signal stops working when I restart the machine or to spend some time using only send it back off and wait a while. Already reversed the tunners not resolved. This is happening with 2 VU + ultimo I have. Suddenly the command "kdvb-ad-0-fe-0" comes running, the signal of C tunner slot zero, and the cpu usage rises to 96%, being necessary to use another tunner for the command to release the cpu. Now I need to turn off the receiver, wait a few minutes for the sign of c tunner return. It seems to be a problem with kernel 3.1.1

Edited by wagre, 16 December 2013 - 15:49.

[Pr2]

Hi,

 

I already read this problem a capacitor needs to be unsoldered on the tuner in slot C to fix this issue.

It is an hardware problem.

 

Pr2

[Stefan]

I think you have a vu uno DVB-C tuner and the are bit different then original vu ultimo DVB-C tuner,they look almost the same but they are not the same

Edited by Stefan, 16 December 2013 - 18:42.

[Trial]

Hi,

tuner are the same. There are two version 1 with big capacitor and 1 without. Both work in Uno, Ultimo and Duo2 but on new STBs the capacitor might cause problems.

 

Beside this hardware related problem there is also at least one HDMI problem with my Ultimo. When I connect the Ultimo with 1 special TV (Schaub Lorenz) on 1 certain HDMI port and switch the box on before I switch on the TV then tuner C is completely disabled.

 

ciao