57 replies to this topic

[htc3htc]

 

Thanks dOOds
Da fix

Hi
 
what´s different whit the 1.38c on page 1 and this, i run 4.0 on my duo and works very well

Nothing really modified the init.d file in it to show 1.38 instead of 1.35

OK thank´s

[Erik Slagter]

To be honest this is starting to piss me off.

First you get this attitude
http://openpli.org/f...c/30586-mgcamd/
After I bother to make the changes to mgcamd to bring it up to compatibility with PLi4.0 you then modify to this "reverts commit 2aaeb77eb23f54b9d30c1ab4161be0bb22f3e24a.
Now there are compatibility libs for 0.9.7 and 0.9.8"
you are going backwards to go fowards

Please understand our attitude. mgcamd is not neccessary for any legal TV watching, so we're quite reluctant to support it.

 

Personally I think we shouldn't even include mgcamd in the feeds in the first place, for this reason. There are enough other ways to obtain all softcams one desires.

[MiLo]

After I bother to make the changes to mgcamd to bring it up to compatibility with PLi4.0

Post your changes and i'll include them in the build.

[Alias1]

To be honest this is starting to piss me off.
First you get this attitude
http://openpli.org/f...c/30586-mgcamd/
After I bother to make the changes to mgcamd to bring it up to compatibility with PLi4.0 you then modify to this "reverts commit 2aaeb77eb23f54b9d30c1ab4161be0bb22f3e24a.
Now there are compatibility libs for 0.9.7 and 0.9.8"
you are going backwards to go fowards

Please understand our attitude. mgcamd is not neccessary for any legal TV watching, so we're quite reluctant to support it.
 
Personally I think we shouldn't even include mgcamd in the feeds in the first place, for this reason. There are enough other ways to obtain all softcams one desires.

The same can be said for CCcam and Oscam or any softcam for that matter in fact lets make the readers redundant and force people into buying a cam.
FYI I have found the best combination for using my card is Oscam as the server and mgcamd as the client this clears picture faster than any other combination I have come across

Edited by Alias1, 6 November 2013 - 13:50.

[Alias1]

After I bother to make the changes to mgcamd to bring it up to compatibility with PLi4.0

Post your changes and i'll include them in the build.

Hmmm bit hard to post changes in a binary that I edited

[MiLo]

No problem, just post the changes as a patch to the binary.

Or just post the binary.

Edited by MiLo, 6 November 2013 - 14:11.

[Alias1]

6C69 6263 7279 7074 6F2E 736F 2E30 2E39 2E38      libcrypto.so.0.9.8

 

to

 

6C69 6263 7279 7074 6F2E 736F 2E31 2E30 2E30      libcrypto.so.1.0.0

 

 

Milo each modified binary is included in the ipk files

[theparasol]

FYI I have found the best combination for using my card is Oscam as the server and mgcamd as the client this clears picture faster than any other combination I have come across

 

And exactly what was the last time you tested oscam dvbapi? I overhauled the dvbapi this spring/summer and it zaps faster than ever before. I even included the very efficient CA-pmt code openpli invented quite some time ago.

[Erik Slagter]

FYI I have found the best combination for using my card is Oscam as the server and mgcamd as the client this clears picture faster than any other combination I have come across

 

And exactly what was the last time you tested oscam dvbapi? I overhauled the dvbapi this spring/summer and it zaps faster than ever before. I even included the very efficient CA-pmt code openpli invented quite some time ago.

Is the reverse capmt patch already in the oscam version we supply? Otherwise I think it's worth to bump it.

 

Still I can hardly believe that mgcamd is that much faster zapping than cccam. I am quite convinced there is only one reason why mgcamd still is being used, and even that argument isn't valid, I've been explained (I am not the expert in this area...)

[Robinson]

By the way, where can I read about this reverse capmt patch?

I don't think it's in any way related to doublet's script described here: http://openpli.org/f...ndpost&p=378808

[Erik Slagter]

By the way, where can I read about this reverse capmt patch?

I don't think it's in any way related to doublet's script described here: http://openpli.org/f...ndpost&p=378808

It has nothing to do with encrypted pmt.

[alias haha]

Still I can hardly believe that mgcamd is that much faster zapping than cccam. I am quite convinced there is only one reason why mgcamd still is being used, and even that argument isn't valid, I've been explained (I am not the expert in this area...)

If you never test it, you wil never know...

I also use oscam as a stand alone server and MGcamd as a client on my boxes, CCcam sucks...

[Erik Slagter]

Same counts for oscam, if you never try the newer versions with apparently improved dvbapi support, you'll never know.

[Alias1]

Same counts for oscam, if you never try the newer versions with apparently improved dvbapi support, you'll never know.

Well I have and I can tell you using DVBAPI on channel change SOMTIMES it will hang and take up to 4 seconds to clear picture.

[rodak]

Same counts for oscam, if you never try the newer versions with apparently improved dvbapi support, you'll never know.

Well I have and I can tell you using DVBAPI on channel change SOMTIMES it will hang and take up to 4 seconds to clear picture.

That's some new nasty bug, I have noticed it too in latest svn. A month ago oscam worked liked a charm. Card in solo2, oscam as reader and dvbapi. Now I get a lot of timeouts.
Swedish card for "Canal digital". Try a little bit older oscam (beginning of October for example) and it you will see how fast it is.

[kawa]

Alias 1 can you  modi an mg 1.30d so it working on a 4.0 too

[kalehrl]

I use openpli 3.0 and the old mgcamd 1.35a which I had installed for a long time updated my pure Nagra card just fine.

I did some updates and to my surprise discovered that it was replaced by 1.38c.

It is the end of the month and I need to update my card as soon as possible.

I need the original mgcamd 1.35a which was compiled by mixvt without any modifications from the other devs because that's the only version that sends EMMs to my card.

Other mgcamds are no good for this purpose.

I would be very grateful if somebody could send me the old mgcamd which was on the feeds before all these changes.

Finding the right mgcamd via google is a bloody nightmare.

Mgcamdold, which I installed last night, is 1.35, not 1.35a which I need.

Edited by kalehrl, 1 December 2013 - 08:48.

[kalehrl]

I found the right binary but I no longer get ECM info in the infobar when using mgcamd.

When switching to CCcam, the ecm info is there.