Jump to content


Photo

Vu Solo Open PLI 4 USB Siano tuner problem.

Started by Freon, 09 Oct 2013 10:50

  • Please log in to reply
17 replies to this topic

#1 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 9 October 2013 - 10:50

As the title say I have a small problem with DVB-T USB Siano.

Drivers are installed from the feed, but there is no second tuner....

USB HDD and stick on the same hub are working fine.

Is there any script (cannot find it) to manualy start the driver?


MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #2 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 11 October 2013 - 09:54

Attached File  lsusb.jpg   53.98KB   18 downloadsAnyone?

 


MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #3 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 30 October 2013 - 16:34

cat /proc/bus/nim_sockets

NIM Socket 0:

Type: DVB-S2

Name: BCM7325 DVB-S2 NIM (internal)

Frontend_Device: 0

 

Dirvers are installed from the feed...


MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #4 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 30 October 2013 - 17:26

Maybe if you post dmesg output after reboot it can help.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #5 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 30 October 2013 - 18:42

Here:

[<80307710>] mtd_blktrans_thread+0x230/0x358
[<80043724>] kthread+0x88/0x90
[<800057ec>] kernel_thread_helper+0x10/0x18

NAND registers snapshot

00002800:  00000200  01000000  00000000  1fd00000
00002810:  00000000  40000100  00000001  00000000
00002820:  ffffffff  fffff300  00ffffff  ffffffff
00002830:  ffffffff  ffffffff  ffffffff  ffffffff
00002840:  d3000000  00000000  4232222d  00000000
00002850:  00000000  ecf18015  00000000  00000000
00002860:  00000000  00000000  00000000  1fd00000
00002870:  00000000  1fd00000  00000000  1d6bce00
00002880:  00000000  00000000  00000000  00000000
00002890:  00000000  1fc00010  00000000
brcmnand_read_page: 3: brcmnand_posted_read_cache failed at offset=7d00000, ret=-77
end_request: I/O error, dev mtdblock4, sector 0
Buffer I/O error on device mtdblock4, logical block 0
EXT4-fs (sdb1): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
Adding 131068k swap on /mnt/usb/swap.  Priority:-1 extents:3 across:143356k
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0
[LCD]:dbox_lcd_open

[LCD]:dbox_lcd_ioctl cmd : 4117

[LCD]: unknown cmd 0x1015
[CI]:ci_dev_open

[CI]:Opening A GPIO's for 7325 platform

[CI]:Opening A GPIO's for 7325 platform....done

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:Opening B GPIO's for 7325 platform

[CI]:Opening B GPIO's for 7325 platform....done

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

[CI]:NEXUS_Remux_Start

[CI]:>>close_mpod tuner:0

[CI]:remux stop

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt() count : 0

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt() count : 0

[CI]:>>close_mpod tuner:1

[CI]:remux stop

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt() count : 0

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt count : 0

[CI]:get_remux_startcnt() count : 0

eth0: no IPv6 routers present
[DFP]:scart_select_tvvideotype TV = 2
[DFP]:max9597_fast_blanking data = 0x18
[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]:max9597_enable_output data = 0x3e
[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]:scart_select_tvout aTVOutType = 2
[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[DFP]:scart_select_screentype aRatio = 2
[DFP]:max9597_slow_blanking data = 0x19
[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]:scart_select_screentype aRatio = 2
[DFP]:max9597_slow_blanking data = 0x19
[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]:scart_select_screentype aRatio = 2
[DFP]:max9597_slow_blanking data = 0x19
[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]:scart_select_screentype aRatio = 2
[DFP]:max9597_slow_blanking data = 0x19
[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]:scart_select_screentype aRatio = 2
[DFP]:max9597_slow_blanking data = 0x19
[DFP]: bcm7335_max_i2c_write: Error 1114113

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2056127000
[AUD]: AUDIO_SET_MIXER -2056127000
[CI]:>>slot 1 inserted

[CI]:bm750_slot_reset slot:1
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 6887648
[AUD]: AUDIO_PLAY 6887648 decoder start : 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6887648  0
[VID]: VIDEO_PLAY 6887648  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6887648  1
[AUD]: AUDIO_CONTINUE 6887648 1 audio pid_hndl : 0xc0af97dc
[AUD]: setting mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

0: cannot recognize pc card
[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4


MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #6 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 30 October 2013 - 18:50

I cannot see somethink in the dmesg related with the stick..

Take a look here it has some instructions: http://www.linuxtv.o....php/Smart_Plus
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #7 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 30 October 2013 - 19:07

lsusb lists it ( upper post, small image).

ID is: Bus 003 Device 004: ID 187f:0202

 

 
root@vusolo:~# lsusb -v
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 003 Device 002: ID 05e3:0608
Bus 003 Device 003: ID 067b:2507
Bus 003 Device 004: ID 187f:0202
Bus 003 Device 005: ID 05e3:0608
Bus 003 Device 006: ID 0204:6025
root@vusolo:~#

MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #8 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 30 October 2013 - 19:18

root@vusolo:~# lsusb -v
Bus 001 Device 001: ID 1d6b:0002  -Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002  -Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001  -Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001  -Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 05e3:0608  -Genesys Logic USB-2.0 4-Port HUB
Bus 003 Device 003: ID 067b:2507  -Hi-speed USB HDD
Bus 003 Device 004: ID 187f:0202 -Siano Mobile Silicon Nice
Bus 003 Device 005: ID 05e3:0608  -Genesys Logic USB-2.0 4-Port HUB
Bus 003 Device 006: ID 0204:6025  -Flash drive
root@vusolo:~#
 
I've googled the ID-s.

MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #9 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 1 November 2013 - 18:49

Any ideas people?


MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #10 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 1 November 2013 - 18:54

Post full dmesg after restart!

Please login to your box as soon as possible and get the dmesg output.

The following (from your previous dmesg) might be an kernel error.
[<80307710>] mtd_blktrans_thread+0x230/0x358
[<80043724>] kthread+0x88/0x90
[<800057ec>] kernel_thread_helper+0x10/0x18
dmesg can show also a missing firmware etc etc.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #11 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 1 November 2013 - 19:19

[AUD]: AUDIO_PLAY 6887648 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 6887648  0
[VID]: VIDEO_PLAY 6887648  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6887648  1
[AUD]: AUDIO_CONTINUE 6887648 1 audio pid_hndl : 0xc0af97dc
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[LCD]:bm730_dbox_lcd_write_data
 
[LCD]:vfd reply success
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6887648  1
[AUD]: AUDIO_CONTINUE 6887648 1 audio pid_hndl : 0xc0af97dc
[AUD]: setting mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6887648
[AUD]: AUDIO_CONTINUE 6887648 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SELECT_SOURCE 1
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_SET_BYPASS_MODE 11
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PLAY 11 decoder start : 0
[AUD]: AUDIO_PLAY : Starting Playpump
[AUD]: AUDIO_CONTINUE 1965362120 1 audio pid_hndl : 0x0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_STOP 1965362120
[AUD]: AUDIO_SELECT_SOURCE 0
[DFP]:scart_select_tvout aTVOutType = 1
[LCD]:bm730_dbox_lcd_write_data
 
[LCD]:vfd reply success
 
[LCD]:bm730_dbox_lcd_write_data
 
[LCD]:vfd reply success
 
[LCD]:bm730_dbox_lcd_write_data
 
[LCD]:vfd reply success
 
[LCD]:bm730_dbox_lcd_write_data
 
[LCD]:vfd reply success
 
[LCD]:bm730_dbox_lcd_write_data
 
[LCD]:vfd reply success
 
bcm7325: hotplug_callback():
Hotplug - status.connected 0
bcm7325: hotplug_callback():
Hotplug - Disconnecting HDMI from display
bcm7325: hotplug_callback():
Hotplug - status.connected 0
bcm7325: hotplug_callback():
Hotplug - status.connected 0
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
[LCD]:bm730_dbox_lcd_write_read_data len: 8
 
[LCD]:rtc data received 4
 
root@vusolo:~#

MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #12 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 1 November 2013 - 19:26

There is no messages related with dvb-usb.

Either you perform dmesg command too late either dvb-usb is not working. No other ideas.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #13 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 1 November 2013 - 19:31

The thing that troubles me is that on BH image it works, but I prefer Open PLI :)

So I was thinkin is there a script or some command to start it manualy throu telnet.

Or to write a script in the init.d to push it to work.


MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #14 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 30 November 2013 - 13:47

After a while and some struggle with my Siano DVB-T I have found a solution.

Simple by adding "modprobe smsdvb"  line into /init.d boot sequence I have a working state of DVB-T.

 

It would be nice if this could be in next upgrade.


MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #15 maunti

  • Member
  • 2 posts

0
Neutral

Posted 30 November 2013 - 19:14

Hello Freon

 

I have a simular Problem with my DVB-T stick. The box is a VU+Solo2 and i have try BH and VTI Image and the DVB-t tuner works well. With openpli no luck. Ist the same as your Problem. My question is, where and what you had insert? Was it the bootmisc.sh file you had insert modprobe smsdvb?


Re: Vu Solo Open PLI 4 USB Siano tuner problem. #16 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 30 November 2013 - 19:47

First try throu telnet modprobe your model ,and restart enigma. If ok enter the same line in one of scripts in init.d

MAY THE FORCE BE WITH YOU!

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #17 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 24 January 2014 - 10:25

This should have been fixed with patches from athoik lately.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Vu Solo Open PLI 4 USB Siano tuner problem. #18 Freon

  • Senior Member
  • 216 posts

+2
Neutral

Posted 24 January 2014 - 11:12

And yes it is. Siano is added to startup.


MAY THE FORCE BE WITH YOU!

Back to [EN] Enduser support

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support