Posted 19 November 2013 - 09:16
Can anyone please guide this newby to a how to or what to, to activate 1080P resolution in my DM800HDse dreambox please.
My Box has enigma 2 and openpli 3.0, and seller says do NOT update software.
Thanx for all efforts
Rob
Edited by cooknl, 19 November 2013 - 09:20.
Posted 19 November 2013 - 09:25
You can't. The hardware does not support it
http://www.datasheet...DSA00437494.pdf
http://www.avs.org.c...7405-PB04-R.pdf
Posted 19 November 2013 - 09:36
With the "AutoResolutin" Plugin you can configure the box so that it will output in 1080p when you play 1080p(rogressive) content, like *.mkv files or whatever. Everything else doesn't make much sense ...
Posted 19 November 2013 - 09:50
You're all missing the point.
Older receivers, like the dm800, actually can output 1080p, BUT it's 1080p25. There is no advantage whatsoever to use 1080p25, at any time. If you have 1080p25 material, it can be played using 1080i50 equally well, you won't see the difference. On the other hand 1080i50 material will be deinterlaced when output as 1080p25 and you WILL loose smoothness of moition.
So, no point in doing it, really. And that's why enigma doesn't offer the choice, even though it's possible.
For newer receivers, you can enable 1080p50, which may or may not give better motion smoothness, depending on what's connected. On a computer monitor (no interlaced input) it will definitely be better, on a TV set probably not, given the fact that all media are still 1080i50 and not 1080p50. If you have true 1080p50 media (which is really rare), you should output it at 1080p50.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 19 November 2013 - 10:00
You're all missing the point.
Older receivers, like the dm800, actually can output 1080p, BUT it's 1080p25. There is no advantage whatsoever to use 1080p25, at any time. If you have 1080p25 material, it can be played using 1080i50 equally well, you won't see the difference. On the other hand 1080i50 material will be deinterlaced when output as 1080p25 and you WILL loose smoothness of moition.
So, no point in doing it, really. And that's why enigma doesn't offer the choice, even though it's possible.
For newer receivers, you can enable 1080p50, which may or may not give better motion smoothness, depending on what's connected. On a computer monitor (no interlaced input) it will definitely be better, on a TV set probably not, given the fact that all media are still 1080i50 and not 1080p50. If you have true 1080p50 media (which is really rare), you should output it at 1080p50.
Ok thx for this well presented information.
Now the question is which newer dreambox does support 1080P50 do you have any idea because the specs dont even mention it.
Is it a special version of a video chip that should be in the box or how can we tell ??
Thanx for any info you might have.
Rob
Posted 19 November 2013 - 10:08
According to http://openpli.org/wiki/comparison, only the XP1000, the VU+ Solo2 and Duo2 are capable of 1080p50.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 November 2013 - 10:13
According to http://openpli.org/wiki/comparison only the XP1000, the VU+ Solo2 and Duo2 are capable of 1080p50.
Posted 19 November 2013 - 10:14
Issue with the forum software, it's without the comma at the end: http://openpli.org/wiki/comparison
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 November 2013 - 11:26
Thx got it
Posted 19 November 2013 - 11:35
The et4000 can also do 1050p50, btw. If it's not in the sheet it, should be correct.
But then again, why would you care?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 19 November 2013 - 21:49
According to http://openpli.org/wiki/comparison, only the XP1000, the VU+ Solo2 and Duo2 are capable of 1080p50.
The et4000 can also do 1050p50, btw. If it's not in the sheet it, should be correct.
Indeed, and also 1080p60 for all three boxes.
Posted 19 November 2013 - 21:56
As documented in the wiki. I must have overlooked it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 7 guests, 0 anonymous users
