Jump to content


Photo

Getting WandTV DVB-T Stick To Work OpenPli 4.0

dvb-t dvb tuner

  • Please log in to reply
34 replies to this topic

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #21 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 12 March 2014 - 12:50

hi athoik / pli team

really appreciate your efforts - but sadly it didnt work - first thing i did after reboot was to go into service --
> searching --- tuners .... and in here the tuner should show up - but it was just the S2 tuner

 

heres a suggestion - a quicker way to get this to work might be if i posted one of you my Wand TV device - i'll pay for all postage costs - to and from the recipient - no problems via paypal therefore you would have an actual device to test with - unfortunately i couldnt post my reciever as i need that - but any takers that want to experiment with the Wand DVB-T stick i'll gladly post it to you and pay for postage to and from you

any takers ? :)

thanks



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #22 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 12 March 2014 - 16:48

Can you paste full dmesg log once again (using the image with patched kernel)?

Even if you send me your dvb-t stick, it's not going to work since i do not have the same hardware..
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #23 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 12 March 2014 - 18:09

hi athoik thanks 
2 questions
 
1. the box that you have does it run a version of OpenPli 4. ? - the reason i ask is that surely OpenPli while having different forms among various brands - is essentially the same in terms of the basic structure of the kernel / and how drivers are implemented - regardless of hardware ?
my thoughts are if if you could get the Wand TV stick working on your box running OpenPli4 - then you could send me an image again based on your changes to your own box - but slightly modified for an Xp1000  - based on a successful change to your box which allows Wand ~TV to work - would this make sense - maybe not - just a thought - might be quicker for you to test using this process ?
 
2. yes certainly will have a look at dmesg again soon but I have to keep flashing back my backup image to watch something on TV 
so question is for example if you attempt changes - is there any method that I can use to integrate those changes to my own EXISTING image or do the changes you make have to intergrate into a fresh nightly build - ie if the changes you make affect the KERNEL - does that mean i can upgrade my KERNEL ONLY on  my own image??- this would mean i could keep my existing channels / settings mount points if i want to watch / record something and STILL TEST your changes with dmesg without having to load your image to test then reload my image to watch TV etc etc ? is this possible ?
 
thanks


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #24 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 12 March 2014 - 20:38

Every box has different kernel and that's why your stick stopped working (after xp switched to 3.12 kernel). So testing something on different kernel (eg DMM 3.2 kernel) certenly will produce different results.

After the problem is located and solved (most probably with a kernel patch that will be included in OpenPLi afterwards) then you will be able to use without a problem your favorite image.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #25 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 12 March 2014 - 23:47

hi all 

there must be SOMEONE on the development team who would have a max digital XP1000 / Octagon SF8 box - or who knows someone with this box that could test my dvb-t dongles if i sent them one (or both)  - also have a kworld 395U model which isnt working - and also have a freecom dvb-t dongle which i need to test as well 

its impossible to keep switching images like this :) - surely 3.12 kernel could be tested on ANY enigma2 box with these dongles - although i will shut up now because this as far as my knowledge carries :)



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #26 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 13 March 2014 - 02:23

athoik / pli team

latest dmesg from athoiks image 

 

again i have to post it like this as i can find no attach file option - thank you all - tuner doesnt appear under ... service - searching- tuner config

 

BELOW

 

Linux version 3.12.1 (athoik@pc) (gcc version 4.8.2 (GCC) ) #1 Mon Mar 3 10:28:53 EET 2014
Fetching vars from bootloader... found 7 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
         sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
CPU revision is: 00029032 (Broadcom BMIPS3300)
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 232 MB LINUX region at 7 MB (0x0e853000@0x007ad000)
bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 8075a1e0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null consoleblank=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235608K/262144K available (6046K kernel code, 283K rwdata, 1188K rodata, 212K init, 113K bss, 26536K reserved)
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 501 MHz (250.512 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 497.66 BogoMIPS (lpj=248832)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
msgmni has been set to 460
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
Config internal EPHY through MDIO
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
EBI CS2: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-15
 
Bad block table not found for chip 0
Bad block table not found for chip 0
Scanning device for bad blocks
usb 1-1: new high-speed USB device number 2 using ehci-brcm
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi0 : usb-storage 1-1:1.0
Bad block table written to 0x000007fe0000, version 0x01
Bad block table written to 0x000007fc0000, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000008000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
usb 1-2: new high-speed USB device number 3 using ehci-brcm
0x000000600000-0x000008000000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: scanning is finished
UBI: volume 0 ("rootfs") re-sized from 446 to 952 LEBs
UBI: attached mtd2 (name "rootfs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 972, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1474275463
UBI: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 43
scsi 0:0:0:0: Direct-Access     SanDisk  Cruzer Micro     2033 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 512000 512-byte logical blocks: (262 MB/250 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda:
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
UBIFS: background thread "ubifs_bgt0_0" started, PID 45
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 119484416 bytes (113 MiB, 941 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 8D4DD578-0961-463B-BEB9-AF9792848832, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 212K (8075b000 - 80790000)
Algorithmics/MIPS FPU Emulator v1.5
FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usbcore: registered new interface driver tpm
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c-core: driver [ch455] using legacy suspend method
i2c-core: driver [ch455] using legacy resume method
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
eth0 Link DOWN.
eth0 Link UP.
Auto config phy
eth0: Link is up, 100 Mbps Full Duplex
NET: Registered protocol family 10
Console: switching to colour frame buffer device 160x45
Console: switching to colour dummy device 80x25
usb 1-1: USB disconnect, device number 2
usb 1-1: new high-speed USB device number 4 using ehci-brcm
usb 1-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
usb 1-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in cold state
usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
usb 1-1: dvb_usb_af9035: firmware version=12.13.15.0
usb 1-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in warm state
usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Afatech AF9035 reference design)
DVB: Unable to find symbol af9033_attach()
usbcore: registered new interface driver dvb_usb_af9035


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #27 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 13 March 2014 - 18:39

usb 1-1: USB disconnect, device number 2
usb 1-1: new high-speed USB device number 4 using ehci-brcm
usb 1-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
usb 1-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in cold state
usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
usb 1-1: dvb_usb_af9035: firmware version=12.13.15.0
usb 1-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in warm state
usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Afatech AF9035 reference design)
DVB: Unable to find symbol af9033_attach()
usbcore: registered new interface driver dvb_usb_af9035

Actually dvb-t stick was recognized using my patch as you can see above.

Probably you are missing a demodulator kernel module (because of line: Unable to find symbol af9033_attach).

So ask from OpenPLi to include my kernel patch and install demodulator kernel modules. Or tell me what demodulator your dvb-t stick uses and i will upload the ipk for the image i build for you.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #28 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 13 March 2014 - 22:28

Hi Athoik / OpenPli Team

 

heres what i can find

 

A combination DVB-T demodulator and USB bridge chip from Afatech. This is the company's third generation COFDM demodulator,

 

at the top of this page link below it says the demodulator is AF9035

 

http://www.linuxtv.o...Cap_DVB_T_Stick

 

the EZCap stick seems to be the same hardware id as mine 15a4:1001

 

according to the info at that link  Fiti Power FC0011 seems to be the tuner type


Edited by dmm1000, 13 March 2014 - 22:30.


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #29 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 14 March 2014 - 16:53

Try again using this image: openpli-4-xp1000_usb.zip 48.3 MB


Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #30 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 14 March 2014 - 18:06

thanks for your efforts athoik

 

im wondering have you enough information  to decide how to choose / implement the correct demodulator code / software or whatever - i could find very little info on google for my post #28

 

i also tried a vix image just as a test - it also used 3.12.1 kernel - same problem as expected

 

anyway here is the latest full dmesg below from your post #29 image - tuner does not show

 

Linux version 3.12.1 (athoik@pc) (gcc version 4.8.2 (GCC) ) #1 Mon Mar 3 10:28:53 EET 2014
Fetching vars from bootloader... found 7 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
         sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
CPU revision is: 00029032 (Broadcom BMIPS3300)
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 232 MB LINUX region at 7 MB (0x0e853000@0x007ad000)
bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 8075a1e0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null consoleblank=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235608K/262144K available (6046K kernel code, 283K rwdata, 1188K rodata, 212K init, 113K bss, 26536K reserved)
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 501 MHz (250.500 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 497.66 BogoMIPS (lpj=248832)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
msgmni has been set to 460
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
Config internal EPHY through MDIO
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
EBI CS2: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-15
 
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000008000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000008000000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
usb 1-1: new high-speed USB device number 2 using ehci-brcm
usb 1-2: new high-speed USB device number 3 using ehci-brcm
UBI: scanning is finished
UBI: attached mtd2 (name "rootfs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 972, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 433370948
UBI: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 41
UBIFS: background thread "ubifs_bgt0_0" started, PID 42
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 119484416 bytes (113 MiB, 941 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID D7A40B46-C1E5-4B1D-AA51-D551A833DDCD, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 212K (8075b000 - 80790000)
Algorithmics/MIPS FPU Emulator v1.5
usbcore: registered new interface driver tpm
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c-core: driver [ch455] using legacy suspend method
i2c-core: driver [ch455] using legacy resume method
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
usb 1-1: dvb_usb_v2: 2nd usb_bulk_msg() failed=-145
dvb_usb_af9035: probe of 1-1:1.0 failed with error -145
usbcore: registered new interface driver dvb_usb_af9035
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
eth0 Link DOWN.
eth0 Link UP.
Auto config phy
eth0: Link is up, 100 Mbps Full Duplex
NET: Registered protocol family 10


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #31 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 14 March 2014 - 18:43

Again stick was recognized,but i think using it913x drivers!!! because i included more demodulators and tuners into the image.

 

Try the following:

 

 

opkg remove enigma2-plugin-drivers-dvb-usb-it913x
reboot

 

Additonally provide lsmod command output to see what modules it is loading.

 

PS. In any case usb stick is not recognized as input device, so please add kernel patch


Edited by athoik, 14 March 2014 - 18:47.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #32 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 14 March 2014 - 19:45

by the way just for information - i have a fedora PC which this tuner works on 

here is the kernel version of Fedora = 3.12.10-300.fc20.x86_64

 

 

am just wondering about lsmod just below  - should dvb_usb_af9035 be used by dvb_usb_af9035 instead of used by 0 ? - see line 2 of lsmod output

 

Module                        Size             Used by
ipv6                              337278         14 
dvb_usb_af9035           13191          0 
dvb_usb_v2                  14606          1 dvb_usb_af9035
dvb                                6632077      3 
xp1000_3                      32590          1 dvb
xp1000_2                      22309          0 
xp1000_1                        6729          3 dvb,xp1000_2,xp1000_3
 
full dmesg
 
Linux version 3.12.1 (athoik@pc) (gcc version 4.8.2 (GCC) ) #1 Mon Mar 3 10:28:53 EET 2014
Fetching vars from bootloader... found 7 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
         sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
CPU revision is: 00029032 (Broadcom BMIPS3300)
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 232 MB LINUX region at 7 MB (0x0e853000@0x007ad000)
bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 8075a1e0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null consoleblank=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235608K/262144K available (6046K kernel code, 283K rwdata, 1188K rodata, 212K init, 113K bss, 26536K reserved)
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 501 MHz (250.503 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 497.66 BogoMIPS (lpj=248832)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
msgmni has been set to 460
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
Config internal EPHY through MDIO
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
EBI CS2: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-15
 
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000008000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000008000000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
usb 1-1: new high-speed USB device number 2 using ehci-brcm
usb 1-2: new high-speed USB device number 3 using ehci-brcm
UBI: scanning is finished
UBI: attached mtd2 (name "rootfs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 972, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 433370948
UBI: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 41
UBIFS: background thread "ubifs_bgt0_0" started, PID 42
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 119484416 bytes (113 MiB, 941 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID D7A40B46-C1E5-4B1D-AA51-D551A833DDCD, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 212K (8075b000 - 80790000)
Algorithmics/MIPS FPU Emulator v1.5
usbcore: registered new interface driver tpm
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c-core: driver [ch455] using legacy suspend method
i2c-core: driver [ch455] using legacy resume method
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
usb 1-1: dvb_usb_v2: 2nd usb_bulk_msg() failed=-145
dvb_usb_af9035: probe of 1-1:1.0 failed with error -145
usbcore: registered new interface driver dvb_usb_af9035
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
eth0 Link DOWN.
eth0 Link UP.
Auto config phy
eth0: Link is up, 100 Mbps Full Duplex
NET: Registered protocol family 10
 
 


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #33 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 14 March 2014 - 23:27

just a selection of the dmesg output from my Fedora PC (dmesg | grep dvb) as it detects and installs the Wand TV dvb-t device

 

in case there are any clues in there that would help

 

4961.686715] usb 1-3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[ 4961.687083] usb 1-3: dvb_usb_v2: found a 'Afatech AF9035 reference design' in cold state
[ 4961.707007] usb 1-3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[ 4962.009073] usb 1-3: dvb_usb_af9035: firmware version=12.13.15.0
[ 4962.009100] usb 1-3: dvb_usb_v2: found a 'Afatech AF9035 reference design' in warm state
[ 4962.011301] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 4962.142333] usb 1-3: dvb_usb_v2: 'Afatech AF9035 reference design' successfully initialized and connected
[ 4962.142436] usbcore: registered new interface driver dvb_usb_af9035


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #34 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 23 March 2014 - 00:51

i want to thank athoik for his personal efforts with my issue

i'm going to live with this for now 

but i plead with you Open Pli team please please rectify this issue

i have 3 dvb-t tuners - none of which work with the latest openpli4 updates

freecom / kworld 395U / Wand TV

there are i'm sure 100's of other  customers - maybe 1000's with a mixture of DVB-T usb devices that cannot use them on their images / sat boxes

PLEASE    - fix as soon  as you can - thanks everyone  :)


Edited by dmm1000, 23 March 2014 - 00:52.


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #35 quello68

  • Member
  • 5 posts

0
Neutral

Posted 4 July 2014 - 12:47

hello 
having octagon SF8 can not install AVerMedia a867 blue LED ... 
how can I fix it?



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users