68 replies to this topic

[dolphs]

yip fw issue, which got sorted:

 

 

<snip snip>

 

Resolving deltas: 100% (273587/273587), done.
Checking connectivity... done
Checking out files: 100% (24960/24960), done.
cd /u01/openpli/openembedded && ( \
        if [ -n "" ]; then git config user.email ""; fi; \
        if [ -n "" ]; then git config user.name ""; fi; \
    )

Openembedded for the OpenPLi 2.1 environment has been initialized
properly. Now you can start building your image, by doing either:

 make -f Makefile-2.1 image
    or
 cd build-dm8000 ; source env.source ; bitbake openpli-enigma2-image

and after 'some time' you should find your image (.nfi) in
build-dm8000/tmp/deploy/images/
 

[dolphs]

1st testbuild came far :-) :

 

NOTE: package linux-libc-headers-native-2.6.30-r2: task do_fetch: Succeeded
ERROR: 'virtual:native:/u01/openpli/openembedded/recipes/gnu-config/gnu-config_git.bb' failed
make: *** [image] Error 1

[dolphs]

OK rerunning " make -f Makefile-2.1 image " seems to stall on mpfr_3.0.0.bb-package and gnu-config_git.bb

 

<snip snip>

 

 --2013-11-23 06:25:41--  (try: 6)  http://www.mpfr.org/...r-3.0.0.tar.bz2
 Connecting to www.mpfr.org (www.mpfr.org)|152.81.144.6|:80... failed: Connection timed out.
 Retrying.
 

<snip snip>

 

 Connecting to sources.openembedded.org (sources.openembedded.org)|140.211.169.152|:80... connected.
 HTTP request sent, awaiting response... 404 Not Found
 2013-11-23 06:30:08 ERROR 404: Not Found.
 
NOTE: package mpfr-native-3.0.0-r3.1: task Fetch failed: Unable to fetch URL http://www.mpfr.org/...r-3.0.0.tar.bz2 from any source.: Failed
ERROR: Function 'Fetch failed: Unable to fetch URL http://www.mpfr.org/...r-3.0.0.tar.bz2 from any source.' failed
ERROR: Task 1137 (virtual:native:/u01/openpli/openembedded/recipes/mpfr/mpfr_3.0.0.bb, do_fetch) failed with exit code '1'
ERROR: 'virtual:native:/u01/openpli/openembedded/recipes/gnu-config/gnu-config_git.bb' failed
ERROR: 'virtual:native:/u01/openpli/openembedded/recipes/mpfr/mpfr_3.0.0.bb' failed
make: *** [image] Error 1
 

Edited by dolphs, 23 November 2013 - 05:32.

[Erik Slagter]

There you go

 

Unpack in the "sources" directory.

Attached Files

•  mpfr.zip   1.09MB   21 downloads

Edited by Erik Slagter, 23 November 2013 - 10:19.

[dolphs]

OK some more disturbances grepping on ERROR:

 

 

ERROR: Function 'Fetch failed: Unable to fetch URL http://www.angstrom-...f6de64f0.tar.gz from any source.' failed
ERROR: Task 1016 (virtual:native:/u01/openpli/openembedded/recipes/gnu-config/gnu-config_git.bb, do_fetch) failed with exit code '1'
ERROR: 'virtual:native:/u01/openpli/openembedded/recipes/gnu-config/gnu-config_git.bb' failed
 

 

some output:

 

<snip snip>

 

NOTE: package gnu-config-native-git-r1+gitre35217687ee5f39b428119fe31c7e954f6de64f0: task Fetch failed: Unable to fetch URL http://www.angstrom-...f6de64f0.tar.gz from any source.: Failed

ERROR: Function 'Fetch failed: Unable to fetch URL http://www.angstrom-...f6de64f0.tar.gz from any source.' failed
 

<snip snip>

 

NOTE: package gettext-0.18-r5: task do_patch: Succeeded
NOTE: package linux-libc-headers-2.6.18-r6: task do_install: Started
NOTE: Running task 198 of 3513 (ID: 1795, /u01/openpli/openembedded/recipes/expat/expat_2.0.1.bb, do_patch)
NOTE: package gtk-doc-native-1.0-r3: task do_fetch: Started
NOTE: package gtk-doc-native-1.0-r3: task do_fetch: Succeeded
ERROR: Task 1016 (virtual:native:/u01/openpli/openembedded/recipes/gnu-config/gnu-config_git.bb, do_fetch) failed with exit code '1'
Waiting for 2 active tasks to finish:
0: linux-libc-headers-2.6.18-r6 do_install (pid 21289)
1: gcc-cross-4.4.4-r8.1 do_unpack (pid 20506)
Waiting for 3 active tasks to finish:
0: expat-2.0.1-r3.0 do_patch (pid 21541)
1: linux-libc-headers-2.6.18-r6 do_install (pid 21289)
2: gcc-cross-4.4.4-r8.1 do_unpack (pid 20506)
NOTE: package expat-2.0.1-r3.0: task do_patch: Started
Waiting for 2 active tasks to finish:
0: linux-libc-headers-2.6.18-r6 do_install (pid 21289)
1: gcc-cross-4.4.4-r8.1 do_unpack (pid 20506)
NOTE: package expat-2.0.1-r3.0: task do_patch: Succeeded
Waiting for 1 active tasks to finish:
0: gcc-cross-4.4.4-r8.1 do_unpack (pid 20506)
NOTE: package linux-libc-headers-2.6.18-r6: task do_install: Succeeded
NOTE: package gcc-cross-4.4.4-r8.1: task do_unpack: Succeeded
ERROR: 'virtual:native:/u01/openpli/openembedded/recipes/gnu-config/gnu-config_git.bb' failed
 

[Erik Slagter]

I think you're missing this one.

Attached Files

•  git_git.zip   46.7KB   24 downloads

[dolphs]

yup and another one, bold I think is critical the first ones I consider as a warning ...

 

 

ERROR: Logfile of failure stored in: /u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/temp/log.do_compile.19072
ERROR: Function 'do_compile' failed (see /u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/temp/log.do_compile.19072 for further information)

ERROR: Task 2683 (/u01/openpli/openembedded/recipes/m4/m4-native_1.4.14.bb, do_compile) failed with exit code '1'
ERROR: Function 'Fetch failed: Unable to fetch URL http://trappist.elis...-2.6.18.tar.bz2 from any source.' failed
ERROR: Task 1937 (/u01/openpli/openembedded/recipes/linux/linux-dm8000_2.6.18.bb, do_fetch) failed with exit code '1'
ERROR: '/u01/openpli/openembedded/recipes/m4/m4-native_1.4.14.bb' failed
ERROR: '/u01/openpli/openembedded/recipes/linux/linux-dm8000_2.6.18.bb' failed
 

[Erik Slagter]

Try this one

Attached Files

•  cdfs.zip   30.01KB   15 downloads

[dolphs]

yup that is one of them, m4 seems to be other piece missing ( see also my previous post )

 

ERROR: Logfile of failure stored in: /u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/temp/log.do_compile.19621
ERROR: Function 'do_compile' failed (see /u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/temp/log.do_compile.19621 for further information)
ERROR: Task 2683 (/u01/openpli/openembedded/recipes/m4/m4-native_1.4.14.bb, do_compile) failed with exit code '1'
ERROR: '/u01/openpli/openembedded/recipes/m4/m4-native_1.4.14.bb' failed
 

[Erik Slagter]

I can't see a url from a .bb file name... I need the url.

[dolphs]

Yet things get a little tricky as an URL cannot be identified, seems to be the build process thait fails due to dependencies and files not being created, therefore this time attached full output file hoping this can be identified rather easy ..

Attached Files

•  output.zip   3.17KB   6 downloads

[Erik Slagter]

Here we have a problem:

| make[3]: Entering directory `/u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/m4-1.4.14/lib'| gcc -std=gnu99  -I.   -isystem/u01/openpli/build-dm8000/tmp/sysroots/x86_64-linux/usr/include  -isystem/u01/openpli/build-dm8000/tmp/sysroots/x86_64-linux/usr/include -O2 -g -MT clean-temp.o -MD -MP -MF .deps/clean-temp.Tpo -c -o clean-temp.o clean-temp.c
| In file included from clean-temp.h:22:0,
|                  from clean-temp.c:23:
| ./stdio.h:143:1: error: 'gets' undeclared here (not in a function)
|  _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
|  ^
| make[3]: *** [clean-temp.o] Error 1

I am not sure how to fix this, it's something in the target environment. You may need to cleanout "tmp" and start again building.

Edited by Erik Slagter, 24 November 2013 - 11:47.

[dolphs]

yup did that and even removed m4 to get it back in again, similar result.

Will dig in to it further later today, hopefully will find something

Attached Files

•  output.zip   13.85KB   5 downloads

Edited by dolphs, 24 November 2013 - 12:59.

[Erik Slagter]

Then yes it may be something of the native environment, too old or too new.

[dolphs]

Just switched to my good old Squeeze ( Debian ) VM and following errors popped up (below)...

Will do some googling to find these specific packages and will report back :-)

 

NOTE: package pkgconfig-native-0.23-r8.1: task do_configure: Started
--2013-11-24 15:32:34--  http://www.mirrorser...ng-2.18.tar.bz2
 Resolving www.mirrorservice.org... 212.219.56.184, 212.219.56.184
 Connecting to www.mirrorservice.org|212.219.56.184|:80... connected.
 HTTP request sent, awaiting response... 404 Not Found
 2013-11-24 15:32:34 ERROR 404: Not Found.

 

Connecting to mirrors.openembedded.org|82.197.159.157NOTE: package libpng-1.5.10-r3.1: task Fetch failed: Unable to fetch URL ftp://ftp.simplesystems.org/pub/png/src/libpng-1.5.10.tar.bz2;name=libpng from any source.: Failed
ERROR: Function 'Fetch failed: Unable to fetch URL ftp://ftp.simplesystems.org/pub/png/src/libpng-1.5.10.tar.bz2;name=libpng from any source.
' failed
NOTE: package util-linux-ng-2.18-r36.0: task Fetch failed: Unable to fetch URL http://www.mirrorser...z2;name=archive from any source.: Failed
 

ERROR: Function 'Fetch failed: Unable to fetch URL http://www.mirrorser...z2;name=archive from any source.' failed
ERROR: Task 1272 (/home/openpli/openembedded/recipes/libpng/libpng_1.5.10.bb, do_fetch) failed with exit code '1'
Waiting for 3 active tasks to finish:




 

Edited by dolphs, 24 November 2013 - 15:45.

[pieterg]

Happens all the time, download urls change. Just google for those tarballs, and download them from somewhere else.

[dolphs]

Actually seems to be some progress using debian 6.0.8 - my VM env also used to build OSCam -  I am half way as it seems

 

<snip snip>

NOTE: package binutils-cross-2.22-r13.1: task do_build: Succeeded
NOTE: Running task 1542 of 3513 (ID: 1127, /home/openpli/openembedded/recipes/binutils/binutils-cross_2.22.bb, do_rm_work)
NOTE: package binutils-cross-2.22-r13.1: task do_rm_work: Started
NOTE: package binutils-cross-2.22-r13.1: task do_rm_work: Succeeded

...

...

 

Packages leeched/ obtained so far and md5-ed manually:

 

-rw-r--r--  1 openpli openpli   77530 Nov 25 20:22 base-passwd_3.5.24.tar.gz
-rw-r--r--  1 openpli openpli      60 Nov 25 20:22 base-passwd_3.5.24.tar.gz.md5
-rw-r--r--  1 openpli openpli 1106203 Nov 25 20:30 bluez-4.84.tar.gz
-rw-r--r--  1 openpli openpli      52 Nov 25 20:30 bluez-4.84.tar.gz.md5
-rw-r--r--  1 openpli openpli   30339 Nov 25 07:01 cdfs-2.6.18.tar.bz2
-rw-r--r--  1 openpli openpli      32 Nov 25 07:01 cdfs-2.6.18.tar.bz2.md5
-rw-r--r--  1 openpli openpli   47171 Nov 25 07:01 git_git.savannah.gnu.org.config.git_e35217687ee5f39b428119fe31c7e954f6de64f0.tar.gz
-rw-r--r--  1 openpli openpli      32 Nov 25 07:01 git_git.savannah.gnu.org.config.git_e35217687ee5f39b428119fe31c7e954f6de64f0.tar.gz.md5
-rw-r--r--  1 openpli openpli 7288167 Nov 25 07:01 gnutls-2.10.4.tar.bz2
-rw-r--r--  1 openpli openpli      56 Nov 25 07:01 gnutls-2.10.4.tar.bz2.md5
-rw-r--r--  1 openpli openpli   53629 Nov 25 07:01 libcap-2.20.tar.bz2
-rw-r--r--  1 openpli openpli      54 Nov 25 07:01 libcap-2.20.tar.bz2.md5
-rw-r--r--  1 openpli openpli  875183 Nov 25 07:01 libpng-1.5.10.tar.bz2
-rw-r--r--  1 openpli openpli      56 Nov 25 07:01 libpng-1.5.10.tar.bz2.md5
-rw-r--r--  1 openpli openpli 1138685 Nov 25 07:01 mpfr-3.0.0.tar.bz2
-rw-r--r--  1 openpli openpli      32 Nov 25 07:01 mpfr-3.0.0.tar.bz2.md5
-rw-r--r--  1 openpli openpli 7669676 Nov 25 07:01 util-linux-ng-2.18.tar.bz2
-rw-r--r--  1 openpli openpli      61 Nov 25 07:01 util-linux-ng-2.18.tar.bz2.md5
 

[dolphs]

Dichtbij het vuur:

 

:~$ grep ERROR output.txt
ERROR: Logfile of failure stored in: /home/openpli/build-dm8000/tmp/work/dm8000-oe-linux/openpli-enigma2-image-1.0-r0/temp/log.do_rootfs.6522
ERROR: Function 'do_rootfs' failed (see /home/openpli/build-dm8000/tmp/work/dm8000-oe-linux/openpli-enigma2-image-1.0-r0/temp/log.do_rootfs.6522 for further information)
ERROR: Task 12 (/home/openpli/openembedded/recipes/images/openpli-enigma2-image.bb, do_rootfs) failed with exit code '1'
ERROR: '/home/openpli/openembedded/recipes/images/openpli-enigma2-image.bb' failed
 

 

cat /home/openpli/build-dm8000/tmp/work/dm8000-oe-linux/openpli-enigma2-image-1.0-r0/temp/log.do_rootfs.6522

<snip snip>

 

Configuring enigma2-plugin-systemplugins-videotune.
Configuring enigma2-plugin-extensions-audiosync.
Collected errors:
 * opkg_install_cmd: Cannot install package enigma2-plugin-extensions-ppanel.
 * opkg_install_cmd: Cannot install package enigma2-plugin-extensions-autobackup.
 * opkg_install_cmd: Cannot install package enigma2-plugin-extensions-openwebif.
 

[Erik Slagter]

Ik denk dat je even wat dieper moet zoeken dan alleen een grep.

[dolphs]

wiped all and unfortunately I get stuck yet at m4 it reports in the compile log:

 

<snip snip>

mv -f .deps/fd-safer-flag.Tpo .deps/fd-safer-flag.Po
gcc -std=gnu99  -I.   -isystem/u01/openpli/build-dm8000/tmp/sysroots/x86_64-linux/usr/include  -isystem/u01/openpli/build-dm8000/tmp/sysroots/x86_
64-linux/usr/include -march=native -O2 -pipe -MT freading.o -MD -MP -MF .deps/freading.Tpo -c -o freading.o freading.c
mv -f .deps/c-ctype.Tpo .deps/c-ctype.Po
In file included from clean-temp.h:22:0,
                 from clean-temp.c:23:
./stdio.h:143:1: error: 'gets' undeclared here (not in a function)
 _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
 ^
In file included from freadahead.h:18:0,
                 from freadahead.c:20:
./stdio.h:143:1: error: 'gets' undeclared here (not in a function)
 _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
 ^
mv -f .deps/c-stack.Tpo .deps/c-stack.Po
mv -f .deps/dup-safer-flag.Tpo .deps/dup-safer-flag.Po
make[3]: *** [freadahead.o] Error 1
make[3]: *** Waiting for unfinished jobs....
In file included from freading.h:18:0,
                 from freading.c:20:
./stdio.h:143:1: error: 'gets' undeclared here (not in a function)
 _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
 ^
make[3]: *** [freading.o] Error 1
mv -f .deps/fatal-signal.Tpo .deps/fatal-signal.Po
make[3]: *** [clean-temp.o] Error 1
mv -f .deps/execute.Tpo .deps/execute.Po
mv -f .deps/gl_avltree_oset.Tpo .deps/gl_avltree_oset.Po
make[3]: Leaving directory `/u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/m4-1.4.14/lib'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/m4-1.4.14/lib'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/u01/openpli/build-dm8000/tmp/work/x86_64-linux/m4-native-1.4.14-r0.1/m4-1.4.14'
make: *** [all] Error 2
+ die 'oe_runmake failed'
+ oefatal 'oe_runmake failed'
+ echo FATAL: 'oe_runmake failed'
FATAL: oe_runmake failed
+ exit 1

Edited by dolphs, 4 December 2013 - 18:31.