please look to the debug. I have confirmed that the second receiver is decoding channel, and that are not network problem because manually added stream from the second receiver is working.
SAT>IP Client for OpenPLi?
Re: SAT>IP Client for OpenPLi? #21
Re: SAT>IP Client for OpenPLi? #22
Posted 13 December 2014 - 09:53
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP Client for OpenPLi? #23
Re: SAT>IP Client for OpenPLi? #24
Posted 13 December 2014 - 15:13
I debug of the remote receiver I have something like that:
ok ... now we start!! STREAM service event 6 tuned.. PATready use pmtpid 03f0 for service_id 12c8 STREAM service event 5 start streaming... STREAM: have 1 video stream(s) (00a7), and 1 audio stream(s) (006c), and the pcr pid is 00a7, and the text pid is 01fc ADD PID: 0000 ADD PID: 0012 ADD PID: 0014 ADD PID: 006c ADD PID: 00a7 ADD PID: 01fc ADD PID: 03f0 setIoPrio realtime level 7 ok [eFilePushThreadRecorder] THREAD START [eDVBCAService] new service 1:0:1:12C8:2E7C:13E:820000:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:1:12C8:2E7C:13E:820000:0:0:0: [eDVBCIInterfaces] gotPMT broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode sdt update done! broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode broken startcode
Re: SAT>IP Client for OpenPLi? #25
Posted 13 December 2014 - 17:03
Try this on the local receiver:
wget -O /dev/null -Y off -S http://192.168.1.5:8001/1:0:1:12c7:2e7c:13e:820000:0:0:0
The header info is important and also whether actually data is received or not.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP Client for OpenPLi? #26
Re: SAT>IP Client for OpenPLi? #27
Re: SAT>IP Client for OpenPLi? #28
Posted 13 December 2014 - 19:01
Try this on the local receiver:
wget -O /dev/null -Y off -S http://192.168.1.5:8001/1:0:1:12c7:2e7c:13e:820000:0:0:0The header info is important and also whether actually data is received or not.
looks that is receiving:
wget -O /dev/null -Y off -S http://192.168.1.5:8001/1:0:1:12c7:2e 7c:13e:820000:0:0:0 --2014-12-13 18:58:55-- http://192.168.1.5:8001/1:0:1:12c7:2e7c:13e:820000:0:0: 0 Connecting to 192.168.1.5:8001... connected. HTTP request sent, awaiting response... HTTP/1.0 200 OK Connection: Close Content-Type: video/mpeg Server: streamserver Length: unspecified [video/mpeg] Saving to: '/dev/null' [ <=> ] 20,025,592 372KB/s
Re: SAT>IP Client for OpenPLi? #29
Posted 14 December 2014 - 08:47
8001/257:0:1 is not better ?
sorry ,mistake with REFTYPE:
That would help if the remote receiver isn't decrypting. But normally this isn't the case. Also some manufacturers' receivers can't do decrypting from the network (or can't skip the decrypting on the remote side), so I would not recommend using that mechanism.
Having said that, robert_cz, it may be you forgot to configure "descramble http streams" in the configuration of the remote receiver. Copying the file you received to your PC and trying to play it with e.g. VLC might be interesting.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP Client for OpenPLi? #30
Posted 22 December 2014 - 17:29
I have made more tests and I have more conclusions and informations.
First final I have found what to do to temporary have this functionality with not encrypted channels:
Is obligatory to start receiver with satellite cable connected and tuner enabled if not even recorded .ts files are not working :-(
Example from one of the records. I can see that system is reading from disk, but I do not have nothing on the screen.
loading streaminfo for /hdd/movie/20140616 2111 - Disney Junior Pl - Jej Wysokość Zosia.ts cuts file has 2 entries [@ML] m_streaminfo.getLastFrame returned 113928, 365119782 (4056s), fixup to: 113928, 46417 (0s) ok ... now we start!! eventNewProgramInfo 0 0 have 1 video stream(s) (1041), and 1 audio stream(s) (1039setIoPrio best-effort level 0 ok FILEPUSH THREAD START ), and the pcr pid is 1041, and the text pid is ffffffff decoder state: play, vpid=4161, apid=4153 DMX_SET_PES_FILTER(0x1039) - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux3 VIDEO_SET_STREAMTYPE 0 - ok DMX_SET_PES_FILTER(0x1041) - video - ok VIDEO_PLAY - ok VIDEO_CONTINUE - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok AUDIO_CONTINUE - ok disable teletext subtitles page ffffffffffffffff (und) eDVBServicePlay::seekTo: jump 0 seek. FILEPUSH waiting for pause FILEPUSH THREAD PAUSED AUDIO_CLEAR_BUFFER - failed (Invalid argument) VIDEO_CLEAR_BUFFER - failed (Invalid argument) ok, resolved skip (rel: 0, diff 0), now at 00000000 RemovePopup, id = ZapError resolved to PLAY eDVBServicePlay::unpause new service started! trying to download cuts! seekable.getLength() returns: [0, 128901232] RemovePopup, id = ZapError VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) eDVBChannel: pvrEvent evtStopped PATready use pmtpid 0020 for service_id 2938 [Dish] tuning failed VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) eventNewProgramInfo 0 0 have 1 video stream(s) (1041), and 2 audio stream(s) (1039, 1040), and the pcr pid is 1041, and the text pid is ffffffff decoder state: play, vpid=4161, apid=4153 VIDEO_CONTINUE - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok AUDIO_CONTINUE - ok VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) Timeout! VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) eDVBServicePlay::seekTo: jump 42882822 seek. FILEPUSH waiting for pause FILEPUSH THREAD PAUSED AUDIO_CLEAR_BUFFER - failed (Invalid argument) VIDEO_CLEAR_BUFFER - failed (Invalid argument) ok, resolved skip (rel: 0, diff 42882822), now at 0928eab0 eDVBChannel: pvrEvent evtStopped VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument) VIDEO_GET_PTS failed(Invalid argument)
The same I have with the remote receiver, when I start with tuner enabled, and cable connected I need only to change tuner to "not configured" and everything is working until reload receiver.
Can you confirm if you have the same with your receivers?
Re: SAT>IP Client for OpenPLi? #31
Posted 23 December 2014 - 18:05
I don't understand? Remote fallback tuner vs. recordings?
Please note that not all receivers can record from a http source (be it a remote channel or a fallback tuner). See http://openpli.org/wiki/comparison.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP Client for OpenPLi? #32
Posted 23 December 2014 - 23:01
I don't understand? Remote fallback tuner vs. recordings?
Please note that not all receivers can record from a http source (be it a remote channel or a fallback tuner). See http://openpli.org/wiki/comparison.
recording, .ts file, was only example of other think that have the same symptoms like remote fallback tuner.
That not working for me.
Re: SAT>IP Client for OpenPLi? #33
Posted 24 December 2014 - 18:54
So if I understand you correcty, the problem is like this: You want to play a recording (file.ts) and it only works if the receiver has a satellite tuner connected and enabled. I can't explain that. I've done this so many times. Did you synchronise the lamed (althought that shouldn't even be necessary for this to work). Never pull or insert a satellite cable if the receiver is on, it can damage your tuner!
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP Client for OpenPLi? #34
Posted 29 December 2014 - 19:16
So if I understand you correcty, the problem is like this: You want to play a recording (file.ts) and it only works if the receiver has a satellite tuner connected and enabled. I can't explain that. I've done this so many times. Did you synchronise the lamed (althought that shouldn't even be necessary for this to work). Never pull or insert a satellite cable if the receiver is on, it can damage your tuner!
Have you check in your if you have the same, that *.ts files ar not working with disabled satelite tuner?
Re: SAT>IP Client for OpenPLi? #35
Posted 29 December 2014 - 19:18
I will try it right now, please hold on.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP Client for OpenPLi? #36
Posted 29 December 2014 - 19:24
Yes, playing right now. Setup: VU+ Duo2 with three tuners, all of them disabled ("not configured"), tested with live reception from remote fallback tuner, check - works, went to the recordings directory selected several recordings and they're just playing.
Do you have a common/same lamedb between all receivers, what I recommend?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP Client for OpenPLi? #37
Posted 30 December 2014 - 14:03
Yes, playing right now. Setup: VU+ Duo2 with three tuners, all of them disabled ("not configured"), tested with live reception from remote fallback tuner, check - works, went to the recordings directory selected several recordings and they're just playing.
Do you have a common/same lamedb between all receivers, what I recommend?
yes I have the same lamedb. Last one doubt, after switching off tuners have you make hard reset?
My receiver is ADB5800xx, and distribution is http://nbox.xunil.pl...aterlia_Project, project page do not have english version :-( is based on Openpli.
Possibly is problem with specific hardware.
Re: SAT>IP Client for OpenPLi? #38
Re: SAT>IP Client for OpenPLi? #39
Posted 30 December 2014 - 15:48
I doubt whether it is relly based on OpenPLi. It is not even MIPSEL.
I suggest that only the image name is based on OpenPLi, not much else.
Yes is based on the source code of OpenPLi, actuality on the source code from 2014-10-31, you can find all distribution history (on Polish :-)) here http://nbox.xunil.pl...ia_aktualizacji
Is based not on MIPSEL, but on SH4.
Can you, please, check if *.ts files are working with switched off tuner and after the hard reboot?
I need this confirmation, because looks that for some reason on my receiver when I'm trying to open *.ts file receiver is using tuner for demux and Video play:
Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux3
Edited by robert_cz, 30 December 2014 - 15:49.
Re: SAT>IP Client for OpenPLi? #40
Posted 30 December 2014 - 15:55
There is nothing in OpenPLI that is MIPSEL specific, so porting it to other architectures should not be a big issue for someone with a bit of experience. It even runs on x86.
Problem is usually the DVB API which is absent or not compatible, which can only be fixed in the drivers(which might be the issue here as well).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
8 user(s) are reading this topic
0 members, 8 guests, 0 anonymous users