26 replies to this topic

[mr2driver]

Hab ein Problem seit längerer Zeit. Bei meiner VU+ Solo2 hab ich als Ausgabe 1080p gewählt. Im Autoresolution-Menü hab ich 1080p24 auch als 1080p24 eingestellt. Wenn ich nun im Mediaplayer eine MKV starte wird diese trotzdem mit 50Hz abgespielt und ruckelt. Wenn ich allerdings vorher auf z.B. Das Erste HD (720p) umschalte und dann die MKV abspiele schaltet Autoresolution auf 1080p24 und der Film läuft ruckelfrei.

 

Nun meine Frage: Warum schaltet Autoresolution erst auf 24Hz wenn ich auf einem 720p Sender bin?

 

 

[Trial]

Hi,
Was passiert wenn Du 1080i wählst? AR wurde entwickelt als es noch keine Box mit 1080p Ausgabe gab. Ich habe mir mein eigenes AR geschrieben da könnte ich es auch mal checken.

Ciao

Edited by Trial, 23 December 2013 - 21:13.

[jever]

ich habe den gleichen Effekt

starten eines 1080p24 mkv - keine Umschaltung auf 24p

dann in der Filmliste ein 720p24 mkv anwählen - jetzt wird auf 24p umgeschaltet (Einstellung auf 1080p24 in AR)

nun wieder das ursprüngl. File anwählen - es bleibt nun auf 24p

das alles ohne in TV Betrieb zurückzuwechseln, natürlich

Edited by jever, 24 December 2013 - 11:27.

[littlesat]

Wenn das erst gut wahr dan liegt es warscheinlich an den neuen vu treiber.

[mr2driver]

Bei 1080i geht es auch nicht. Momentan schalte ich immer auf Das Erste HD um und dann starte den Mediaplayer.

 

@Trial: Geht es mit deinem AR?

[Trial]

Hi,

welches PLi setzt Du ein? Das aktuellste 4er?

 

ciao

[mr2driver]

Ja das 4er.

[jever]

bei mir auch immer aktuelles 4.0

wenn ich Zeit hab, mach ich mal nen Neuflash

kann ja nicht sein, dass wir die Einzigen sind

[mr2driver]

Neuflash hab ich schon gemacht vor paar Tagen. Bringt nichts.

[Trial]

Hi,

stimmt. Oft wurde nicht auf p24 gestellt. Das liegt aber weder an den Treibern noch am Plugin. Das Problem liegt tiefer im System. Wenn ihr bei der Wiedergabe von externen Dateien (Download, Ripps, Stream) auf die Informationen zur Auflösung achtet dann solltet ihr bemerken das manchmal die Informationen lückenhaft sind. Es fehlen dann Frequenz oder Interlaced-Flag. Diese fehlenden Informationen sorgen dafür das AR nicht sauber arbeiten kann.

 

Du kannst es ja mal kontrollieren. Spiel den 24p Film mal ab und wenn er entweder richtig oder falsch abgespielt werde wähle mal Menü, Information, Kanal. Wenn er richtig spielt sollten da vernünftige Werte stehen und wenn nicht gar keine oder falsche Werte.

 

In "meinem" AR mache ich es etwas anders und bin vielleicht etwas auf eine VU fixiert.

 

Ich frage erst ganz normal E2 nach Höhe, Breite, Framerate aber wenn /proc/stb/vmpeg/0/yres(/xres oder /framerate) existiert gebe ich diesen Werten Vorrang. Ich habe festgestellt das diese Informationen zuverlässiger kommen.

 

Weiter habe ich noch andere Sachen geändert die mich persönlich gestört haben. Film in z.B. 720x400p30 wird in 480p und 720x400p25 in 576p ausgegeben. Vorher wurde immer 480p genommen. Wenn es zu kleine Auflösungen sind nehme ich nicht die nächstliegende Auflösung sondern gehe gleich auf Standard bzw. 1080 damit nicht doppelt skaliert werden muss. Also 320x200 wird immer gleich auf 1080 gepumpt nicht das erst die Box auf 480/576 skalliert und der TV dann auf 1080.

 

Schaus dir mal an obs bei dir auch geht und Fehler dann hier weil ich die Änderungen verzappft habe und kein Anderer daran schuld ist.

 

Diese Änderungen sind nach wochenlanger Diskussion um doppelte Skalierung und berücksichtigung der Frequenz bei der Skalierung mit einem Dev entstanden:-)

 

edit: Ach ja es gibt z.Z. nur eine p24 Einstellung da entweder meine Box oder mein TV kein 480p24/576p24 oder 720p24 mag.

 

ciao

Attached Files

•  enigma2-plugin-systemplugins-autoresolution_experimental-rb_vusolo2.ipk   16.97KB   10 downloads

Edited by Trial, 26 December 2013 - 11:14.

[Trial]

@littlesat,

das Problem könnte in servicemp3.cpp liegen da daher wohl die Informationen wie info.getInfo(iServiceInformation.sVideoWidth) stammen wenn ich nicht irre.

 

ciao

[littlesat]

Dann habe ich die idee dass die VU treiber nicht immer richtig wieterleiten wenn etwas an den parameter aendert.

[mr2driver]

Danke. Läuft. Aber ein Problem gibt es mit deinem AR. Wenn ich den Mediaplayer beende schaltet er z.B. alle 1080i Sender auf 60 Hz um. Vor der 24p Wiedergabe sind es 50 Hz. 

 

Hab im AR 720p und 1080i auf 50Hz gestellt. Trotzdem schaltet der auf 60Hz um nach 24p Wiedergabe.

[Trial]

@littlesat,

ich habe leider nur VU ich kann also nicht sagen ob Andere es besser machen. Ich weiß nur das bei vielen Filmen, die nicht aus dem TV stammen, die Info z.B. in PLiExtraInfo nicht stimmen. Gut kann ich es sehen wenn ich einige Streams von IPTVListUpdater durchzappe. Oft fehlt progressiv-Flag und auch nicht selten ist eine Frequenz von 0. Man erkennt es dann im Player wenn da sowas wie 320x24025 oder 320x2400 und Ähnliches steht.

 

@mrdriver,

wie hast Du HD interlaced und HD progressive eingestellt? Kannst Du mal loggen was passiert. Loggen geht mit Telnet einfach: init 4 um E2 zu stoppen, E2 mit enigma2 wieder starten, zappen und Filme abspielen (am Besten Kreuz und Quer und zwar so das der Fehler wieder dabei ist) und die Ausgabe hier mal anhängen. Mit CTRL+C kannst Du das abbrechen und mit init 3 wieder alles normal laufen lassen.

 

ciao

[mr2driver]

Schaue heute Abend mal. Muß jetzt weg. Danke.

[mr2driver]

So hatte doch jetzt zeit. Log:

 

Trying 192.168.178.28...

Connected to vusolo2.fritz.box.

Escape character is '^]'.

 

openpli 4 vusolo2

 

 

vusolo2 login: root

root@vusolo2:~# init 4

root@vusolo2:~# enigma2

PYTHONPATH: /usr/lib/enigma2/python

+ (1) Background File Eraser

+ (5) Tuxtxt

+ (8) graphics acceleration manager

+ (9) GFBDC

12150k video mem

setting /dev/tty0 status failed.

 - double buffering available!

4050kB available for acceleration surfaces.

resolution: 1280 x 720 x 32 (stride: 5760)

+ (9) gLCDDC

found OLED display!

lcd buffer 0x80cdf8 8448 bytes, stride 132

LCD resolution: 132 x 64 x 8 (stride: 132)

+ (9) Font Render Class

[FONT] initializing lib...

[FONT] loading fonts...

[FONT] Intializing font cache, using max. 4MB...

+ (10) gRC

RC thread created successfully

+ (15) eWindowStyleManager

+ (20) DVB-CI UI

+ (20) UHF Modulator

couldnt open /dev/rfmod0!!!!

+ (20) RC Input layer

+ (20) misc options

+ (20) AVSwitch Driver

couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!

+ (21) input device driver

Input device "dreambox advanced remote control (native)" is a remotecontrol

Found 1 input devices.

+ (22) Hdmi CEC driver

+ (30) eActionMap

+ (35) CI Slots

scanning for common interfaces..

CI Slot 0 setSource(0)

eDVBCIInterfaces->setInputSource(0, 0)

eDVBCIInterfaces->setInputSource(1, 1)

done, found 1 common interface slots

+ (35) CA handler

+ (36) Stream server

+ (40) eServiceCenter

settings instance.

+ (41) eServiceFactoryDVD

+ (41) eServiceFactoryM2TS

+ (41) eServiceFactoryMP3

+ (41) eServiceFactoryFS

+ (41) eServiceFactoryDVB

reached rl 70

---- opening lame channel db

reading services (version 4)

loaded 105 channels/transponders and 1625 services

scanning for frontends..

opening frontend 0

close frontend 0

opening frontend 1

close frontend 1

found 1 adapter, 2 frontends(2 sim) and 9 demux, boxtype 4

Use valid Linux Time (RTC?)

[EPGC] Initialized EPGCache (wait for setCacheFile call now)

Loading spinners...

[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait5.png

found 4 spinner!

 

executing main

setIoPrio best-effort level 3 ok

Failed to open /dev/dbox/fp0

[Harddisk] enumerating block devices...

new Harddisk sda -> /dev/sda -> /dev/sda

[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')

Reading satellites.xml

removing internal link on frontend id 0

sec config cleared

setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes

setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes

link tuner 0 to tuner 1

slot: 0 configmode: loopthrough

slot: 1 configmode: simple

diseqcmode:  single

sec config completed

loading bouquet... /etc/enigma2/bouquets.tv 1

loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1

14 entries in Bouquet userbouquet.favourites.tv

loading bouquet... /etc/enigma2/userbouquet.sky_hd__tv_.tv 15

15 entries in Bouquet userbouquet.sky_hd__tv_.tv

loading bouquet... /etc/enigma2/userbouquet.sky_sport_hd__tv_.tv 30

14 entries in Bouquet userbouquet.sky_sport_hd__tv_.tv

loading bouquet... /etc/enigma2/userbouquet.sky_bundesliga_hd__tv_.tv 44

10 entries in Bouquet userbouquet.sky_bundesliga_hd__tv_.tv

4 entries in Bouquet bouquets.tv

loading bouquet... /etc/enigma2/bouquets.radio 1

loading bouquet... /etc/enigma2/userbouquet.favourites.radio 1

0 entries in Bouquet userbouquet.favourites.radio

1 entries in Bouquet bouquets.radio

main thread is non-idle! display spinner!

[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)

[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)

[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)

[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)

[FONT] adding font /usr/share/enigma2/Ai.HD/fonts/hd.ttf...OK (Regular)

[FONT] adding font /usr/share/enigma2/Ai.HD/fonts/goodtime.ttf...OK (Crs)

[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)

[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)

[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)

libpng warning: iCCP: known incorrect sRGB profile

[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)

Activating keymap: Default (US)

[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap

Activating language Deutsch

cannot open /proc/stb/avs/0/input_choices

--> setting scaler_sharpness to: 0000000D

couldn't open /proc/stb/misc/12V_output

[ePopen] command: ip -o addr show dev eth0

setLCDBrightness 25

setLCDBrightness 127

FIXME: request for unknown slot

FIXME: request for unknown slot

FIXME: request for unknown slot

Plugin  Extensions/WebInterface failed to load: No module named plugin

Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface

getModeList for port DVI-PC

remove DVI-PC because of not existing modes

getModeList for port YPbPr

getModeList for port Scart

getModeList for port DVI

hotplug on dvi

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto

setMode - port: DVI mode: 1080p rate: 50Hz

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto

starting hotplug handler

[SKIN] Parsing embedded skin <embedded-in-'ResolutionLabel'>

port changed to DVI

mode changed to 1080p

getModeList for port DVI

default ('1080p', 'Standard')

preferedmodes ['720p', '1080i', '576p', '480p', '576i', '480i', ('1080p', 'Standard')]

[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'

[EPGC] time updated.. start EPG Mainloop

[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>

[Skin] SKIN ERROR in SecondInfoBar: No module named ExtendedServiceInfo

valign must be either top, center or bottom!

warning, skin is missing element From in <class 'Screens.Dish.Dish'>

warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>

warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>

warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>

warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>

warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>

warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>

RemovePopup, id = ZapError

[Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Ai.HD/skin.xml}: source 'HbbtvApplication' was not found in screen 'InfoBar'!. Please contact the skin's author!

[EPGC] 17415 events read from /hdd/epg.dat

setValue 80

Setvolume: 100 100 (raw)

Setvolume: 0 0 (-1db)

Setvolume: 80 80 (raw)

Setvolume: 13 13 (-1db)

playing 1:0:19:EF10:421:1:C00000:0:0:0:

not pauseable.

not pauseable.

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

allocate channel.. 0421:0001

opening frontend 1

(1)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 1 Freq 10832250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0

tuning to 1082 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:EF10:421:1:C00000:0:0:0:

allocate demux

child has terminated

pipes closed

child has terminated

pipes closed

[ePopen] command: route -n | grep  eth0

poll: unhandled POLLERR/HUP/NVAL for fd 29(17)

child has terminated

pipes closed

poll: unhandled POLLERR/HUP/NVAL for fd 34(17)

poll: unhandled POLLERR/HUP/NVAL for fd 36(16)

[SEC] set static current limiting

[SEC] invalidate current switch params

[SEC] setVoltage 2

[SEC] sleep 10ms

set sequence pos 3

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 1

(1)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

child has terminated

pipes closed

0.0.0.0

192.168

nameservers: [[192, 168, 178, 1]]

read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}

self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 28], 'up': True, 'mac': '00:1d:ec:05:29:a3', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}

AT plugin not found

ER plugin not found

[OpenWebif] loading external plugins...

[OpenWebif] no plugins to load

[OpenWebif] started on 80

[OpenWebif] started on 443

poll: unhandled POLLERR/HUP/NVAL for fd 29(16)

(1)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x12af118 running

[eEPGCache] channel 0x12af118 running

[EPGC] next update in 2 sec

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020

allocate demux

TuxTxt cache cleared

decoder state: play, vpid=255, apid=259

DMX_SET_PES_FILTER(0xff) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x103) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0xff) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x20) - ttx - ok

DEMUX_START - ttx - ok

TuxTxt cache cleared

TuxTxt: initialized

TuxTxt service started 20

VIDEO_SLOWMOTION(0) - TuxTxt running thread...(020)

ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

AUDIO_CHANNEL_SELECT(0) - ok

disable teletext subtitles

not pauseable.

not pauseable.

[AutoRes] service changed

[eDVBCAService] new service 1:0:19:EF10:421:1:C00000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF10:421:1:C00000:0:0:0:

RemovePopup, id = ZapError

PATready

use pmtpid 0060 for service_id ef10

[SEC] set dynamic current limiting

eventNewProgramInfo 0 0

have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020

decoder state: play, vpid=255, apid=259

[eDVBCIInterfaces] gotPMT

[Dish] tuning failed

sdt update done!

AITready

[eDVBLocalTimerHandler] diff is 0

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

[AutoRes] determineContent

[AutoRes] switch deinterlacer mode to auto

[AutoRes] new content is 0x0i50 mode is hd_i

[AutoRes] determined videomode 1080p

[EPGC] start caching events(1388064974)

action ->  InfobarChannelSelection switchChannelDown

False

False

False

False

action ->  OkCancelActions ok

playing 1:0:19:283E:3FB:1:C00000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF10:421:1:C00000:0:0:0:

[eDVBCAService] free service 1:0:19:EF10:421:1:C00000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

TuxTxt stopped service 20

cleaning up

TuxTxt cache cleared

start release channel timer

not pauseable.

not pauseable.

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x12af118

[eEPGCache] remove channel 0x12af118

[EPGC] abort caching events !!

allocate channel.. 03fb:0001

(1)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0

tuning to 1743 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:283E:3FB:1:C00000:0:0:0:

allocate demux

[SEC] set static current limiting

[SEC] invalidate current switch params

set sequence pos 3

set sequence pos 3

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 1

(1)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

(1)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x12af118 running

[eEPGCache] channel 0x12af118 running

stop release channel timer

ok ... now we start!!

[EPGC] next update in 2 sec

eventNewProgramInfo 0 0

have 1 video stream(s) (13f7), and 1 audio stream(s) (13f8), and the pcr pid is 13f7, and the text pid is 13fa

allocate demux

TuxTxt cache cleared

decoder state: play, vpid=5111, apid=5112

DMX_SET_PES_FILTER(0x13f7) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x13f8) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(1) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0x13f7) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x13fa) - ttx - ok

DEMUX_START - ttx - ok

TuxTxt cache cleared

TuxTxt: initialized

TuxTxt service started 13fa

TuxTxt running thread...(13fa)

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles

not pauseable.

not pauseable.

[AutoRes] service changed

[eDVBCAService] new service 1:0:19:283E:3FB:1:C00000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:19:283E:3FB:1:C00000:0:0:0:

RemovePopup, id = ZapError

PATready

use pmtpid 13f6 for service_id 283e

[SEC] set dynamic current limiting

eventNewProgramInfo 0 0

dvb subtitle  PID 13fb with wrong subtitling type (24)... force 0x10!!

dvb subtitle  PID 13fe with wrong subtitling type (24)... force 0x10!!

have 1 video stream(s) (13f7), and 4 audio stream(s) (13f8, 13f9, 13fc, 13fd), and the pcr pid is 13f7, and the text pid is 13fa

decoder state: play, vpid=5111, apid=5112

dvb subtitle  PID 13fb with wrong subtitling type (24)... force 0x10!!

dvb subtitle  PID 13fe with wrong subtitling type (24)... force 0x10!!

[eDVBCIInterfaces] gotPMT

[Dish] tuning failed

AITready

VIDEO_GET_EVENT - ok

[AutoRes] got event evVideoSizeChanged

VIDEO_GET_EVENT - ok

[AutoRes] got event evFramerateChanged

VIDEO_GET_EVENT - ok

[AutoRes] got event evVideoProgressiveChanged

sdt update done!

[AutoRes] determineContent

[AutoRes] switch deinterlacer mode to auto

[AutoRes] new content is 1280x720p50 mode is p720_50

[AutoRes] determined videomode 1080p

[eDVBLocalTimerHandler] diff is 3

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] update RTC

[eDVBLocalTimerHandler] time update to 14:36:25

[eDVBLocalTimerHandler] m_time_difference is 3

[eDVBLocalTimerHandler] set Linux Time

[EPGC] start caching events(1388064985)

eHdmiCEC: received message 

playing 1:0:19:EF10:421:1:C00000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:283E:3FB:1:C00000:0:0:0:

[eDVBCAService] free service 1:0:19:283E:3FB:1:C00000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

TuxTxt stopped service 13fa

cleaning up

TuxTxt cache cleared

start release channel timer

not pauseable.

not pauseable.

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x12af118

[eEPGCache] remove channel 0x12af118

[EPGC] abort caching events !!

allocate channel.. 0421:0001

(1)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 1 Freq 10832250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0

tuning to 1082 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:EF10:421:1:C00000:0:0:0:

allocate demux

[SEC] set static current limiting

[SEC] invalidate current switch params

set sequence pos 3

set sequence pos 3

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 1

(1)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

(1)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x183b3d8 running

[eEPGCache] channel 0x183b3d8 running

[EPGC] next update in 2 sec

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020

allocate demux

TuxTxt cache cleared

decoder state: play, vpid=255, apid=259

DMX_SET_PES_FILTER(0xff) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x103) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0xff) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x20) - ttx - ok

DEMUX_START - ttx - ok

TuxTxt cache cleared

TuxTxt: initialized

TuxTxt service started 20

VIDEO_SLOWMOTION(0) - TuxTxt running thread...(020)

ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles

not pauseable.

not pauseable.

[AutoRes] service changed

[eDVBCAService] new service 1:0:19:EF10:421:1:C00000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF10:421:1:C00000:0:0:0:

RemovePopup, id = ZapError

PATready

use pmtpid 0060 for service_id ef10

[SEC] set dynamic current limiting

eventNewProgramInfo 0 0

have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020

decoder state: play, vpid=255, apid=259

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

[Dish] tuning failed

AITready

[AutoRes] determineContent

[AutoRes] switch deinterlacer mode to auto

[AutoRes] new content is 0x0p50 mode is p1080_50

[AutoRes] determined videomode 1080p

VIDEO_GET_EVENT - ok

[AutoRes] got event evVideoSizeChanged

VIDEO_GET_EVENT - ok

[AutoRes] got event evFramerateChanged

VIDEO_GET_EVENT - ok

[AutoRes] got event evVideoProgressiveChanged

[AutoRes] determineContent

[AutoRes] switch deinterlacer mode to auto

[AutoRes] new content is 1920x1080i25 mode is hd_i

[AutoRes] determined videomode 1080p

sdt update done!

[EPGC] start caching events(1388064994)

[eDVBLocalTimerHandler] diff is -3

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] update RTC

[eDVBLocalTimerHandler] time update to 14:36:32

[eDVBLocalTimerHandler] m_time_difference is -3

[eDVBLocalTimerHandler] set Linux Time

action ->  InfobarMenuActions mainMenu

loading mainmenu XML...

TimerEdit TimerEditList

PluginBrowser PluginBrowser

action ->  OkCancelActions ok

okbuttonClick

[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF10:421:1:C00000:0:0:0:

[eDVBCAService] free service 1:0:19:EF10:421:1:C00000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

TuxTxt stopped service 20

cleaning up

TuxTxt cache cleared

start release channel timer

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile

set seek position: 0

set instance.

warning, skin is missing element PositionGauge in <class 'Plugins.Extensions.MediaPlayer.plugin.MediaPlayer'>

warning, skin is missing element repeat in <class 'Plugins.Extensions.MediaPlayer.plugin.MediaPlayer'>

warning, skin is missing element currenttext in <class 'Plugins.Extensions.MediaPlayer.plugin.MediaPlayer'>

warning, skin is missing element titletext in <class 'Plugins.Extensions.MediaPlayer.plugin.MediaPlayer'>

[SKIN] Parsing embedded skin <embedded-in-'MediaPlayerLCDScreen'>

[Skin] Attribute not implemented: id value: 1

setPixmapNum(0) failed! defined pixmaps: []

[Picload] setPara max-X=116 max-Y=116 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000

action ->  DirectionActions down

action ->  DirectionActions downUp

action ->  DirectionActions up

action ->  DirectionActions upUp

action ->  OkCancelActions ok

[DVBCAHandler] no more services

action ->  DirectionActions down

action ->  DirectionActions downUp

action ->  DirectionActions down

action ->  DirectionActions downUp

[EPGC] abort non avail schedule other reading

[EPGC] abort non avail netmed schedule reading

[EPGC] abort non avail netmed schedule other reading

[EPGC] abort non avail FreeSat schedule_other reading

[EPGC] abort non avail viasat reading

action ->  OkCancelActions ok

[EPGC] nownext finished(1388064998)

release cached channel (timer timeout)

[eDVBLocalTimerHandler] remove channel 0x183b3d8

[eEPGCache] remove channel 0x183b3d8

[EPGC] abort caching events !!

stop release channel timer

action ->  DirectionActions down

action ->  DirectionActions downUp

action ->  DirectionActions down

action ->  DirectionActions downUp

action ->  DirectionActions down

action ->  DirectionActions downUp

action ->  OkCancelActions ok

playing 4097:0:0:0:0:0:0:0:0:0:/media/hdd/mkv/Hard Candy.mkv

eServiceMP3::construct!

eServiceMP3::playbin uri=file:///media/hdd/mkv/Hard%20Candy.mkv

eServiceMP3::starting pipeline

gst_element_query_position failed in getPlayPosition

new service started! trying to download cuts!

download failed, no cuesheet interface

resolved to PLAY

gst_element_query_position failed in getPlayPosition

gst_element_query_position failed in getPlayPosition

gst_element_query_position failed in getPlayPosition

gst_element_query_position failed in getPlayPosition

gst_element_query_position failed in getPlayPosition

resolved to PLAY

gst_element_query_position failed in getPlayPosition

eServiceMP3::state transition NULL -> READY

[AutoRes] service changed

[__evUpdatedInfo] title 0 of 0 ()

[__evUpdatedInfo] title 0 of 0 ()

[__evUpdatedInfo] title 0 of 0 ()

[__evUpdatedInfo] title 0 of 0 (HARD_CANDY.Title1)

[__evUpdatedInfo] title 0 of 0 (HARD_CANDY.Title1)

eServiceMP3::state transition READY -> PAUSED

eServiceMP3::subsink properties set!

eServiceMP3::async-done - 1 video, 1 audio, 1 subtitle

AUDIO STRUCT=audio/x-dts

eServiceMP3::audio stream=0 codec=DTS audio language=de

eServiceMP3::subtitle stream=0 language=de codec=(null)

getSubtitleType::subtitle probe caps type=subpicture/x-pgs

eServiceMP3::switched to subtitle stream 0

[__evUpdatedInfo] title 0 of 0 (HARD_CANDY.Title1)

[AutoRes] got event evFramerateChanged

[AutoRes] got event evVideoProgressiveChanged

eServiceMP3::state transition PAUSED -> PLAYING

[AutoRes] determineContent

[AutoRes] switch deinterlacer mode to auto

[AutoRes] new content is 1920x1080p24 mode is 24p

[AutoRes] determined videomode 1080p24

[AutoRes] switching to 1080p24

close frontend 1

action ->  OkCancelActions cancel

action ->  MsgBoxActions ok

setPixmapNum(0) failed! defined pixmaps: []

playing 1:0:19:EF10:421:1:C00000:0:0:0:

eServiceMP3::stop /media/hdd/mkv/Hard Candy.mkv

getBouquet failed.. no path given!

eServiceMP3::destruct!

not pauseable.

not pauseable.

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

allocate channel.. 0421:0001

opening frontend 1

(1)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 1 Freq 10832250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0

tuning to 1082 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:EF10:421:1:C00000:0:0:0:

allocate demux

[SEC] set static current limiting

[SEC] invalidate current switch params

[SEC] setVoltage 2

[SEC] sleep 10ms

set sequence pos 3

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 1

(1)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

(1)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x182ec58 running

[eEPGCache] channel 0x182ec58 running

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020

allocate demux

[EPGC] next update in 2 sec

TuxTxt cache cleared

decoder state: play, vpid=255, apid=259

DMX_SET_PES_FILTER(0xff) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x103) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0xff) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x20) - ttx - ok

DEMUX_START - ttx - ok

TuxTxt cache cleared

TuxTxt: initialized

TuxTxt service started 20

TuxTxt running thread...(020)

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles

not pauseable.

not pauseable.

[AutoRes] service changed

[eDVBCAService] new service 1:0:19:EF10:421:1:C00000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF10:421:1:C00000:0:0:0:

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] diff is -1

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] update RTC

[eDVBLocalTimerHandler] time update to 14:36:47

[eDVBLocalTimerHandler] m_time_difference is -1

[eDVBLocalTimerHandler] set Linux Time

PATready

use pmtpid 0060 for service_id ef10

[SEC] set dynamic current limiting

eventNewProgramInfo 0 0

have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020

decoder state: play, vpid=255, apid=259

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

[Dish] tuning failed

[AutoRes] determineContent

[AutoRes] switch deinterlacer mode to auto

[AutoRes] new content is 0x0p50 mode is p1080_50

[AutoRes] determined videomode 1080p

[AutoRes] switching to 1080p

sdt update done!

AITready

[EPGC] start caching events(1388065008)

VIDEO_GET_EVENT - ok

[AutoRes] got event evFramerateChanged

VIDEO_GET_EVENT - ok

[AutoRes] got event evVideoProgressiveChanged

[AutoRes] determineContent

[AutoRes] switch deinterlacer mode to auto

[AutoRes] new content is 1920x1080i25 mode is hd_i

[AutoRes] determined videomode 1080p

action ->  OkCancelActions cancel

eHdmiCEC: received message 

TuxTxt <Biterror in Packet>

[EPGC] abort non avail schedule other reading

[EPGC] abort non avail netmed schedule reading

[EPGC] abort non avail netmed schedule other reading

[EPGC] abort non avail FreeSat schedule_other reading

[EPGC] abort non avail viasat reading

[EPGC] nownext finished(1388065015)

[EPGC] schedule finished(1388065018)

[EPGC] stop caching events(1388065018)

[EPGC] next update in 60 min

^CconnectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.

]

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF10:421:1:C00000:0:0:0:

[eDVBCAService] free service 1:0:19:EF10:421:1:C00000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

TuxTxt stopped service 20

cleaning up

TuxTxt cache cleared

start release channel timer

---- saving lame channel db

saved 105 channels and 1625 services!

release cached channel (timer timeout)

[eDVBLocalTimerHandler] remove channel 0x182ec58

[eEPGCache] remove channel 0x182ec58

stop release channel timer

[EPGC] store epg to realpath '/media/hdd/epg.dat'

[EPGC] 17379 events written to /hdd/epg.dat

thread joined 0

set RTC to previous valid time

close frontend 1

- (41) eServiceFactoryDVD

- (41) eServiceFactoryM2TS

- (41) eServiceFactoryMP3

- (41) eServiceFactoryFS

- (41) eServiceFactoryDVB

- (40) eServiceCenter

- (36) Stream server

- (35) CI Slots

- (35) CA handler

- (30) eActionMap

- (22) Hdmi CEC driver

- (21) input device driver

- (20) DVB-CI UI

- (20) UHF Modulator

- (20) RC Input layer

- (20) misc options

- (20) AVSwitch Driver

- (15) eWindowStyleManager

- (10) gRC

waiting for gRC thread shutdown

gRC thread has finished

- (9) GFBDC

setting /dev/tty0 status failed.

- (9) gLCDDC

- (9) Font Render Class

- (8) graphics acceleration manager

- (5) Tuxtxt

- (1) Background File Eraser

reached rl -1

root@vusolo2:~# 

[mr2driver]

Nach dem Beenden von 24p Wiedergabe werden die normalen Sender wie z.B. RTL HD, Sky HD und ZDF HD mit 60 Hz ausgegeben statt mit 50Hz. Einstellung siehe Screenshot.

Attached Files

•  1_0_19_EF10_421_1_C00000_0_0_0.jpg   83.11KB   33 downloads
•  1_0_19_EF10_421_1_C00000_0_0_0-2.jpg   75.72KB   26 downloads

Edited by mr2driver, 26 December 2013 - 14:45.

[Trial]

Hi,

stell mal HD interlace auf den gewünschten Modus. Es kann sein das ich nicht alle Optionen unterstütze. Ich hatte vor ca. 2 Monaten damit angefangen aber es nicht ganz zu Ende gemacht. Ich habe mir jetzt mal ein paar Solo2s ins Zimmer gestellt und kann dann mal suchen was es ist.

 

Auch wenn es viele Leute behaupten sind nicht alle Deutschen fleisig:-)

 

Ralf

[mr2driver]

Also wenn ich HD Interlace auf 1080i einstelle (da 1080p nicht verfügbar) dann wird z.B. MGM HD als 1080i 50Hz ausgegeben. Wenn dann aber auf ZDF HD schalte da wird wieder 1080p 60Hz wiedergegeben. Egal was man einstellt, nachdem umschalten von einer anderen Auflösung auf 1080p zurück wird immer 60Hz eingestellt.

 

Werde das normale AR benutzen und halt immer auf einen 720p Sender schalten bevor MKV starte. Ist einfacher

Edited by mr2driver, 26 December 2013 - 17:22.

[Trial]

Hi,

ich schau demnächst nochmal rein.

 

ciao