I Have a vu plus duo 2 and the wma files asf work fine ..I wondered if in the future this could be working in the dream 8000 ..thanks !
wma / asf
Started by jase41, 24 Dec 2013 12:18
29 replies to this topic
Re: wma / asf #2
-
- PLi® Core member
- 57,163 posts
+698
Excellent
Posted 24 December 2013 - 12:35
On DM8000 never....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: wma / asf #3
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 24 December 2013 - 13:22
It won't happen either because CPU doesn't support or because DMM is not adding new features on DM8000.
Anyway it's up to manufacture to release (closed) drivers with more media support...
PS. Regarding Duo2 most probably you are not using OpenPLi right? Because we are trying hardly to enable WMA/WMV on OpenPLi...
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: wma / asf #4
-
- Member
- 24 posts
+1
Neutral
Posted 24 December 2013 - 15:20
Unfortuanatly im not using pli ..but I wish I was as its the best ..but I look forward to future regards ...
Re: wma / asf #5
-
- PLi® Core member
- 70,501 posts
+1,810
Excellent
Posted 24 December 2013 - 19:12
It will not work with any image. Afaik DMM doesn't have a license for it, so it's not enabled in the drivers.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: wma / asf #6
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 24 December 2013 - 19:18
(it is already working for dm800se/dm500hd/dm7020hd and v2 of them)
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: wma / asf #7
-
- Member
- 24 posts
+1
Neutral
Posted 25 December 2013 - 06:52
oh cool ...I may treat myself to the 7020hd v2 then thanks guys and merry Christmas to you ....all
Re: wma / asf #8
-
- PLi® Core member
- 57,163 posts
+698
Excellent
Posted 25 December 2013 - 08:41
Yep... But those other dmm boxes do have a bit more recent broadcom chip.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: wma / asf #9
-
- Senior Member
- 627 posts
+26
Good
Posted 14 March 2014 - 18:11
I Have a vu plus duo 2 and the wma files asf work fine ..I wondered if in the future this could be working in the dream 8000 ..thanks !
enabled wma/wmv support for dm8000
Re: wma / asf #10
-
- PLi® Core member
- 57,163 posts
+698
Excellent
Posted 14 March 2014 - 18:45
This is a wonder after all these years....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: wma / asf #11
-
- Senior Member
- 373 posts
+5
Neutral
Posted 14 March 2014 - 20:59
This is a wonder after all these years....
Some people and companies never stop to amaze us. 
Would be nice to have the new drivers and kernel in OpenPli.
Re: wma / asf #12
-
- Senior Member
- 3,000 posts
+51
Good
Posted 14 March 2014 - 21:08
This is a wonder after all these years....
Don't think it's a wonder.
I think that they have seen the et10000 or et8000
ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.
Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release
Re: wma / asf #13
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 15 March 2014 - 07:34
And all other Xtrend's and VU's.
Don't think it's a wonder.This is a wonder after all these years....
I think that they have seen the et10000 or et8000
Re: wma / asf #14
-
- Member
- 24 posts
+1
Neutral
Posted 15 March 2014 - 09:21
wma asf all work fine now ...dream7020 v2 is cool
Re: wma / asf #15
-
- Senior Member
- 3,131 posts
+140
Excellent
Posted 15 March 2014 - 10:33
wma asf all work fine now ...dream7020 v2 is cool
For the dm8000 You just need to install gst-ffmpeg. The current driver still does not support wma. That off dm800se and 7020hd well so there gst-ffmepg is not required.
telnet to you're box, and use :
opkg install gst-ffmpeg.
Then it works up to wma version 8 (not 9) trough software decoding using gstreamer for asf I do not know.
Re: wma / asf #16
-
- Senior Member
- 1,490 posts
+47
Good
Posted 15 March 2014 - 11:19
Latest OE2.0 Driver Dreambox DM8000 (14/03/2014)
dreambox-dvb-modules: update dm8000 hardware drivers
- added read ddp passthrough
- added WMA and WMV support
Vu+DUO4K, (DVB-C FBC & DVB-S2X FBC twin tuner), OpenPLi Nightly Build, My-FullNightHD skin, Bluetooth remote,
2x Synology DS-116, 16 Gb USB3, Autotimer, Bitrate, EPG-Import, Ziggo Kabel-tv, Astra 28.2.
Re: wma / asf #17
-
- Senior Member
- 1,531 posts
+118
Excellent
Posted 15 March 2014 - 12:36
So if I understand correctly the dm8000 (I thought it was not supported anymore?) can hardware decode wma/wmv using the new drivers.
The dm800se/dm500hd/dm7020hd will do it in software using gst-ffmpeg?
Re: wma / asf #18
-
- Member
- 24 posts
+1
Neutral
Posted 15 March 2014 - 12:55
I don't think so not to my knowledge
Re: wma / asf #19
-
- PLi® Core member
- 70,501 posts
+1,810
Excellent
Posted 15 March 2014 - 13:40
In general you can forget decoding in software. The box has just enough CPU to drive the GUI.
The hardware must support it, and the drivers must enable it (which usually depends on the license the manufacturer bought).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: wma / asf #20
-
- Senior Member
- 373 posts
+5
Neutral
Posted 15 March 2014 - 16:27
In general you can forget decoding in software. The box has just enough CPU to drive the GUI.
The hardware must support it, and the drivers must enable it (which usually depends on the license the manufacturer bought).
That's why the new drivers for DM8000 from 13-03-2014 are nice.
They have hardware wma/wmv support.
But you need to have them installed in OpenPLI 4.0 with the new gst-dbdmediasink from schwerkraft git, before you can use the hardware decode .
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
