Jump to content


Photo

Crash after blindscan - ET9000

ET9x00 blindscan

  • Please log in to reply
59 replies to this topic

Re: Crash after blindscan - ET9000 #41 Huevos

  • PLi® Contributor
  • 3,184 posts

+130
Excellent

Posted 2 March 2014 - 13:48

Yes, it's unavoidable.because in the case of the Ultimo or Duo2 you can have both AVL2108 and AVL6222 tuners in the same receiver and each requires it's correct binary.

It's a shame vuplus didn't (apparently) produce one binary for all, checking the exact tuner type itself.

>Yes, the Vu+ binaries are capable of only including a specific SR range, but that is irrelevant, because if they weren't you could still do this filtering in the .py file.

But in that case it wouldn't give any speedup.

It's a shame vuplus didn't (apparently) produce one binary for all

Yes, but that's the way it is. Now we can only work with what there is.

 

But in that case it wouldn't give any speedup.

The major delay is the binary and subsequent service search, not the few microseconds it take the .py file to run.



Re: Crash after blindscan - ET9000 #42 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 2 March 2014 - 14:25

The major delay is the binary and subsequent service search, not the few microseconds it take the .py file to run.

I understand, but were talking of the situation where a binary wouldn't support selective SR scanning.
* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #43 Huevos

  • PLi® Contributor
  • 3,184 posts

+130
Excellent

Posted 2 March 2014 - 14:48

The major delay is the binary and subsequent service search, not the few microseconds it take the .py file to run.

I understand, but were talking of the situation where a binary wouldn't support selective SR scanning.

Erik, the OE-Alliance plugin runs through the output of the binary anyway and checks frequency, SR, etc correspond with the parameters the user entered. It's the only way to ensure these values are "clean" before handing them over for a service search... otherwise -> BSoD.



Re: Crash after blindscan - ET9000 #44 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 2 March 2014 - 14:59

I'll have a look some time. But as said before, it already does some sanity checking.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #45 Huevos

  • PLi® Contributor
  • 3,184 posts

+130
Excellent

Posted 2 March 2014 - 17:29

Adapted version of the plugin for openPli.

 

Thanks to the author Huevos  :)

For the opportunity to adapt the plugin.

 

P.S.Support only ET and VU+ box.

Dima, can you post the .py file please.



Re: Crash after blindscan - ET9000 #46 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 2 March 2014 - 17:37

If so, can someone also add it to e2openplugins or give permission to do so?


Edited by Erik Slagter, 2 March 2014 - 17:38.

* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #47 Dimitrij

  • PLi® Core member
  • 7,583 posts

+247
Excellent

Posted 2 March 2014 - 18:27

Dima, can you post the .py file please.

Ок.


Duo 4K/Lunix3-4K/Solo 4K


Re: Crash after blindscan - ET9000 #48 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 3 March 2014 - 18:14

Is there any COPYRIGHT or LICENSING applicable on this code? I can't find any. I would like to add it to e2openplugins.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #49 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 3 March 2014 - 18:18

I'd like to have the GSOD crash log when running satscan, so I can fix it.


Edited by Erik Slagter, 3 March 2014 - 18:18.

* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #50 Robinson

  • Senior Member
  • 2,523 posts

+30
Good

Posted 3 March 2014 - 22:02

Erik, it's in this post: http://openpli.org/f...ndpost&p=404784


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W


Re: Crash after blindscan - ET9000 #51 Huevos

  • PLi® Contributor
  • 3,184 posts

+130
Excellent

Posted 5 March 2014 - 09:23

Is there any COPYRIGHT or LICENSING applicable on this code? I can't find any. I would like to add it to e2openplugins.

Yes there a license. And Dima73 said he was going to post the changelog.

Attached Files


Edited by Huevos, 5 March 2014 - 09:24.


Re: Crash after blindscan - ET9000 #52 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 5 March 2014 - 15:22

I interpret this as, "we can fork it, as long as we keep the license". I see no authors that can be contacted.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #53 Rob van der Does

  • Senior Member
  • 7,738 posts

+184
Excellent

Posted 5 March 2014 - 17:59

Yeah, seems correct. Maintainer info has been added.

Re: Crash after blindscan - ET9000 #54 Huevos

  • PLi® Contributor
  • 3,184 posts

+130
Excellent

Posted 5 March 2014 - 23:02

I see no authors that can be contacted.

Erik, I wrote most of the functionality of the current plugin a couple of years ago, but am not the original author. My starting point was the blindscan plugin from the ViX image. And since then it has been updated by Andy and various others from the OE-Alliance to add more tuner types and receivers.


Edited by Huevos, 5 March 2014 - 23:03.


Re: Crash after blindscan - ET9000 #55 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 6 March 2014 - 10:36

Hmmm. Are you okay if I put the source on e2openplugins? The LICENSE permits so, but I'd rather have consensus.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #56 Rob van der Does

  • Senior Member
  • 7,738 posts

+184
Excellent

Posted 6 March 2014 - 10:45

On behalf of the OE-A: yes. That's what the licence is meant for.

And the OE-A does the same with a number of E2O- and other plugins.



Re: Crash after blindscan - ET9000 #57 Erik Slagter

  • PLi® Core member
  • 46,648 posts

+531
Excellent

Posted 6 March 2014 - 10:50

Hmmm. Are you okay if I put the source on e2openplugins? The LICENSE permits so, but I'd rather have consensus.

And huevos?


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Crash after blindscan - ET9000 #58 Rob van der Does

  • Senior Member
  • 7,738 posts

+184
Excellent

Posted 6 March 2014 - 10:56

As I said

On behalf of the OE-A

 

And Huevos is a member as well.



Re: Crash after blindscan - ET9000 #59 Huevos

  • PLi® Contributor
  • 3,184 posts

+130
Excellent

Posted 6 March 2014 - 20:28

As I said

On behalf of the OE-A

 
And Huevos is a member as well.
Yes, exactly.

Re: Crash after blindscan - ET9000 #60 Dimitrij

  • PLi® Core member
  • 7,583 posts

+247
Excellent

Posted 15 March 2014 - 10:13

ver. 1.4

-add support VU+Solo2

patch:

https://github.com/o...c05cd7d9134b276


Edited by Dima73, 15 March 2014 - 10:14.

Duo 4K/Lunix3-4K/Solo 4K






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users