Try mplayer, it will work regardless.But before inventing things just try in You're case .... To set the transcoding-setup.sh on 720p reboot you're box and try with vlc at thread 0. It most probably will not work.
The same with vlc at stream1 . It will do.
Transcoding problem
Re: Transcoding problem #61
Posted 29 March 2014 - 10:50
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #62
Posted 29 March 2014 - 10:51
You have all very valid remarks. This will be implemented in a completely different way though, please wait a bit.Now for something completely different:
There are two entries in inet.conf for transcoded streaming:8003 stream tcp nowait root /usr/bin/filestreamproxy filestreamproxy 8002 stream tcp nowait root /usr/bin/livestreamproxy livestreamproxyI noticed that other images also use a streamproxy for the regular "plain" streaming, e.g. Vu+ original, HDMU, ...:8001 stream tcp nowait root /bin/streamproxy streamproxy1. Can we have a separated streamproxy in OpenPLi too?
2. Could you please change the default lines in inetd.conf to8003 stream tcp6 nowait root /usr/bin/filestreamproxy filestreamproxy 8002 stream tcp6 nowait root /usr/bin/livestreamproxy livestreamproxyThis would enable IPv6 (plus IPv4) connections to those proxies (Which is also the reason why I would prefer a separate streamproxy for port 8001 rather than the built in functionality).
Edited by Erik Slagter, 29 March 2014 - 10:52.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #63
Posted 29 March 2014 - 10:52
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #64
Posted 29 March 2014 - 11:28
Well, the main point is that they can easily be cheated into Dual-Stack-mode on their external side by adding a single char to inetf.conf rather than having to rewrite a C++ class ...BTW what is exactly the advantage of having an additional streaming proxy besides the internal enigma proxy?
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390
Re: Transcoding problem #65
Posted 29 March 2014 - 11:29
When I try, it's save the stream to disk. I abort after about 14MB (52 sec). Then rename to somethin.mpg and play it with VLC. All I get are an blank screen without any audio.
When look at the output from the VLC in the console, this is what I get:
VLC media player 2.0.8 Twoflower (revision 2.0.8a-0-g68cf50b)[0x1a82048] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.[0x7fbb54c01a38] ts demux error: MPEG-4 descriptor not found[0x7fbb54e00188] packetizer_mpeg4audio packetizer: AAC channels: 2 samplerate: 48000Fontconfig warning: FcPattern object size does not accept value "0"Fontconfig warning: FcPattern object size does not accept value "0"[h264 @ 0x7fbb54cf8da0] illegal short term buffer state detected[h264 @ 0x7fbb54cf8da0] Missing reference picture[h264 @ 0x7fbb54d4eba0] Width/height changing with threads is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.[h264 @ 0x7fbb54d4eba0] decode_slice_header error
That problem is indeed on some vuduo2 (Not all as seems that space rat does not have this)
Just start vlc normally whitout link out of web browser.
Go to preferences. Select all in the menu below goto section input / codecs then videocodecs then FFmpeg and set Threads to 1 save . Close vlc.
Then it will run fine
Re: Transcoding problem #66
Posted 29 March 2014 - 12:33
Well, the main point is that they can easily be cheated into Dual-Stack-mode on their external side by adding a single char to inetf.conf rather than having to rewrite a C++ class ...BTW what is exactly the advantage of having an additional streaming proxy besides the internal enigma proxy?
Ok. Both ipv6 and ipv4 access will be possible with what I am planning, streaming and transcoding.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #67
Posted 29 March 2014 - 12:35
[h264 @ 0x7fbb54d4eba0] Width/height changing with threads is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a
That problem is indeed on some vuduo2 (Not all as seems that space rat does not have this)
Yes, the encoder will switch frame size within a few frames. Blame VU+ OTOH I've never had this problem, so your vlc probably indeed has an ancient h264 decoder.
Edited by Erik Slagter, 29 March 2014 - 12:35.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #68
Posted 29 March 2014 - 14:57
[h264 @ 0x7fbb54d4eba0] Width/height changing with threads is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a
That problem is indeed on some vuduo2 (Not all as seems that space rat does not have this)
Yes, the encoder will switch frame size within a few frames. Blame VU+ OTOH I've never had this problem, so your vlc probably indeed has an ancient h264 decoder.
actually it's pretty recent. The ubuntu one is older 2.0.8 but I have an own one and that is the latest version. 2.1.3 but even the beta version 2.1.4 is same. It's definitely the stream setting. But does not mather it works with thread 1. so no problem. Since Spacerat does not have that (but a lot others well) I'm so what shure that it depends on the tuner installed into the vuduo2 box.
What is now the curious issue, wel that what ever is done my box always first select 1280 x 720 720p default. later on that is adjusted. That is 1000 % bit difficult that 1000 I really did all possible things to try to change that. Impossible.
From where it comes That I just can guess but from tuner self or eighter the correlation driver and tuner type . And the driver is closed source.
Re: Transcoding problem #69
Posted 29 March 2014 - 15:04
The tuner outputs raw transport stream packets. It does nothing with resolution, it the transport stream that the broadcaster sends towards the satellite.
The encoder (transcoding) on the other hand, produces a h264 stream (within a transport stream), and has full control over frame size and other metadata. The encoder switches between frame size. That is allowed for a h264 stream, I am not sure whether it's allowed within DVB though.
Anyway, mplayer can cope with it just fine.
Also distributions tend to have a really old version of ffmpeg (around 5 years or similar) because they don't understand the development cycle of ffmpeg (/libav), there are no frequent releases. You're better of compiling ffmpeg and mplayer yourself.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #70
Re: Transcoding problem #71
Posted 29 March 2014 - 15:26
Mplayer from the distro feed is even worse.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #72
Posted 29 March 2014 - 15:29
Yepp.Also distributions tend to have a really old version of ffmpeg (around 5 years or similar) because they don't understand the development cycle of ffmpeg (/libav), there are no frequent releases. You're better of compiling ffmpeg and mplayer yourself.
Indeed his log output says
"[h264 @ 0x7fbb54d4eba0] Width/height changing with threads is not implemented. Update your Libav version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented."
The whole concept of working with dirty versions (old base version plus hacks (called "backports") as the devs deem fit for the user) is totally alien to me.
If version 2.3 fixes issues I have with version 2.1, I wouldn't try to isolate the required fix and backport it to 2.1 but instead just install version 2.3.
I wonder if you can spot any two Lunix distros sharing the same source for at least one package.
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390
Re: Transcoding problem #73
Posted 29 March 2014 - 15:33
LOL...
Anyway, for the larger part of the packages it isn't that important. BUT for multimedia packages, distro's are always afraid of law suits, and that's why they include crippled (and also ancient?!?!?) versions.
If you're serious about multimedia, you cannot avoid compiling some packages yourself.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Transcoding problem #74
Re: Transcoding problem #75
Re: Transcoding problem #76
Re: Transcoding problem #77
Posted 29 March 2014 - 19:35
Huh?Do you need a password for the webif?
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390
Re: Transcoding problem #78
Re: Transcoding problem #79
Posted 31 March 2014 - 08:58
Transcoding on mobile like ipad.
That works good if working trough http. all ok (even with auth . Off course you're sending password plain that's not ok.)
If I enable https (whitout aut) . starting webif trough https ok, but when trying to play it does not play. Obviousely the goal is to do this with auth in webif, but now just testing whitout and it does not work.
Re: Transcoding problem #80
10 user(s) are reading this topic
0 members, 10 guests, 0 anonymous users