Posted 27 March 2014 - 07:38
Hello to everyone from greece!
I use an octagon sf8 hd with latest openpli and want to install a crypto pc50a. When installing crypto on my pc is recognised as realtek dvb-t device so i suppose it uses realtek 2832 chipset. I installed drivers for realtek 2832 but i can't see any dvb-t tuner on my receiver. Is there anything else i should do to make it work?
Posted 16 April 2014 - 19:40
Any help with my dvb-t stick?
Posted 16 April 2014 - 21:25
opkg update
opkg install kernel-module-dvb-usb-rtl28xxu
opkg install kernel-module-fc0012
Mut@nt HD51 STB 4K
Posted 17 April 2014 - 06:32
thank you for your help, i tried that but it is not working...i don't know if i am doing something wrong
Posted 17 April 2014 - 09:39
Can you check follow
Start box up and when it's starts press usb device in the box.
What does commando "dmesg" show.
The last 10/20 lines are only important this shows the connection and give you probably an error messages.
Mut@nt HD51 STB 4K
Posted 25 April 2014 - 09:55
anything?
Posted 7 May 2014 - 15:59
anything?is it so difficult to install a dvb-t stick on a receiver?
Posted 4 June 2014 - 02:28
Come on guys, this is supposed to be an official forum and you can't help someone to make a damn dvb-t stick working?
Posted 4 June 2014 - 05:58
opkg install kernel-module-rtl2832 opkg install kernel-module-dvb-usb-rtl2832
Posted 4 June 2014 - 08:01
I downloaded firmware from openpli for my receiver (same as xp1000) so i believe that it is supported.
Thank you for your help the receiver found the stick now, but when scanning can't find any channels.
Anything i can do?
Posted 4 June 2014 - 10:48
The fact that someone made a box that happens to run an image we create for another box doesn't say we will support the box.
Al this illegal use of OpenPLi costs us a lot of money (as those images use our feeds, our server and bandwidth requirements have been going through the roof lately).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 4 June 2014 - 16:21
And even if the receiver was supported, that doesn't mean we guarantee that every USB device you buy will work with it, that is not meant by "supported".
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 4 June 2014 - 16:38
I never said that...
And i thought that since octagon is a well known company and not a cheap-clone manufacturer the receiver is supported by your team since i find suitable software in your download area.Maybe i am wrong i do not insist.But it was not of my knowledge that this software was not originaly intended to be used for this receiver.
Maybe the fact that in openvix team they suggest their software for both the octagon/max receivers made me think something wrong.
Now that my usb dvb-t device works but can't find any channel, is there anything i can do?
Posted 4 June 2014 - 17:09
Make sure that you are using correct DVB-T frequencies (eg Europe, Middle East, Africa DVB-T Frequencies should be ok for Greece).Now that my usb dvb-t device works but can't find any channel, is there anything i can do?
Edited by athoik, 4 June 2014 - 17:09.
Posted 4 June 2014 - 17:34
Yes dvb-t frequencies are for europe and the stick is working on my pc.
Posted 4 June 2014 - 18:19
To make it very clear: "Supported" for us means "We have that hardware, and we test the software we produce on it. And if there is an issue, we have to hardware to reproduce it".
So even if an image for box A works on box B, it's still not a tested combination, hence the "no support". We have been chasing too many ghosts over the last 10 years, with issues that turned out to be hardware related.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 3 guests, 0 anonymous users
