thanks Erik Slagter
Problem with the OPENPLI4 on VU+DUO2
Started by ana_simo_sat, 28 Mar 2014 00:58
26 replies to this topic
Re: Problem with the OPENPLI4 on VU+DUO2 #22
-
- PLi® Core member
- 2,270 posts
+118
Excellent
Posted 28 March 2014 - 21:33
The problem is lame programmers using an "int" to store time, while they should be using a "time_t" as is stated in the manual page. Time_t should be an unsigned int so this problems shouldn't occur. Unix doesn't know of dates < 1970, a time should always be positive 32 bits. Or even better 64 bits.
well, busybox date command (at least on our boxes) seems to be definitely affected by this y2038 bug
bart@bart:~$ ssh root@192.168.2.111 root@et9x00:~# date -D "%s" -d 2147483647 Tue Jan 19 04:14:07 CET 2038 root@et9x00:~# date -D "%s" -d 2147483648 Fri Dec 13 21:45:52 CET 1901
True sarcasm doesn't need green font...
Re: Problem with the OPENPLI4 on VU+DUO2 #23
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 28 March 2014 - 21:37
Nasty...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Problem with the OPENPLI4 on VU+DUO2 #24
-
- Senior Member
- 1,128 posts
+34
Good
Posted 28 March 2014 - 22:59
Hi
Nice for You but that does not work out. And the max partion size for fat32 is 4GB.
you have something mixed up. 4GB is max file size. Max partition size is 2/16TB. I use a 26GB partition of a 32GB stick.
ciao
Re: Problem with the OPENPLI4 on VU+DUO2 #25
-
- Senior Member
- 420 posts
+14
Neutral
Posted 1 April 2014 - 00:58
small note one
Use an usb stick off max 2 Gb formated fat32
It's max physical 2 GB using a bigger stick with smaller partition does not work unfortunately I tried it.
I can support what Trial says about usb stick size:
My duo2 has an 8GB stick in one of its rear USB ports put-in permanently, one (first primary) 2GB fat32 partition for image flash only (files are transmitted via network), and the rest (ca. 6GB) is in second (primary) ext4 partition. I flashed different images many times (openpli mostly, of course) and I never had a problem.
Re: Problem with the OPENPLI4 on VU+DUO2 #26
-
- Senior Member
- 3,131 posts
+140
Excellent
Posted 4 April 2014 - 09:59
Hi
Nice for You but that does not work out. And the max partion size for fat32 is 4GB.
you have something mixed up. 4GB is max file size. Max partition size is 2/16TB. I use a 26GB partition of a 32GB stick.
ciao
Trough indeed.
Then it must be a problem on my specific 4 gb usb stick (which for the rest works very fine)
Ill try next time I wan't to flash another one off 8 GB or 16 GB
Re: Problem with the OPENPLI4 on VU+DUO2 #27
-
- Senior Member
- 3,131 posts
+140
Excellent
Posted 15 April 2014 - 12:53
And indeed .
The problems about flashing is specifically related to one type !! off usb stick
The sandisk cruzer 4 GB usb 2.0 flash drive sdcz36 type. (I have two off them, both have it)
All my others whatever factory 1 Gb or 2 GB or 4 GB or 8 GB or 16 GB (also the sandisk) are all ok.
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
