38 replies to this topic

[desertstorm]

Hello I have this usb dvb-t tuner but et4000 with openpli won't recognize it; I installed these drivers from plugin manager: it913x, af9035 and af9015 but without success.

Reading on internet I found that a patch at kernel level could be necessary: https://patchwork.ke.../patch/1905731/

Could it be usueful to solve the problem or it is just included in latest openpli for et4000?? 

 

[jpuigs]

I have a similar problem like yours.

I have a Et8000, and I'm trying to install a AverTV Volar HD PRO usb device.

Reading lsusb, I see that my device is 07ca:1835.

I've installed:

 

enigma2-plugin-drivers-dvb-usb-af9035 - 1.0-r0
firmware-dvb-usb-af9035-02 - 1.0-r0
firmware-dvb-usb-it913x - 1.0-r0
kernel-module-af9033 - 3.13.6-r0.0
kernel-module-dvb-usb-af9035 - 3.13.6-r0.0
kernel-module-dvb-usb-v2 - 3.13.6-r0.0
kernel-module-tda18218 - 3.13.6-r0.0
 

and reading dmesg I see the box doesn't still recognize it.

Am I forgettng something ?

 

 

I remember I installed one device like that (it was 07ca:a835) on my et9000, and I had no problems.

[desertstorm]

My Device ID is 07ca:3835...

[jpuigs]

I've added drivers for AF9015  and IT813x, and now it is detected. But after rebooting it isn't still shown on tuners section.

It should be seen as TUNER D, but it doesn' appear.

 

Does anybody know what I'm doing wrong ??

 

 

dmesg says:

 

it913x: Chip Version=02 Chip Type=9135
it913x: Remote propriety (raw) modeit913x: Dual mode=0 Tuner Type=38
it913x: Unknown tuner ID applying default 0x60<6>usb 2-1: dvb_usb_v2: found a 'Avermedia A835B(1835)' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Deviceit913x: Chip Version=02 Chip Type=9135
it913x: Firmware Version 52887808<6>usb 2-1: dvb_usb_v2: found a 'Avermedia A835B(1835)' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Avermedia A835B(1835))
DVB: Unable to find symbol it913x_fe_attach()
usbcore: registered new interface driver dvb_usb_it913x

[jpuigs]

Solved.

I installed kernel-module-it913x-fe

 

 

it913x: Chip Version=02 Chip Type=9135
it913x: Remote propriety (raw) modeit913x: Dual mode=0 Tuner Type=38
it913x: Unknown tuner ID applying default 0x60<6>usb 2-1: dvb_usb_v2: found a 'Avermedia A835B(1835)' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Deviceit913x: Chip Version=02 Chip Type=9135
it913x: Firmware Version 52887808<6>usb 2-1: dvb_usb_v2: found a 'Avermedia A835B(1835)' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Avermedia A835B(1835))
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
it913x-fe: Tuner LNA type :60
usb 2-1: DVB: registering adapter 1 frontend 0 (Avermedia A835B(1835)_1)...
Registered IR keymap rc-it913x-v2
input: Avermedia A835B(1835) as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0/input3
rc0: Avermedia A835B(1835) as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0
usb 2-1: dvb_usb_v2: schedule remote query interval to 250 msecs
usb 2-1: dvb_usb_v2: 'Avermedia A835B(1835)' successfully initialized and connected
root@et8000:~#

[jpuigs]

So, to help other people to make it work, -I don't know if everything is really necessary-  I have installed the following:

 
enigma2-plugin-drivers-dvb-usb-af9015 - 1.0-r3
enigma2-plugin-drivers-dvb-usb-af9035 - 1.0-r0
enigma2-plugin-drivers-dvb-usb-it913x - 1.0-r0
firmware-dvb-fe-af9013 - 1.0-r0
firmware-dvb-usb-af9015 - 1.0-r0
firmware-dvb-usb-af9035-02 - 1.0-r0
firmware-dvb-usb-it913x - 1.0-r0
kernel-module-af9033 - 3.13.6-r0.0
kernel-module-dvb-usb - 3.13.6-r0.0
kernel-module-dvb-usb-af9015 - 3.13.6-r0.0
kernel-module-dvb-usb-af9035 - 3.13.6-r0.0
kernel-module-dvb-usb-it913x - 3.13.6-r0.0
kernel-module-dvb-usb-v2 - 3.13.6-r0.0
kernel-module-it913x-fe - 3.13.6-r0.0
kernel-module-tda18218 - 3.13.6-r0.0

Edited by jordi.puig, 3 April 2014 - 23:39.

[desertstorm]

How do you install kernel-module-dvb-usb-it913x-3.13.6-r0.0?? My Et4000 openpli has the latest kernel 3.8.7... Do you install on a different decoder??

Edited by desertstorm, 5 April 2014 - 11:50.

[WanWizard]

That looks like the list on the ET8000.

[desertstorm]

What is the latest kernel for et4000? I think that kernel newer than 3.12 will support the Avermedia A835B...

[desertstorm]

The latest kernel for et4000 seem 3.8.7... Anyone can tell me how to apply the patch in the first post to this kernel? Can this patch be included in the openpli sourcecode for et 4000?

Edited by desertstorm, 6 April 2014 - 10:23.

[jpuigs]

Why don't you show us a dmesg ?

 

This patch sure it's included, it's from 2 years ago. My device is recognised, so youyrs shoudl be too.

Edited by jordi.puig, 6 April 2014 - 10:56.

[desertstorm]

usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 5 using ehci-brcm
usb 1-1.1: USB disconnect, device number 5
usb 1-1.1: new high-speed USB device number 6 using ehci-brcm
root@et4x00:~# lsusb
Bus 001 Device 002: ID 1a40:0101
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 006: ID 07ca:3835
Bus 001 Device 004: ID dead:beef
root@et4x00:~#

This is dmesg and lsusb response.

 

 

[jpuigs]

Are you sure you have installed all these ?

enigma2-plugin-drivers-dvb-usb-it913x
firmware-dvb-usb-it913x
kernel-module-dvb-usb-it913x
kernel-module-dvb-usb-v2
kernel-module-it913x-fe

[desertstorm]

root@et4x00:~# opkg install enigma2-plugin-drivers-dvb-usb-it913x
Package enigma2-plugin-drivers-dvb-usb-it913x (1.0-r0) installed in root is up to date.
root@et4x00:~# opkg install firmware-dvb-usb-it913x
Package firmware-dvb-usb-it913x (1.0-r0) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-dvb-usb-it913x
Package kernel-module-dvb-usb-it913x (3.8.7-r6.11) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-dvb-usb-v2
Package kernel-module-dvb-usb-v2 (3.8.7-r6.11) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-it913x-fe
Package kernel-module-it913x-fe (3.8.7-r6.11) installed in root is up to date.
root@et4x00:~#

I tried to reinstall as you suggest and I have this response.

[jpuigs]

OK. I see. I don't know anything more. Sorry.

[desertstorm]

At this point I think the only solution is the upgrade of the kernel to 3.13 for et4000... Is this upgrage in program or et4000 will not be upgraded anymore??? 

[stevom]

Hello,

 

works now 07ca:3835 with et4000 for you, desertstorm?

 

I have et9000 and 07ca:1835.

I have installed all packages as jpuigs in #6 and desertstorm in #14 wrote, but the tuner was not recognized.

 

The OpenPLI image from 2014-05-19 has still the kernel 3.8.7.

 

Can please anyone help me?

[athoik]

Hello,

Here is a patch for OpenPLi OE that adds support for A835 (in Xtrend with kernel 3.7.8) from the patch provided at first post.

 0001-Support-Avermedia-A835B.patch   2.99KB   76 downloads

[stevom]

Thank you much for the patch file.

But how can I apply this patch?

[athoik]

you need to setup build environment in order to build your modified image or you need to wait until patch commited