Hello
I hope that this is the right place to post this problem.
have installed OPENPLI 4.0 on my Dreambox 800 se. All works fine except the Usb tuner Pinnacle PCTV Hybrid Pro 330E that Is detected after the installation of the EM28XX driver but the scan find 0 channels.
I have selected Europe and Africa in the setting of the dvb tuner configuration but I am not able to find any channel.
At first, after have checked the output of the command DMESG, I noted the following line:
[ 58.999000] drxd: firmware load failure [drxd-a2-1.1.fw]
Therefore I have copied the missing firmware on the path /lib/firmware but the scan continue to find 0 channels.
I tried to follow some suggestions in another post copying the following firmwares in /lib/firmware path:
drxd-a2-1.1.fw
drxd-b1-1.1.fw
xc3028-v27.fw
Unfortunately the problem is not solved yet but analysing the output of the DMESG command performed during the scan, I noted this error:
xc2028 4-0061: xc2028/3028 firmware name not set!
I have attached the output of the DMESG command performed at the startup of the decoder and during the scan.
I hope that someone could give me some suggestions.
Thank's a lot !
