5 replies to this topic

[pe2mbs]

Hi all, 

 

i want to try to build OpenPli 3.0 for my dm7020hd, this is due current problems with streaming channels to XBMC engina client. Under OpenPli 3.0 it worked perfectly.

 

I tried first to build the OpenPli 4.0 on Ubuntu 14.04 i386 (used this link http://users.telenet...npliubuntu.html), this failed miserably. due to problems with invalid checksums, so therefore I don't want to invest in this route any more. 

 

So my question is can anyone help me setup my build environment and preferably for OpenPli 3.0

 

Any help would be appreciated,

 

Marc   

Edited by pe2mbs, 14 July 2014 - 19:09.

[athoik]

Try those commands:

1. Install as Root the prerequisites (sudo or su -)

apt-get install gawk wget git-core cvs subversion diffstat unzip texinfo gcc-multilib build-essential chrpath


2. Clone OpenPLi OE

cd ~

git clone -b openpli-3 git://git.code.sf.net/p/openpli/openpli-oe-core openpli3

cd openpli3

3. First run make to download OE subprojects

cd ~/openpli3

make

4. Check site.conf (eg mofify sources dir)

vi site.conf

5. Make image...

cd ~/openpli3

MACHINE=XXX make image

Good luck

[hemertje]

OpenPLi 3 is no longer developed

better is to build OpenPli 4 and to see where it goes wrong

[pe2mbs]

Try those commands:

1. Install as Root the prerequisites (sudo or su -)

apt-get install gawk wget git-core cvs subversion diffstat unzip texinfo gcc-multilib build-essential chrpath


2. Clone OpenPLi OE

cd ~

git clone -b openpli-3 git://git.code.sf.net/p/openpli/openpli-oe-core openpli3

cd openpli3

3. First run make to download OE subprojects

cd ~/openpli3

make

4. Check site.conf (eg mofify sources dir)

vi site.conf

5. Make image...

cd ~/openpli3

MACHINE=XXX make image

Good luck

Thanks athoik for your help, i'll try this.

Marc

[pe2mbs]

OpenPLi 3 is no longer developed
better is to build OpenPli 4 and to see where it goes wrong

Yes, i known and i did already some investigation on this problem, and posted my issue on this forum, but i didn't get any reply on my post http://openpli.org/f...nigmavu-client/ There where i'm not a DVB specialist some help is needed. Besides this we use the SAT receiver for watching TV in living and bed room and its not for me to play with the software, i have a wife too :-D

But if your offering some more help feel free...


Marc

[pe2mbs]

Try those commands:

1. Install as Root the prerequisites (sudo or su -)

apt-get install gawk wget git-core cvs subversion diffstat unzip texinfo gcc-multilib build-essential chrpath


2. Clone OpenPLi OE

cd ~

git clone -b openpli-3 git://git.code.sf.net/p/openpli/openpli-oe-core openpli3

cd openpli3

3. First run make to download OE subprojects

cd ~/openpli3

make

4. Check site.conf (eg mofify sources dir)

vi site.conf

5. Make image...

cd ~/openpli3

MACHINE=XXX make image

Good luck

Thanks athoik for your help, i'll try this.

Marc

OpenPLi 3 no longer builds correctly, but found out that my problem was introduced already in version 3, so will switch back to version 4. build that and try to find out where the problem comes from.