Posted 31 July 2014 - 21:35
Op mijn VU+ Ultimo loopt na de laatste update (31 aug.) vast met een groene scherm bij de Duitse zender VOX.
Ik krijg deze fout ook niet weer weg daar de Ultimo iedere keer opnieuw opstart. Ook niet wanneer ik een zender
verder wil, dan komt telkens weer de groene scherm te voorschijn enz., enz.
Ik zal wel genoodzaakt zijn om alles opnieuw in te lezen?
Posted 31 July 2014 - 21:51
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 31 July 2014 - 22:10
Dan loopt de flux capacitor niet goed 
Posted 1 August 2014 - 00:45
Waarschijnlijk heb ik zelfde probleem op Vu+ Duo2. Na starten blijft OLED op regenboog boot staan. Software update geeft groen scherm en reboot van Enigma en Deep Standby geeft ook groen scherm en reboot van Enigma (dus geen standby). Kan nog wel een opkg upgrade doen, maar zelfde probleem blijft.:
<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Fri Aug 1 01:27:52 2014</crashdate>
<compiledate>Jul 31 2014</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PLi-HD/skin.xml</skin>
<sourcedate>2014-07-30</sourcedate>
<branch>(no branch)</branch>
<rev>e9034f2</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>duo2</stbmodel>
<kernelversion>
<![CDATA[
Linux vuduo2 3.3.8-2.0 #1 SMP Sat Feb 22 05:08:27 CET 2014 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>ubiroot rootflags=sync bmem=192M@64M bmem=458M@512M memc1=590M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs libata.force=1:1.5Gbps</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
openpli 4 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
o cuesheet interface
RemovePopup, id = ZapError
allocate channel.. 08a3:2210
opening frontend 2
(2)tune
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:B:8A3:2210:EEEE0000:0:0:0:
allocate demux
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
[ePopen] command: route -n | grep ra0
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
poll: unhandled POLLERR/HUP/NVAL for fd 47(17)
poll: unhandled POLLERR/HUP/NVAL for fd 49(17)
poll: unhandled POLLERR/HUP/NVAL for fd 52(17)
poll: unhandled POLLERR/HUP/NVAL for fd 55(17)
[SEC] startTuneTimeout 5000
[SEC] setVoltage 1
[SEC] setFrontend 1
setting frontend 2
(2)fe event: status 0, inversion off, m_tuning 1
nameservers: [[8, 8, 8, 8], [10, 1, 8, 11]]
read configured interface: {'lo': {'dhcp': False}, 'ra0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'ra0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:00:00:00:00:00', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'mac': '00:1d:ec:05:e0:64', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
AT plugin not found
ER plugin not found
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
poll: unhandled POLLERR/HUP/NVAL for fd 42(17)
(2)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1b30990 running
[eEPGCache] channel 0x1b30990 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f5
allocate demux
decoder state: play, vpid=1011, apid=1012
DMX_SET_PES_FILTER(0x3f3) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x3f4) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x3f3) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x3f5) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
File not exists : /tmp/.sock.hbbtv.cmd
No found pipe!!
[eDVBCAService] new service 1:0:1:B:8A3:2210:EEEE0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:B:8A3:2210:EEEE0000:0:0:0:
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 01:26:07
[eDVBLocalTimerHandler] m_time_difference is 1406849127
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
[EPGC] /hdd/epg.dat not found, try /epg.dat
VIDEO_GET_EVENT - ok
[EPGC] next update in 2 sec
PATready
use pmtpid 03f2 for service_id 000b
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f5
decoder state: play, vpid=1011, apid=1012
File not exists : /tmp/.sock.hbbtv.cmd
No found pipe!!
[eDVBCIInterfaces] gotPMT
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
[Dish] tuning failed
sdt update done!
[EPGC] start caching events(1406849169)
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1406849176)
[EPGC] schedule finished(1406849176)
[EPGC] stop caching events(1406849176)
[EPGC] next update in 60 min
(2)fe event: status 0, inversion off, m_tuning 0
stateLostLock
OURSTATE: lost lock, trying to retune
(2)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 1
[SEC] setFrontend 1
setting frontend 2
(2)fe event: status 0, inversion off, m_tuning 1
(2)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f5
decoder state: play, vpid=1011, apid=1012
Send OK!! : OP_HBBTV_UNLOAD_AIT
RemovePopup, id = ZapError
PATready
use pmtpid 03f2 for service_id 000b
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f5
decoder state: play, vpid=1011, apid=1012
Send OK!! : OP_HBBTV_UNLOAD_AIT
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[Dish] tuning failed
action -> InfobarChannelSelection keyUp
action -> OkCancelActions ok
statfs failed!
playing 1:0:1:44D:8A6:2210:EEEE0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:B:8A3:2210:EEEE0000:0:0:0:
[eDVBCAService] free service 1:0:1:B:8A3:2210:EEEE0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1b30990
[eEPGCache] remove channel 0x1b30990
allocate channel.. 08a6:2210
(2)tune
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:44D:8A6:2210:EEEE0000:0:0:0:
allocate demux
[SEC] startTuneTimeout 5000
statfs failed!
[SEC] setVoltage 1
[SEC] setFrontend 1
setting frontend 2
(2)fe event: status 0, inversion off, m_tuning 1
action -> InfobarChannelSelection keyRight
statfs failed!
playing 1:0:1:44E:8A6:2210:EEEE0000:0:0:0:
start release channel timer
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
use cached_channel
[eDVBLocalTimerHandler] channel 0x1b5c9d0 running
[eEPGCache] channel 0x1b5c9d0 running
[EPGC] next update in 2 sec
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:44E:8A6:2210:EEEE0000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (1b6d), and 1 audio stream(s) (1b6e), and the pcr pid is 1b6d, and the text pid is 1b6f
allocate demux
decoder state: play, vpid=7021, apid=7022
DMX_SET_PES_FILTER(0x1b6d) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1b6e) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x1b6d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x1b6f) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
Send OK!! : OP_HBBTV_UNLOAD_AIT
[eDVBCAService] new service 1:0:1:44E:8A6:2210:EEEE0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:44E:8A6:2210:EEEE0000:0:0:0:
RemovePopup, id = ZapError
(2)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
PATready
use pmtpid 1b6c for service_id 044e
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 01:27:16
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
eventNewProgramInfo 0 0
have 1 video stream(s) (1b6d), and 1 audio stream(s) (1b6e), and the pcr pid is 1b6d, and the text pid is 1b6f
decoder state: play, vpid=7021, apid=7022
Send OK!! : OP_HBBTV_UNLOAD_AIT
[eDVBCIInterfaces] gotPMT
[Dish] tuning failed
AITready
Set Channel Info >> sid : 0, onid : 0, tsid : 0, name : , orgid : 0
Name : NED 2 SD HD
URL : http://ctv.distributie.publiekeomroep.nl/carrousel/nl2/index.html
OrgID : 1
AppID : 162
Control Code : 1
Profile Code : 0
Set Channel Info >> sid : 44E, onid : 2210, tsid : 8A6, name : Nederland 2, orgid : 1
VIDEO_GET_EVENT - ok
Send OK!! : OP_HBBTV_UNLOAD_AIT
Send OK!! : OP_HBBTV_UNLOAD_AIT
Send OK!! : OP_HBBTV_UNLOAD_AIT
action -> InfobarChannelSelection keyRight
statfs failed!
playing 1:0:1:44F:8A6:2210:EEEE0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:44E:8A6:2210:EEEE0000:0:0:0:
[eDVBCAService] free service 1:0:1:44E:8A6:2210:EEEE0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
[EPGC] start caching events(1406849237)
start release channel timer
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:44F:8A6:2210:EEEE0000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (1b77), and 1 audio stream(s) (1b78), and the pcr pid is 1b77, and the text pid is 1b79
decoder state: play, vpid=7031, apid=7032
DMX_SET_PES_FILTER(0x1b77) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1b78) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x1b77) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x1b79) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
Send OK!! : OP_HBBTV_UNLOAD_AIT
[eDVBCAService] new service 1:0:1:44F:8A6:2210:EEEE0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:44F:8A6:2210:EEEE0000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 1b76 for service_id 044f
eventNewProgramInfo 0 0
have 1 video stream(s) (1b77), and 1 audio stream(s) (1b78), and the pcr pid is 1b77, and the text pid is 1b79
decoder state: play, vpid=7031, apid=7032
Send OK!! : OP_HBBTV_UNLOAD_AIT
[eDVBCIInterfaces] gotPMT
Send OK!! : OP_HBBTV_UNLOAD_AIT
Send OK!! : OP_HBBTV_UNLOAD_AIT
[Dish] tuning failed
AITready
Set Channel Info >> sid : 0, onid : 0, tsid : 0, name : , orgid : 0
Name : NED 3 SD HD
URL : http://ctv.distributie.publiekeomroep.nl/carrousel/nl3/index.html
OrgID : 1
AppID : 163
Control Code : 1
Profile Code : 0
Set Channel Info >> sid : 44F, onid : 2210, tsid : 8A6, name : Nederland 3, orgid : 1
Send OK!! : OP_HBBTV_UNLOAD_AIT
Send OK!! : OP_HBBTV_UNLOAD_AIT
action -> InfobarEPGActions showEventInfo
warning, skin is missing element FullDescription in <class 'Screens.EventView.EventViewEPGSelect'>
action -> OkCancelActions cancel
statfs failed!
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1406849244)
[EPGC] schedule finished(1406849246)
[EPGC] stop caching events(1406849246)
[EPGC] next update in 60 min
action -> OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
SoftwareUpdate UpdatePlugin
action -> OkCancelActions ok
okbuttonClick
executing opkg update
data: Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-3rd-party.
Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party-vuduo2/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-3rd-party-vuduo2.
Downloading http://downloads.pli-images.org/feeds/openpli-4/all/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-all.
Downloading http://downloads.pli-images.org/feeds/openpli-4/mips32el/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-mips32el.
Downloading http://downloads.pli-images.org/feeds/openpli-4/vuduo2/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-vuduo2.
executing opkg list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 64(16)
OCready
[Skin] Attribute not implemented: layout value: stack
poll: unhandled POLLERR/HUP/NVAL for fd 64(16)
action -> MsgBoxActions cancel
action -> OkCancelActions cancel
action -> OkCancelActions cancel
statfs failed!
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
action -> OkCancelActions ok
okbuttonClick
SleepTimerEdit SleepTimerEdit
Standby Standby
Standby TryQuitMainloop
Standby TryQuitMainloop
Standby TryQuitMainloop
action -> OkCancelActions ok
okbuttonClick
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:44F:8A6:2210:EEEE0000:0:0:0:
[eDVBCAService] free service 1:0:1:44F:8A6:2210:EEEE0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 592, in <module>
plugins.shutdown()
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 146, in shutdown
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 38, in removePlugin
File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 12110, in autostart
Dunkel=writeHelligkeit([0,0,0],[0,0,0],False)
File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linuxSupport/plugin.py", line 72, in writeHelligkeit
updateBrightness(int(hell), g_min, g_max)
TypeError: int() argument must be a string or a number, not 'list'
------------------------------------------------------------
(exit code 5)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Vu+ Duo2, Dreambox DM8000HD, Gibertini OS150 + H-2-H Jaeger SMR-1224 + VBox II, WaveFrontier T90.
Posted 1 August 2014 - 02:07
Heb net ook de update gedaan maar hier loopt die dus niet vast op vox SD... HD heb ik geen beeld op (heb geen kaart daarvoor) maar loopt ook niet vast..
Misschien een corrupte epg.dat ?
Of iets met hbbtv want die heb ik er niet op staan..
Heb ook de Vu Ultimo...
Gebruik de gewone pli skin hd en heb er geen andere plugins opstaan als alleen cccam en interne harddisk van 2 TB.
Edited by Lemmingsbeest, 1 August 2014 - 02:09.
Posted 1 August 2014 - 08:20
De vastloper komt uit de LCD4Linux plugin, dit zat er een hele tijd geleden ook al eens in, ik dacht dat dit in latere versies opgelost is, hoe oud is de versie die je op je Duo2 hebt staan?
File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 12110, in autostart Dunkel=writeHelligkeit([0,0,0],[0,0,0],False) File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linuxSupport/plugin.py", line 72, in writeHelligkeit updateBrightness(int(hell), g_min, g_max)
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message 
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 1 August 2014 - 08:23
Je zou via opkg de versie even eraf kunnen halen, of de betreffende regel 12110 van /usr/lib/enigma2/python/Plugins/Extensions/LCD4linuxSupport/plugin.py ,welke de crash veroorzaakt even te editten door voor de regel met een # te laten beginnen.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 1 August 2014 - 09:03
Ik hoor meer klachten over de lcd4linux plugin. Ik heb zelf nergens last van, maar ik heb wel een vermoeden. Tijdens mijn vakantie is er op de een of andere manier een andere versie in onze 3rd party feeds terechtgekomen en die staat nu kennelijk bij iedereen geinstalleerd. En kennelijk wordt die ook niet geupdate met de nu juiste versie. Advies: lcd4linux even helemaal verwijderen en opnieuw installeren, dat schijnt het op te lossen.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 1 August 2014 - 11:57
Het kan LCD4linuxSupport de plugin is niet geïnstalleerd! Verwijder deze dan.
http://openpli.org/f...ndpost&p=436449 en Post #7
Edited by joergm6, 1 August 2014 - 12:00.
Posted 1 August 2014 - 12:01
Openpli 4, kernel 3.3.8, Enigma 2014-07-30 (voor onderstaande acties).
'opkg remove lcd4linux' verwijderde alleen de init.d scripts, 'opkg install lcd4linux' geeft (na een reboot) een Unknown package 'lcd4linux'.
Software update via Enigma gaf aan 22 packages to update, hierna weer groen scherm en komt nu bij opstarten Enigma boot loop.
Nu dus erger geworden (na # voor line 270 in BQY.py wel weer beeld).
setting frontend 2
(2)fe event: status 0, inversion off, m_tuning 1
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
nameservers: [[8, 8, 8, 8], [10, 1, 8, 11]]
read configured interface: {'lo': {'dhcp': False}, 'ra0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'ra0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:00:00:00:00:00', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'mac': '00:1d:ec:05:e0:64', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
AT plugin not found
ER plugin not found
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Components/Console.py", line 56, in finishedCB
File "/usr/lib/enigma2/python/Components/Network.py", line 131, in routeFinished
File "/usr/lib/enigma2/python/Components/Network.py", line 226, in loadNetworkConfig
File "/usr/lib/enigma2/python/Components/Network.py", line 682, in msgPlugins
File "/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/plugin.py", line 146, in IfUpIfDown
HttpdStart(global_session)
File "/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/httpserver.py", line 125, in HttpdStart
root = buildRootTree(session)
File "/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/httpserver.py", line 49, in buildRootTree
root = RootController(session)
File "/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/root.py", line 48, in __init__
self.putChild("bouqueteditor", BQEController(session))
File "/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/BQE.py", line 270, in __init__
self.putChild('tmp', File('/tmp'))
NameError: global name 'File' is not defined
(PyObject_CallObject(<Tools.BoundFunction.boundFunction instance at 0x1ae2328>,(1,)) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
Edited by justafriend, 1 August 2014 - 12:05.
Vu+ Duo2, Dreambox DM8000HD, Gibertini OS150 + H-2-H Jaeger SMR-1224 + VBox II, WaveFrontier T90.
Posted 1 August 2014 - 12:28
Doe eens het volgende:
- opkg list-installed | fgrep lcd4linux
- alle packages die je ziet verwijderen
- opkg update
- opkg install enigma2-plugin-extensions-lcd4linux
Of anders even opnieuw flashen.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 1 August 2014 - 13:31
- opkg list-installed | fgrep lcd4linux
- alle packages die je ziet verwijderen
- opkg update
- opkg install enigma2-plugin-extensions-lcd4linux
enigma2-plugin-extensions-lcd4linuxsupport was het 2e package geinstalleerd was, na deinstallatie is het lcd4lunix probleem opgelost (blijkbaar was het support package voor een oudere versie). Probleem van
File "/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/BQE.py", line 270, in __init__
self.putChild('tmp', File('/tmp'))
NameError: global name 'File' is not defined
is nog niet opgelost, moet nog een # voor. Dit kwam dus door de update van vandaag, dat zat nog niet in de update van gisteren.
Heb nog niet een nieuwe image geflashed, kom ik vandaag denk ik niet meer aan toe.
Vu+ Duo2, Dreambox DM8000HD, Gibertini OS150 + H-2-H Jaeger SMR-1224 + VBox II, WaveFrontier T90.
Posted 1 August 2014 - 14:20
deinstallatie
...en herinstallatie van enigma2-plugin-extensions-lcd4linux
Edited by justafriend, 1 August 2014 - 14:20.
Vu+ Duo2, Dreambox DM8000HD, Gibertini OS150 + H-2-H Jaeger SMR-1224 + VBox II, WaveFrontier T90.
Posted 1 August 2014 - 14:21
ile "/usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/BQE.py", line 270, in __init__
self.putChild('tmp', File('/tmp'))
NameError: global name 'File' is not defined
Dit is weer wat anders, dit gaat over de OpenWebIf, ofwel de webinterface die via poort 80 op de box is te bereiken..
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 2 August 2014 - 13:54
Ik heb hier het zelfde probleem met de Duitser HD zenders zodra ik da op ga staan start de box opnieuw op. Verwijder ik HBBtv dan werken deze zenders gewoon.
et Channel Info >> sid : 0, onid : 0, tsid : 0, name : , orgid : 0
[LCD4linux] RunTime: 0.168 (Picture: 0.076 / Write: 0.093)
[LCD4linux] Done Worker Pic 0
[EPGC] start caching events(1406983749)
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Navigation.py", line 51, in dispatchEvent
File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 80, in event
File "/usr/lib/enigma2/python/Plugins/Extensions/HbbTV/plugin.py", line 1012, in _cb_detectedAIT
name = self._cb_ready_for_ait()
File "/usr/lib/enigma2/python/Plugins/Extensions/HbbTV/plugin.py", line 1050, in _cb_ready_for_ait
if reader.doOpen(info, self.mVuplusBox):
File "/usr/lib/enigma2/python/Plugins/Extensions/HbbTV/aitreader.py", line 76, in doOpen
self.mDocument = xml.dom.minidom.parseString(document)
File "/usr/lib/python2.7/xml/dom/minidom.py", line 1930, in parseString
File "/usr/lib/python2.7/xml/dom/expatbuilder.py", line 940, in parseString
File "/usr/lib/python2.7/xml/dom/expatbuilder.py", line 223, in parseString
xml.parsers.expat.ExpatError: not well-formed (invalid token): line 7, column 38
(PyObject_CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation instance at 0x1c1e260>>,(20,)) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Ik heb het zonet nog een keer weer geprobeerdt naar installatie van HBBtv crash de box op Duitser HD zenders Ned doet het gewoon.
Posted 2 August 2014 - 15:30
Is er dan weer iets aan de HbbTV van die kanalen gewijzigd?
Overigens is Duitse HD kanalen wel een enorm ruim begrip, bedoel je daar die 'HD reclame' (HD+) kanalen mee?
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 2 August 2014 - 17:44
Ja ik heb het getest op de HD+ kanalen de eerste paar seconden beeld en dan gaat hij crashen en rebooten.
Posted 2 August 2014 - 18:19
(Mede) Vandaar waarschijnlijk de recente reeks van updates van de VU+ HbbTV plugin.
Posted 3 August 2014 - 08:01
Zou zomaar kunnen dat ze 'vergeten' zijn een fix van een aantal maanden geleden, vergeten zijn mee te nemen.
Hotbird, gebruik je toevallig ook nog web-streams in je kanalenlijst? BIj eerdere problemen met HbbTV bleek dat die niet de lange verwijzingen in de streams overweg kon.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 3 August 2014 - 08:07
Hotbird, gebruik je toevallig ook nog web-streams in je kanalenlijst? BIj eerdere problemen met HbbTV bleek dat die niet de lange verwijzingen in de streams overweg kon.
Dat was bij Xtrend (bij de introductie van hun nieuwe HbbTV plugin), niet bij VU.
Edited by SatKiekerd, 3 August 2014 - 08:08.
0 members, 4 guests, 0 anonymous users
