101 replies to this topic

[Erik Slagter]

That's not quite the same as "recording IPTV" (from the STB). I repeat again for ozzsurf, you cannot record 4097 services, full stop. And most IPTV services are of the 4097 type.

[ozzsurf]

never said you can record 4097 to stb

i said you can record http  with 1:0:1:1:0:0:0:0:0:0: to stb

and you can record http with wget to stb

 

and then fool the box with vlc to think a rtmp stream is a http stream

 

no stream is 4097 unless you write that yourself

if its a http stream then put 1:0:1:1:0:0:0:0:0:0:

or use wget

 

if its a rtmp stream then use vlc to record to vu hdd

 

 

 

what you said was you cant record iptv to stb

then you said you can because of new drivers

 

when infact you have been able to record iptv to stb for years

with any old drivers

 

here is what you said
IPTV as in media from internet: no STB can record that
IPTV as in remote enigma tuner: no VU+ stb can record that.

Edited by ozzsurf, 13 January 2015 - 16:49.

[ozzsurf]

and i will show how to play simpletv url links on enigma2

from solo2 mediaplayer

 

i will write later

[ozzsurf]

how to play SimpleTv links on your enigma2 box

the url link below and is a example and is dead

find a working SimpleTv link

 

then

you need to add the links to a file called

playlist.e2pls

ftp to your box
navigate to /etc/enigma2/playlist.e2pls

now get you SimpleTv link that looks like this


 

rtmp://$OPT:rtmp-raw=rtmpe://46.246.124.6:1935/redirect playpath=BST1 swfUrl=http://www.udemy.com/static/flash/player5.9.swf live=1 pageUrl=http://www.hdcast.org/

delete this
rtmp://$OPT:rtmp-raw=

you can shorten the link to this

 

rtmpe://46.246.124.6:1935/redirect/BST1 live=1 pageUrl=http://www.hdcast.org

add 4097:0:0:0:0:0:0:0:0:0: to start of url

now looks like this

 

4097:0:0:0:0:0:0:0:0:0:rtmpe://46.246.124.6:1935/redirect/BST1 live=1 pageUrl=http://www.hdcast.org

now you need to replace : with %3a only in the address

now looks like this

 

4097:0:0:0:0:0:0:0:0:0:rtmpe%3a//46.246.124.6%3a1935/redirect/BST1 live=1 pageUrl=http%3a//www.hdcast.org

if you want to name the stream add at the end :BEIN SPORTS 1

complete url looks like this

 

4097:0:0:0:0:0:0:0:0:0:rtmpe%3a//46.246.124.6%3a1935/redirect/BST1 live=1 pageUrl=http%3a//www.hdcast.org:BEIN SPORTS 1

save it in
playlist.e2pls

go to your mediaplayer plugin
then press menu switch to playlist

and play SimpleTv links on your enigma2 box

easy.

Edited by ozzsurf, 13 January 2015 - 17:14.

[Erik Slagter]

ozzsurf, you claim that I say you can't record IPtv and that is not true. So once again:

 

- 1:0:1 are dvb streams and can be recorded (just like any dvb program), and this is also possible on VU+, now with the new BSP/drivers from december 2014

- 4097:0:1 are "gstreamer" streams which can't be recorded

 

Most IPtv streams are 4097 (and you cannot choose that yourself) and can't be recorded.

 

I sincerely hope this is the last time I have to explain this.

[ozzsurf]

ok you think what you like

[WanWizard]

@Erik,

 

He is using VLC to transcode into a stream the box does understand. So that way you can "claim" the box can record anything.

It could record your incoming emails if you found a way to transcode them into a DVB stream....

 

Also, one of the screenshots showed "instant recording", which from a technical point of view is timeshifting, not recording. And I believe both are handled differently by Enigma.

[ozzsurf]

rtmp or 4097 whatever you want to call it

wont record you will get a error if you try to record rtmp

 

 

http will record if you put this 1:0:1:1:0:0:0:0:0:0:

 

so if you play a rtmp 4097 link in vlc

and send that link to your box

that link is now coming from a http link ie the pc 192.168.x.x

now the box will record it as it is a http link

thats why it records

 

now im working on a way of combining 2 urls in enigma2

one to view rtmp 4097 from one file then send that to another file on enigma2

as a http link so it will record rtmp 4097 thus cutting out vlc

all will be done on the vu

Edited by ozzsurf, 13 January 2015 - 20:24.

[Erik Slagter]

Also, one of the screenshots showed "instant recording", which from a technical point of view is timeshifting, not recording. And I believe both are handled differently by Enigma.

It doesn't matter, gstreamer services cannot be recorded, streamed, timeshifted or "instant" recorded. Recording is currently implemented as simply fetching data from the demuxer, and the demuxer only understands DVB streams (mpeg transport streams).

 

With wget I can also "record" anything, I don't even need a STB for that. But that's not the STB nor enigma2 doing the job.

[ozzsurf]

right this is how far i have got

put a RTMP link in

/etc/enigma2/playlist.e2pls

the link is written like this
and it plays ok via mediaplayer plugin but it cant record as its 4097 RTMP link
 

4097:0:1:0:0:0:0:0:0:0:rtmp%3a//mi2.gv.filmon.com%3a8086/live/206.high.stream:filmon

then ftp to

/etc/enigma2/userbouquet.favourites.tv

we need to write a http link to
/etc/enigma2/playlist.e2pls

like this

 

#SERVICE 1:0:1:1:0:0:0:0:0:0:http%3a//192.168.1.4/etc/enigma2/playlist.e2pls
#DESCRIPTION MY STREAM

to activate the filmon link in playlist.e2pls


by going to

favourites.tv
in the channel list and selecting MY STREAM

then that rtmp stream will record as a ts
the box thinking its a http link


heres the problem how to write this line so it reads whats in playlist.e2pls

#SERVICE 1:0:1:1:0:0:0:0:0:0:http%3a//192.168.1.4/etc/enigma2/playlist.e2pls

Edited by ozzsurf, 13 January 2015 - 21:57.

[ozzsurf]

ozzsurf, you claim that I say you can't record IPtv and that is not true. So once again:

 

- 1:0:1 are dvb streams and can be recorded (just like any dvb program), and this is also possible on VU+, now with the new BSP/drivers from december 2014

 

i installed this image on 13/02/2014

i am using old drivers date 24/12/2013

 

and im am using a vu+ solo2

 

and i can record 1:0:1:1:0:0:0:0:0:0

 

with these very old drivers

 

1 told you the drivers have nowt to do with it  (SEE PIC)

 

and stop saying 4097 cant be recorded  I KNOW THAT

Attached Files

•  old drivers.jpg   62.63KB   3 downloads

Edited by ozzsurf, 14 January 2015 - 22:21.

[athoik]

Can you record 4097 WITHOUT vlc? NO...

[ozzsurf]

Can you record 4097 WITHOUT vlc? NO...

i never said i could record 4097 WITHOUT vlc

so your point is

 

 

my point to mr you cant do this and you cant do that is

 

you can record 1:0:1:1:0:0:0:0:0:0

 

with drivers from years ago as the pic says

Edited by ozzsurf, 14 January 2015 - 22:33.

[ozzsurf]

and if you care to look at post 50

i am trying to sort out a work around so 4097 can be recorded WITHOUT vlc

 

with all the so called brains here

i thought i might get a bit of help with that

 

all can you can say is you cant do that

 

guess your not so brainy after all

lol 

Edited by ozzsurf, 14 January 2015 - 22:58.

[smc]

Dear sirs,

 

I am very new to this theme, I am since recently the proud owner of a used ET9000 but have no knowledge yet how to get to grips with all the details involved. I'm an elderly person who thusfar had only regular sat receivers without any kind of internet interlacement whatsoever. Jus FTA channels and what my CanalDigitaal card gives me.

 

I was very thrilled to find out that there are such things as streams, IPTV and webcams in my very long list of favourites, especially when I found out that some of them contained public tv channels from some countries of which languages I speak.

 

And yes, I too was most interested to find out if I could record some of these streams, for instance M1, the Moldavian 1st national programme. I speak Romanian but not so excellently that I can understand every word immediately so being able to record and re-view a news broadcast.

 

From what I understand from the above discussion seems that it is possible to record stch streams but that one has to do this using vlc, a program that has been installed on my computer for at least 10 years. I recognize that there apparently is a purist discussion whether or not decoding via vlc (= via the computer???) may be considered to be decoding of the stream, but from a practical point of view I hope you may understand that for me the only thing that matters is the question if I can record in order to see again something like a news program that came via stream or IPTV.

 

Please accept my apologies for this lengthty bit of writing; my question is quite short: could you perhaps give me a "stream record for Dummies"-instruction how I may record something like a news broadcast that comes via a stream or IPTV from the favorites list? Because as a total newbe I am totally unable to understand the technical things that have been said in this thread...

 

I would be most grateful, thanks very much!

[ozzsurf]

Can you record 4097 WITHOUT vlc? NO...

 

 

yes i can lol

 

rtmp downloading to /hdd

 

all from within vu solo2

no vlc

 

vu+ can now record rtmp to /hdd

 

i knew it could be done

 

and its done lol

Attached Files

•  shot1.jpg   60.44KB   12 downloads
•  filmon rtmp.jpg   113.83KB   10 downloads

[malakudi]

@ozzsurf: You seem to have a problem with English language. Recording IPTV from STB means: I have some IPTV streams in a bouquet, I press "record" in my remote and they are recorded. That's it! And this works only with MPEG-TS streams over HTTP with well defined structure.

 

All others (wget, vlc, external plugins, download managers etc) are not "Recording IPTV ftom STB".

[ozzsurf]

not another one

saying you cant do it

 

Recording IPTV from STB means just that recording

they dont need to be in a bouquet

to record as i have shown

 

and i have no problem with English language

 

i have a problem with guys like you telling me i cant do something

 

 

 

press "record" in my remote and they are recorded

 

what do you think i am doing when i want to record

 

i am pushing a button on the remote doh!

 

 

 

the fact is you can now record rtmp with a vu sat box

all from within that box no other hardware is needed

 

 

so understand that

 

and be told

 

experts i'v e $hit em

[ozzsurf]

 

 

All others (wget, vlc, external plugins, download managers etc) are not "Recording IPTV ftom STB".

 

 

what that then  in pic then

Attached Files

•  what lol.jpg   50.08KB   9 downloads

[malakudi]

No, you keep not understanding. Setting up an environment with a PC, VLC etc is NOT "recording by pressing a key in the remote". And recording via wget is also NOT "recording by pressing a key in the remote".