Jump to content


Photo

Waar vind ik smartmontools?


  • Please log in to reply
14 replies to this topic

#1 pameijer

  • Senior Member
  • 122 posts

+3
Neutral

Posted 10 September 2014 - 22:23

Ik vrees dat mij HD het aan het begeven is in mijn Vu+ Ultimo. Nu lees ik op dit forum her en der dat ik smartmontools moet installeren en dat die al in 2011 aan de feed zijn toegevoegd. Ik kan ze alleen nergens vinden, niet bij de plugins, niet bij softwarebeheer. Hoe krijg ik smt op mijn decoder zodat ik smartctl kan uitvoeren?l



Re: Waar vind ik smartmontools? #2 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,242 posts

+160
Excellent

Posted 11 September 2014 - 08:07

onder telnet type

 

opkg install smartmontools


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OScam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: Waar vind ik smartmontools? #3 pameijer

  • Senior Member
  • 122 posts

+3
Neutral

Posted 11 September 2014 - 22:22

Thanks, that worked! Why is it no longer in the feed?



Re: Waar vind ik smartmontools? #4 pameijer

  • Senior Member
  • 122 posts

+3
Neutral

Posted 11 September 2014 - 22:35

Ga ik opeens engels l*llen..., forumdeformatie  :P

 

Moet ik me trouwens zorgen maken met deze uitkomst:

 


root@vuultimo:~# smartctl -a /dev/sda1

smartctl 5.42 2011-10-20 r3458 [mips-linux-3.1.1] (local build)

Copyright © 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

 

=== START OF INFORMATION SECTION ===

Model Family:     Western Digital Caviar Green (Adv. Format)

Device Model:     WDC WD10EARX-00N0YB0

Serial Number:    WD-WMC0S0345553

LU WWN Device Id: 5 0014ee 2b1474134

Firmware Version: 51.0AB51

User Capacity:    1,000,204,886,016 bytes [1.00 TB]

Sector Sizes:     512 bytes logical, 4096 bytes physical

Device is:        In smartctl database [for details use: -P show]

ATA Version is:   8

ATA Standard is:  Exact ATA specification draft version not indicated

Local Time is:    Thu Sep 11 23:38:21 2014 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status:  (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status:      (   0) The previous self-test routine completed

without error or no self-test has ever 

been run.

Total time to complete Offline 

data collection: (19800) seconds.

Offline data collection

capabilities:  (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine 

recommended polling time:  (   2) minutes.

Extended self-test routine

recommended polling time:  ( 193) minutes.

Conveyance self-test routine

recommended polling time:  (   5) minutes.

SCT capabilities:        (0x30b5) SCT Status supported.

SCT Feature Control supported.

SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0

  3 Spin_Up_Time            0x0027   123   111   021    Pre-fail  Always       -       6833

  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2977

  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0

  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0

  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       6969

 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0

 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0

 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1700

192 Power-Off_Retract_Count 0x0032   198   198   000    Old_age   Always       -       1688

193 Load_Cycle_Count        0x0032   196   196   000    Old_age   Always       -       12529

194 Temperature_Celsius     0x0022   111   088   000    Old_age   Always       -       36

196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0

197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0

198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0

199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0

200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

No self-tests have been logged.  [To run self-tests, use: smartctl -t]

 

 

SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 


Edited by pameijer, 11 September 2014 - 22:39.


Re: Waar vind ik smartmontools? #5 pameijer

  • Senior Member
  • 122 posts

+3
Neutral

Posted 12 September 2014 - 06:46

Vannacht maar even de de longrun test gedaan. Resultaat na deze test:

 

root@vuultimo:~# smartctl -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.1.1] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (Adv. Format)
Device Model:     WDC WD10EARX-00N0YB0
Serial Number:    WD-WMC0S0345553
LU WWN Device Id: 5 0014ee 2b1474134
Firmware Version: 51.0AB51
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Sep 12 07:34:28 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(19800) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 193) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x30b5)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   122   111   021    Pre-fail  Always       -       6900
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2978
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       6977
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1700
192 Power-Off_Retract_Count 0x0032   198   198   000    Old_age   Always       -       1688
193 Load_Cycle_Count        0x0032   196   196   000    Old_age   Always       -       12531
194 Temperature_Celsius     0x0022   101   088   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      6972         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Dit lijkt mij verder goed?



Re: Waar vind ik smartmontools? #6 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,242 posts

+160
Excellent

Posted 12 September 2014 - 07:00

Prima schijf ;) eigenlijk zou iedereen dit regelmatig moeten doen.

Edited by 40H3X, 12 September 2014 - 07:02.

Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OScam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: Waar vind ik smartmontools? #7 pameijer

  • Senior Member
  • 122 posts

+3
Neutral

Posted 12 September 2014 - 07:38

Dat hoopte ik al, maar ga toch maar even een backup maken van alle waardevolle opnames naar de NAS. Er is dus een andere reden dat mijn Ultimo met OpenPLI 4 en amper plugins retetraag is geworden, afsluiten duurt soms meer dan 5 minuten.... Gevalletje reinstall waarschijnlijk.



Re: Waar vind ik smartmontools? #8 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,242 posts

+160
Excellent

Posted 12 September 2014 - 08:36

Een backup maken met de BackupSuite, dan een frisse flash, liefst zonder reinstall van de autobackup en kijken of het wat uitmaakt.. Met de BackupSuite kun altijd terug naar de situatie van vandaag (is het nog de vraag waar de traagheid vandaan komt).


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OScam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: Waar vind ik smartmontools? #9 teo1966

  • Senior Member
  • 1,012 posts

+9
Neutral

Posted 12 September 2014 - 09:18

Thanks, that worked! Why is it no longer in the feed?


Dank je wel , dat werkt Waarom is het niet langer in de feed ?

VU+ULTIMO4K/HD11/HD530C/HD51 openpli 8.1


Re: Waar vind ik smartmontools? #10 Erik Slagter

  • PLi® Core member
  • 46,802 posts

+539
Excellent

Posted 12 September 2014 - 09:22

Vannacht maar even de de longrun test gedaan. Resultaat na deze test:

root@vuultimo:~# smartctl -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.1.1] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
...


Dit is precies hoe de output van smartctl er uit zou moeten zien na een selftest, voor referentie dus ;)
* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Waar vind ik smartmontools? #11 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,242 posts

+160
Excellent

Posted 12 September 2014 - 10:36


Dank je wel , dat werkt Waarom is het niet langer in de feed ?

 

ZIe ook de discussie hieronder, ik kan me voorstellen dat als "de horde", om het met een telnet regel te downloaden en installeren, niet te nemen is, je er IMHO überhaupt niet aan moet beginnen ;).

 

http://openpli.org/f...ctl#entry441095


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OScam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: Waar vind ik smartmontools? #12 teo1966

  • Senior Member
  • 1,012 posts

+9
Neutral

Posted 12 September 2014 - 11:18

Klopt je hebt helemaal gelijk als je niet weet wat telnet is niet aan beginnen

VU+ULTIMO4K/HD11/HD530C/HD51 openpli 8.1


Re: Waar vind ik smartmontools? #13 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,242 posts

+160
Excellent

Posted 12 September 2014 - 11:29

Overigens is er wel een GUI (grafische) oplossing in PLi namelijk Menu-> Instellingen-Systeem-Hardisk-Bestandssysteemcontrole


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OScam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: Waar vind ik smartmontools? #14 Erik Slagter

  • PLi® Core member
  • 46,802 posts

+539
Excellent

Posted 12 September 2014 - 16:56

ZIe ook de discussie hieronder, ik kan me voorstellen dat als "de horde", om het met een telnet regel te downloaden en installeren, niet te nemen is, je er IMHO überhaupt niet aan moet beginnen ;).

Alternatief is gewoon maar afwachten wanneer de disk stuk is gegaan en dan alles kwijt zijn.

Ik vind het net zoiets als "mijn wlan (of "wiefie" noemen ze dat dan) hoeft niet beveiligd te zijn want ik begrijp niet hoe dat werkt". En dat ontslaat je dan meteen van alle verantwoordelijkheid, NOT.
* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Waar vind ik smartmontools? #15 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,242 posts

+160
Excellent

Posted 12 September 2014 - 21:17

ZIe ook de discussie hieronder, ik kan me voorstellen dat als "de horde", om het met een telnet regel te downloaden en installeren, niet te nemen is, je er IMHO überhaupt niet aan moet beginnen ;).

Alternatief is gewoon maar afwachten wanneer de disk stuk is gegaan en dan alles kwijt zijn.Ik vind het net zoiets als "mijn wlan (of "wiefie" noemen ze dat dan) hoeft niet beveiligd te zijn want ik begrijp niet hoe dat werkt". En dat ontslaat je dan meteen van alle verantwoordelijkheid, NOT.

Klopt, maar ik denk dat het gros het (helaas) zo ziet.
....ignorance is bliss ;)

Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OScam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users