Ik vrees dat mij HD het aan het begeven is in mijn Vu+ Ultimo. Nu lees ik op dit forum her en der dat ik smartmontools moet installeren en dat die al in 2011 aan de feed zijn toegevoegd. Ik kan ze alleen nergens vinden, niet bij de plugins, niet bij softwarebeheer. Hoe krijg ik smt op mijn decoder zodat ik smartctl kan uitvoeren?l
Waar vind ik smartmontools?
Started by pameijer, 10 Sep 2014 22:23
14 replies to this topic
Re: Waar vind ik smartmontools? #2
-
- Forum Moderator
PLi® Contributor - 5,957 posts
+191
Excellent
Posted 11 September 2014 - 08:07
onder telnet type
opkg install smartmontools
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: Waar vind ik smartmontools? #3
-
- Senior Member
- 122 posts
+3
Neutral
Posted 11 September 2014 - 22:22
Thanks, that worked! Why is it no longer in the feed?
Re: Waar vind ik smartmontools? #4
-
- Senior Member
- 122 posts
+3
Neutral
Posted 11 September 2014 - 22:35
Ga ik opeens engels l*llen..., forumdeformatie 
Moet ik me trouwens zorgen maken met deze uitkomst:
root@vuultimo:~# smartctl -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.1.1] (local build)
Copyright © 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (Adv. Format)
Device Model: WDC WD10EARX-00N0YB0
Serial Number: WD-WMC0S0345553
LU WWN Device Id: 5 0014ee 2b1474134
Firmware Version: 51.0AB51
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Sep 11 23:38:21 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 193) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x30b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 123 111 021 Pre-fail Always - 6833
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2977
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6969
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1700
192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1688
193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12529
194 Temperature_Celsius 0x0022 111 088 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Edited by pameijer, 11 September 2014 - 22:39.
Re: Waar vind ik smartmontools? #5
-
- Senior Member
- 122 posts
+3
Neutral
Posted 12 September 2014 - 06:46
Vannacht maar even de de longrun test gedaan. Resultaat na deze test:
root@vuultimo:~# smartctl -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.1.1] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (Adv. Format)
Device Model: WDC WD10EARX-00N0YB0
Serial Number: WD-WMC0S0345553
LU WWN Device Id: 5 0014ee 2b1474134
Firmware Version: 51.0AB51
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Sep 12 07:34:28 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 193) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x30b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 122 111 021 Pre-fail Always - 6900
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2978
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6977
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1700
192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1688
193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12531
194 Temperature_Celsius 0x0022 101 088 000 Old_age Always - 46
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6972 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Dit lijkt mij verder goed?
Re: Waar vind ik smartmontools? #6
-
- Forum Moderator
PLi® Contributor - 5,957 posts
+191
Excellent
Posted 12 September 2014 - 07:00
Prima schijf 
eigenlijk zou iedereen dit regelmatig moeten doen.
eigenlijk zou iedereen dit regelmatig moeten doen.
Edited by 40H3X, 12 September 2014 - 07:02.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: Waar vind ik smartmontools? #7
-
- Senior Member
- 122 posts
+3
Neutral
Posted 12 September 2014 - 07:38
Dat hoopte ik al, maar ga toch maar even een backup maken van alle waardevolle opnames naar de NAS. Er is dus een andere reden dat mijn Ultimo met OpenPLI 4 en amper plugins retetraag is geworden, afsluiten duurt soms meer dan 5 minuten.... Gevalletje reinstall waarschijnlijk.
Re: Waar vind ik smartmontools? #8
-
- Forum Moderator
PLi® Contributor - 5,957 posts
+191
Excellent
Posted 12 September 2014 - 08:36
Een backup maken met de BackupSuite, dan een frisse flash, liefst zonder reinstall van de autobackup en kijken of het wat uitmaakt.. Met de BackupSuite kun altijd terug naar de situatie van vandaag (is het nog de vraag waar de traagheid vandaan komt).
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: Waar vind ik smartmontools? #9
-
- Senior Member
- 1,112 posts
+10
Neutral
Posted 12 September 2014 - 09:18
Thanks, that worked! Why is it no longer in the feed?
Dank je wel , dat werkt Waarom is het niet langer in de feed ?
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Re: Waar vind ik smartmontools? #10
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 12 September 2014 - 09:22
Dit is precies hoe de output van smartctl er uit zou moeten zien na een selftest, voor referentie dusVannacht maar even de de longrun test gedaan. Resultaat na deze test:
root@vuultimo:~# smartctl -a /dev/sda1 smartctl 5.42 2011-10-20 r3458 [mips-linux-3.1.1] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net ...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Waar vind ik smartmontools? #11
-
- Forum Moderator
PLi® Contributor - 5,957 posts
+191
Excellent
Posted 12 September 2014 - 10:36
Dank je wel , dat werkt Waarom is het niet langer in de feed ?
ZIe ook de discussie hieronder, ik kan me voorstellen dat als "de horde", om het met een telnet regel te downloaden en installeren, niet te nemen is, je er IMHO überhaupt niet aan moet beginnen .
http://openpli.org/f...ctl#entry441095
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: Waar vind ik smartmontools? #12
-
- Senior Member
- 1,112 posts
+10
Neutral
Posted 12 September 2014 - 11:18
Klopt je hebt helemaal gelijk als je niet weet wat telnet is niet aan beginnen
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Re: Waar vind ik smartmontools? #13
-
- Forum Moderator
PLi® Contributor - 5,957 posts
+191
Excellent
Posted 12 September 2014 - 11:29
Overigens is er wel een GUI (grafische) oplossing in PLi namelijk Menu-> Instellingen-Systeem-Hardisk-Bestandssysteemcontrole
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: Waar vind ik smartmontools? #14
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 12 September 2014 - 16:56
Alternatief is gewoon maar afwachten wanneer de disk stuk is gegaan en dan alles kwijt zijn.ZIe ook de discussie hieronder, ik kan me voorstellen dat als "de horde", om het met een telnet regel te downloaden en installeren, niet te nemen is, je er IMHO überhaupt niet aan moet beginnen
Ik vind het net zoiets als "mijn wlan (of "wiefie" noemen ze dat dan) hoeft niet beveiligd te zijn want ik begrijp niet hoe dat werkt". En dat ontslaat je dan meteen van alle verantwoordelijkheid, NOT.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Waar vind ik smartmontools? #15
-
- Forum Moderator
PLi® Contributor - 5,957 posts
+191
Excellent
Posted 12 September 2014 - 21:17
Alternatief is gewoon maar afwachten wanneer de disk stuk is gegaan en dan alles kwijt zijn.Ik vind het net zoiets als "mijn wlan (of "wiefie" noemen ze dat dan) hoeft niet beveiligd te zijn want ik begrijp niet hoe dat werkt". En dat ontslaat je dan meteen van alle verantwoordelijkheid, NOT.ZIe ook de discussie hieronder, ik kan me voorstellen dat als "de horde", om het met een telnet regel te downloaden en installeren, niet te nemen is, je er IMHO überhaupt niet aan moet beginnen
Klopt, maar ik denk dat het gros het (helaas) zo ziet.
....ignorance is bliss
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
