8 replies to this topic

[lorum]

Hi,

Somebody can help me ?

I have two sattellites 4° W 5° W in one LNB, how can I setup the tuner.

I use 8 LNB with custome setup Disec 1.1, all the LNB works good except Amos 2 (4.0°).

Amos is setup in LNB 8 same as Eutelsat (5° W) this sattellite works fine, there are all the chanels, but any chanell for 4° W.

 

Lorum

[Robinson]

That is an interesting question. I doubt if I can help with a simple solution.

As a workaround, you may have to cheat your box and re-do your channel list so as to assign all your 4W channels to 5W satellite.

[littlesat]

You can select a satellite and then select the same LNB... via advanced tuner settings...

[Rob van der Does]

I have two sattellites 4° W 5° W in one LNB,

Does this LNB have an internal switch?
Or have you aligned one LNB as good as possible on both (so on 4.5W)?

Edited by SatKiekerd, 20 September 2014 - 15:19.

[Robinson]

Does this LNB have an internal switch?

Or have you aligned one LNB as good as possible on both (so on 4.5W)?

 

I'm not lorum but my understanding is the latter is the case.

[lorum]

I have a switch for 8 LNB, both sattellites are in the LNB 8, at 4.5°.

How ca I Edit the settings file ?

 

[Rob van der Does]

If it is one LNB (so pointing at 4.5W and no internal switch) simply do as LittelSat says: assign this LNB to both 4W & 5W.

[jpuigs]

This is the same case as EshailSat @ 25.5 E and BADR's @ 26 E.

And Express AM22 @ 53 E and Yahsat 1A @ 52.5 E

It sould be one way to "mix" two satellites into one. So no need to select two.

[Dimitrij]

Add one satellite 4W, frequency of the second satellite 5W,  to scan manually of 4W.