Posted 6 November 2014 - 19:59
And PAT?
(dvbsnoop 0x0)
just to make sure you're on the correct demux.
PAT is there, otherwise e2 would not have known about the PMT pid being 0x55.
So try with dvbsnoop -demux /dev/dvb/adapter0/demuxN 0x0 till you get some data.
Then try 0x55 on the same demux.
Posted 6 November 2014 - 20:09
Here you go:
root@xp1000:~# dvbsnoop -demux /dev/dvb/adapter0/demux0 0x0 dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/ ^C root@xp1000:~# dvbsnoop -demux /dev/dvb/adapter0/demux1 0x0 dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/ ^C root@xp1000:~# dvbsnoop -demux /dev/dvb/adapter0/demux2 0x0 dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/ ^C root@xp1000:~# dvbsnoop -demux /dev/dvb/adapter0/demux3 0x0 dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/ ^C root@xp1000:~# dvbsnoop -demux /dev/dvb/adapter0/demux4 0x0 dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/ Error(22): DMX_SET_FILTER failed: : Invalid argument root@xp1000:~# dvbsnoop -demux /dev/dvb/adapter0/demux5 0x0 dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/ ^C root@xp1000:~#
Only demux4 gave a response (the error), all others no output at all
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 November 2014 - 20:26
this is while e2 is receiving PAT? (before the PMT timeout error pops up)
Posted 6 November 2014 - 20:31
Yes.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 November 2014 - 21:18
I used VLC to dump the raw incoming stream. Maybe this will help?
raw-transcoded-stream.zip 1.94MB
7 downloads
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 November 2014 - 21:35
One more bit of information:
If I copy the captured ts file to my box, it plays via de filelist, but it doesn't seem to have a sound track at all.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 November 2014 - 21:39
There is one PAT section, and one PMT section.
PAT starts with 47 40 00 30, and PMT with 47 40 55 30
I think these should be repeated, if you would capture a longer fragment?
As e2 is able to find the PAT, I think it should be able to find the PMT as well...
Posted 6 November 2014 - 21:43
Larger capture.
Something else I noticed: the non-transcoded stream is SD and full screen here, when I play back the captured stream, it displays as a "poststamp", with black bars top/bottom and left/right.
raw-transcoded-stream-2.zip 6.65MB
7 downloads
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 November 2014 - 21:45
This one also doesn't have an audio track on the box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 November 2014 - 21:46
actually, the sections are not repeated.
So the issue is that the PMT section occurs before e2 starts the PMT filter.
I guess the PMT section should either be repeated, or delayed, in order for things to work with e2.
(vlc is not so picky, as it uses software demuxing)
Posted 6 November 2014 - 21:47
Where is this done? In the driver?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 November 2014 - 21:48
yes
Posted 6 November 2014 - 22:34
Ok. So that concludes our investigation, back to the manufacturer.
That also means this needs to be checked with all other boxes that support transcoding. Who has the option to test the VU's?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 November 2014 - 06:37
Devs - Big thanks for setting this in motion ...
Unfortunately the draw back is this story ends for me unexpectedly ..
As it seems to be a driver issue. vendors ( Xtrend and VU+) need to get involved in to this game.
I did not give up yet, so let's just hope the best out of it ...
MANY THANKS again debugging ! Highly appreciated
Posted 7 November 2014 - 08:44
There is more.
It seems that the transcoder of the 10K generates an AAC audio track in the transcoded stream. The XP1000 that I use as client can not play that back, so it's useless as a remote "transcoded" stream client... I assume there will be more boxes with this limitation.
The 10K itself plays the dumped files without problems.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 November 2014 - 09:17
Hmmmmm, so a generic option that can be implemented is still far away and even plausible.
Another strange thing to learn from this is the XP1000 cannot deal with AAC audio?!
Anyway still hope for the best ... thx again
Posted 7 November 2014 - 09:46
According to the specs, it should support both MPEG-2 AAC and MPEG-4 HE-AAC, so further investigation is needed.
If I play the dump on the XP1000, there is no audio, and a press on the yellow button reveals there are no audio tracks detected. If I play it on the ET10K, I have audio, and the yellow button shows an audio tracked named "AAC".
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 November 2014 - 09:09
Just curious what will happen next, based upon debugging results I deerly hope there will be a follow up to Xtrend ( and VU ).
Though not sure who is the intermediary from PLi and moreover will be any support given from their side ... thx
Edited by dolphs, 8 November 2014 - 09:09.
Posted 8 November 2014 - 09:19
We have been debugging since then. 
The above stream dumps will play on other boxes if you play it as a recording, but only once. Once the .meta file is created, there is no sound anymore. This is a cache issue in Enigma related to AAC audio, which we need to look at.
Also, sinds the stream itself plays, Enigma knows how to handle it. So we need to figure out why it does when Enigma gets it as a playback of a recording, but doesn't when Enigma gets it as a stream.
So it's too early to push this to the manufacturer, more work is needed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 3 guests, 0 anonymous users
