10 replies to this topic

[color86]

Hallo,

 

eigentlich bin ich seit langem ein Fan von OpenPLI aber ich kann seit kurzem kein update mehr machen.

Beim Start nach dem Update bleibt die Box beim Startbild "10 Years OpenPLI" hängen und nichts geht mehr.

 

Gibts hierfür eine Lösung?

 

Danke

[color86]

hier ein paar log files:

 

dmesg

 

Linux version 3.3.8-2.0 (build@buildserver) (gcc version 4.8.2 (GCC) ) #1 SMP Sat Feb 22 05:21:57 CET 2014

Fetching vars from bootloader... found 16 vars.

Options: moca=0 sata=1 pcie=0 usb=1

Using 1024 MB + 0 MB RAM (from CFE)

CPU revision is: 00025a11 (Brcm4380)

FPU revision is: 00130001

Determined physical RAM map:

 memory: 10000000 @ 00000000 (usable)

 memory: 30000000 @ 20000000 (usable)

bmem: adding 57 MB LINUX region at 6 MB (0x039b1000@0x0064f000)

bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)

bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)

bmem: adding 512 MB LINUX region at 768 MB (0x20000000@0x30000000)

Zone PFN ranges:

  Normal   0x00000000 -> 0x00050000

Movable zone start PFN for each node

Early memory PFN ranges

    0: 0x00000000 -> 0x00010000

    0: 0x00020000 -> 0x00050000

On node 0 totalpages: 262144

free_area_init_node: node 0, pgdat 805f3a00, node_mem_map 81000000

  Normal zone: 2560 pages used for memmap

  Normal zone: 0 pages reserved

  Normal zone: 259584 pages, LIFO batch:31

PERCPU: Embedded 7 pages/cpu @81a09000 s5632 r8192 d14848 u32768

pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096

pcpu-alloc: [0] 0 [0] 1 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259584

Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs

PID hash table entries: 4096 (order: 2, 16384 bytes)

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.

Primary data cache 32kB, 4-way, linesize 32 bytes.

MIPS secondary cache 256kB, 8-way, linesize 128 bytes.

Memory: 572236k/1048576k available (5210k kernel code, 476340k reserved, 950k data, 172k init, 0k highmem)

Hierarchical RCU implementation.

NR_IRQS:160

Measuring MIPS counter frequency...

Detected MIPS clock frequency: 1305 MHz (163.125 MHz counter)

Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

bcm40nm_pm_moca_disable 00

SMP: Booting CPU1...

CPU revision is: 00025a11 (Brcm4380)

FPU revision is: 00130001

Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.

Primary data cache 32kB, 4-way, linesize 32 bytes.

MIPS secondary cache 256kB, 8-way, linesize 128 bytes.

SMP: CPU1 is running

Brought up 2 CPUs

devtmpfs: initialized

NET: Registered protocol family 16

USB0: power enable is active high; overcurrent is active low

USB1: power enable is active high; overcurrent is active low

bio: create slab <bio-0> at 0

SCSI subsystem initialized

libata version 3.00 loaded.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Advanced Linux Sound Architecture Driver Version 1.0.24.

cfg80211: Calling CRDA to update world regulatory domain

Switching to clocksource wktmr

NET: Registered protocol family 2

IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

TCP: Hash tables configured (established 131072 bind 65536)

TCP reno registered

UDP hash table entries: 512 (order: 2, 16384 bytes)

UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

Installing knfsd (copyright © 1996 okir@monad.swb.de).

fuse init (API version 7.18)

msgmni has been set to 1117

io scheduler noop registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A

console [ttyS0] enabled

serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A

serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A

loop: module loaded

__clk_enable: sata [1]

bcm40nm_pm_sata_enable 00

ahci: SSS flag set, parallel bus scan disabled

ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

ahci strict-ahci.0: flags: ncq sntf stag clo slum part 

scsi0 : ahci_platform

scsi1 : ahci_platform

ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41

ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41

brcmstb_nand: NAND controller driver is loaded

__clk_enable: network [1]

__clk_enable: enet [1]

bcm40nm_pm_genet_enable 00

Found PHY at Address 3

Config GPHY through MDIO

__clk_disable: enet [0]

bcm40nm_pm_genet_disable 00

__clk_disable: network [0]

__clk_enable: network [1]

__clk_enable: moca_genet [1]

bcm40nm_pm_genet1_enable 00

__clk_enable: moca [1]

bcm40nm_pm_moca_enable 00

ata1: SATA link down (SStatus 0 SControl 300)

ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata2.00: ATA-8: WDC WD10JPVT-26A1YT0, 01.01A01, max UDMA/133

No PHY detected, not registering interface:1

__clk_disable: moca [0]

bcm40nm_pm_moca_disable 00

__clk_disable: moca_genet [0]

bcm40nm_pm_genet1_disable 00

__clk_disable: network [0]

bcmgenet: probe of bcmgenet.1 failed with error -5

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

__clk_enable: usb [1]

bcm40nm_pm_usb_enable 00

ehci-brcm ehci-brcm.0: Broadcom STB EHCI

ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1

ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)

ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300

ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00

ata2.00: configured for UDMA/133

scsi 1:0:0:0: Direct-Access     ATA      WDC WD10JPVT-26A 01.0 PQ: 0 ANSI: 5

sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

sd 1:0:0:0: [sda] 4096-byte physical blocks

sd 1:0:0:0: [sda] Write Protect is off

sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sd 1:0:0:0: Attached scsi generic sg0 type 0

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

ehci-brcm ehci-brcm.1: Broadcom STB EHCI

ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2

ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500

ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

ehci-brcm ehci-brcm.2: Broadcom STB EHCI

ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3

 sda: sda1

sd 1:0:0:0: [sda] Attached SCSI disk

ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300

ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 1 port detected

ehci-brcm ehci-brcm.3: Broadcom STB EHCI

ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4

ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500

ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 1 port detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

ohci-brcm ohci-brcm.0: Broadcom STB OHCI

ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5

ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400

hub 5-0:1.0: USB hub found

hub 5-0:1.0: 1 port detected

ohci-brcm ohci-brcm.1: Broadcom STB OHCI

ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6

ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600

hub 6-0:1.0: USB hub found

hub 6-0:1.0: 1 port detected

ohci-brcm ohci-brcm.2: Broadcom STB OHCI

ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7

ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400

hub 7-0:1.0: USB hub found

hub 7-0:1.0: 1 port detected

ohci-brcm ohci-brcm.3: Broadcom STB OHCI

ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8

ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600

hub 8-0:1.0: USB hub found

hub 8-0:1.0: 1 port detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

i2c /dev entries driver

lirc_dev: IR Remote Control driver registered, major 254 

IR NEC protocol handler initialized

IR RC5(x) protocol handler initialized

IR RC6 protocol handler initialized

IR JVC protocol handler initialized

IR Sony protocol handler initialized

IR RC5 (streamzap) protocol handler initialized

IR SANYO protocol handler initialized

IR MCE Keyboard/mouse protocol handler initialized

IR LIRC bridge handler initialized

Linux video capture interface: v2.00

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright© Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

ALSA device list:

  No soundcards found.

TCP cubic registered

NET: Registered protocol family 17

lib80211: common routines for IEEE802.11 drivers

lib80211_crypt: registered algorithm 'NULL'

Registering the dns_resolver key type

PM: CP0 COUNT/COMPARE frequency does not depend on divisor

EBI CS0: setting up NAND flash (primary)

NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)

brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC

Bad block table found at page 131008, version 0x01

Bad block table found at page 130944, version 0x01

nand_read_bbt: bad block at 0x000003080000

nand_read_bbt: bad block at 0x000005400000

nand_read_bbt: bad block at 0x000008120000

nand_read_bbt: bad block at 0x000009140000

nand_read_bbt: bad block at 0x00000ca60000

nand_read_bbt: bad block at 0x00000dec0000

Creating 4 MTD partitions on "brcmnand.0":

0x000001f00000-0x000010000000 : "rootfs"

0x000001f00000-0x000010000000 : "rootfs(redundant)"

0x000000200000-0x000000900000 : "kernel"

0x000000900000-0x000000a00000 : "mac"

UBI: attaching mtd0 to ubi0

UBI: physical eraseblock size:   131072 bytes (128 KiB)

UBI: logical eraseblock size:    126976 bytes

UBI: smallest flash I/O unit:    2048

UBI: VID header offset:          2048 (aligned 2048)

UBI: data offset:                4096

UBI: max. sequence number:       2998

UBI: attached mtd0 to ubi0

UBI: MTD device name:            "rootfs"

UBI: MTD device size:            225 MiB

UBI: number of good PEBs:        1790

UBI: number of bad PEBs:         10

UBI: number of corrupted PEBs:   0

UBI: max. allowed volumes:       128

UBI: wear-leveling threshold:    4096

UBI: number of internal volumes: 1

UBI: number of user volumes:     1

UBI: available PEBs:             0

UBI: total number of reserved PEBs: 1790

UBI: number of PEBs reserved for bad PEB handling: 17

UBI: max/mean erase counter: 117/75

UBI: image sequence number:  592932167

UBI: background thread "ubi_bgt0d" started, PID 44

UBIFS: parse sync

UBIFS: mounted UBI device 0, volume 0, name "rootfs"

UBIFS: file system size:   223223808 bytes (217992 KiB, 212 MiB, 1758 LEBs)

UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)

UBIFS: media format:       w4/r0 (latest is w4/r0)

UBIFS: default compressor: lzo

UBIFS: reserved for root:  0 bytes (0 KiB)

VFS: Mounted root (ubifs filesystem) on device 0:13.

devtmpfs: mounted

Freeing unused kernel memory: 172k freed

EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

procmk_init

dvb_bcm7356: module license 'Proprietary' taints kernel.

Disabling lock debugging due to kernel taint

DVB: registering new adapter (vusolo2)

bcm7356: hotplug_callback(): 

Hotplug - status.connected 1:0

bcm7356: hotplug_callback(): 

Hotplug - connecting HDMI to display 0xe

[GP]:brcm_pwm_init

 

brcm_demux_init: $Id: bcm_demux.c,v 0.7 $

[MPVR]: >> misc_pvr_init

[VID]: <6>bcm7335_video_init

[AUD]: <6>bcm7335_audio_init

DVB: registering adapter 0 frontend 0 (BCM7346 FE)...

DVB: registering adapter 0 frontend 0 (BCM7346 FE)...

input: dreambox advanced remote control (native) as /devices/virtual/input/input0

[LCD]: registered

0:0

[CI]: registered ci0

[DFP]: registered dbox fp

[DFP]: Scart 9597 is found 4

 

[SC]: registered sci0

BKNI_P_GetTrackAllocEntry_resize: resizing from 4096->8192

BKNI_Malloc(linuxkernel) top users:

    blocks,   bytes, filename:line

       960,  204528, ../BSEAV/lib/utils/balloc.c:35

       550,   22000, ../magnum/basemodules/mem/bmem_system.c:286

       380,   45600, magnum/commonutils/mrc/7346/bmrc_monitor.c:940

[SC]: registered sci1

system_time_set wakeup mode get 

system_time_set wakeup mode get 0xc4

fpga update driver loaded

[VID]: VIDEO_SET_STREAMTYPE 0 

[VID]: VIDEO_SELECT_SOURCE 1  

[VID]: VIDEO_PLAY 1  2 0

[VID]: VIDEO_CONTINUE 1  1 

[VID]: VIDEO_CLEAR_BUFFER 1  1 0

 

 

messages

 

Jan  1 01:00:12 vusolo2 syslog.info syslogd started: BusyBox v1.22.1

Jan  1 01:00:12 vusolo2 user.notice kernel: Linux version 3.3.8-2.0 (build@buildserver) (gcc version 4.8.2 (GCC) ) #1 SMP Sat Feb 22 05:21:57 CET 2014

Jan  1 01:00:12 vusolo2 user.info kernel: Fetching vars from bootloader... found 16 vars.

Jan  1 01:00:12 vusolo2 user.info kernel: Options: moca=0 sata=1 pcie=0 usb=1

Jan  1 01:00:12 vusolo2 user.info kernel: Using 1024 MB + 0 MB RAM (from CFE)

Jan  1 01:00:12 vusolo2 user.info kernel: CPU revision is: 00025a11 (Brcm4380)

Jan  1 01:00:12 vusolo2 user.info kernel: FPU revision is: 00130001

Jan  1 01:00:12 vusolo2 user.info kernel: Determined physical RAM map:

Jan  1 01:00:12 vusolo2 user.info kernel:  memory: 10000000 @ 00000000 (usable)

Jan  1 01:00:12 vusolo2 user.info kernel:  memory: 30000000 @ 20000000 (usable)

Jan  1 01:00:12 vusolo2 user.debug kernel: bmem: adding 57 MB LINUX region at 6 MB (0x039b1000@0x0064f000)

Jan  1 01:00:12 vusolo2 user.info kernel: bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)

Jan  1 01:00:12 vusolo2 user.info kernel: bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)

Jan  1 01:00:12 vusolo2 user.debug kernel: bmem: adding 512 MB LINUX region at 768 MB (0x20000000@0x30000000)

Jan  1 01:00:12 vusolo2 user.warn kernel: Zone PFN ranges:

Jan  1 01:00:12 vusolo2 user.warn kernel:   Normal   0x00000000 -> 0x00050000

Jan  1 01:00:12 vusolo2 user.warn kernel: Movable zone start PFN for each node

Jan  1 01:00:12 vusolo2 user.warn kernel: Early memory PFN ranges

Jan  1 01:00:12 vusolo2 user.warn kernel:     0: 0x00000000 -> 0x00010000

Jan  1 01:00:12 vusolo2 user.warn kernel:     0: 0x00020000 -> 0x00050000

Jan  1 01:00:12 vusolo2 user.debug kernel: On node 0 totalpages: 262144

Jan  1 01:00:12 vusolo2 user.debug kernel: free_area_init_node: node 0, pgdat 805f3a00, node_mem_map 81000000

Jan  1 01:00:12 vusolo2 user.debug kernel:   Normal zone: 2560 pages used for memmap

Jan  1 01:00:12 vusolo2 user.debug kernel:   Normal zone: 0 pages reserved

Jan  1 01:00:12 vusolo2 user.debug kernel:   Normal zone: 259584 pages, LIFO batch:31

Jan  1 01:00:12 vusolo2 user.info kernel: PERCPU: Embedded 7 pages/cpu @81a09000 s5632 r8192 d14848 u32768

Jan  1 01:00:12 vusolo2 user.debug kernel: pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096

Jan  1 01:00:12 vusolo2 user.debug kernel: pcpu-alloc: [0] 0 [0] 1 

Jan  1 01:00:12 vusolo2 user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259584

Jan  1 01:00:12 vusolo2 user.notice kernel: Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs

Jan  1 01:00:12 vusolo2 user.info kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)

Jan  1 01:00:12 vusolo2 user.info kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Jan  1 01:00:12 vusolo2 user.info kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Jan  1 01:00:12 vusolo2 user.warn kernel: Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.

Jan  1 01:00:12 vusolo2 user.warn kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.

Jan  1 01:00:12 vusolo2 user.warn kernel: MIPS secondary cache 256kB, 8-way, linesize 128 bytes.

Jan  1 01:00:12 vusolo2 user.info kernel: Memory: 572236k/1048576k available (5210k kernel code, 476340k reserved, 950k data, 172k init, 0k highmem)

Jan  1 01:00:12 vusolo2 user.info kernel: Hierarchical RCU implementation.

Jan  1 01:00:12 vusolo2 user.info kernel: NR_IRQS:160

Jan  1 01:00:12 vusolo2 user.info kernel: Measuring MIPS counter frequency...

Jan  1 01:00:12 vusolo2 user.info kernel: Detected MIPS clock frequency: 1305 MHz (163.125 MHz counter)

Jan  1 01:00:12 vusolo2 user.info kernel: Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)

Jan  1 01:00:12 vusolo2 user.info kernel: pid_max: default: 32768 minimum: 301

Jan  1 01:00:12 vusolo2 user.info kernel: Mount-cache hash table entries: 512

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_moca_disable 00

Jan  1 01:00:12 vusolo2 user.info kernel: SMP: Booting CPU1...

Jan  1 01:00:12 vusolo2 user.info kernel: CPU revision is: 00025a11 (Brcm4380)

Jan  1 01:00:12 vusolo2 user.info kernel: FPU revision is: 00130001

Jan  1 01:00:12 vusolo2 user.warn kernel: Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.

Jan  1 01:00:12 vusolo2 user.warn kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.

Jan  1 01:00:12 vusolo2 user.warn kernel: MIPS secondary cache 256kB, 8-way, linesize 128 bytes.

Jan  1 01:00:12 vusolo2 user.info kernel: SMP: CPU1 is running

Jan  1 01:00:12 vusolo2 user.info kernel: Brought up 2 CPUs

Jan  1 01:00:12 vusolo2 user.info kernel: devtmpfs: initialized

Jan  1 01:00:12 vusolo2 user.info kernel: NET: Registered protocol family 16

Jan  1 01:00:12 vusolo2 user.info kernel: USB0: power enable is active high; overcurrent is active low

Jan  1 01:00:12 vusolo2 user.info kernel: USB1: power enable is active high; overcurrent is active low

Jan  1 01:00:12 vusolo2 user.info kernel: bio: create slab <bio-0> at 0

Jan  1 01:00:12 vusolo2 user.notice kernel: SCSI subsystem initialized

Jan  1 01:00:12 vusolo2 user.debug kernel: libata version 3.00 loaded.

Jan  1 01:00:12 vusolo2 user.info kernel: usbcore: registered new interface driver usbfs

Jan  1 01:00:12 vusolo2 user.info kernel: usbcore: registered new interface driver hub

Jan  1 01:00:12 vusolo2 user.info kernel: usbcore: registered new device driver usb

Jan  1 01:00:12 vusolo2 user.info kernel: Advanced Linux Sound Architecture Driver Version 1.0.24.

Jan  1 01:00:12 vusolo2 user.info kernel: cfg80211: Calling CRDA to update world regulatory domain

Jan  1 01:00:12 vusolo2 user.info kernel: Switching to clocksource wktmr

Jan  1 01:00:12 vusolo2 user.info kernel: NET: Registered protocol family 2

Jan  1 01:00:12 vusolo2 user.info kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

Jan  1 01:00:12 vusolo2 user.info kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

Jan  1 01:00:12 vusolo2 user.info kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

Jan  1 01:00:12 vusolo2 user.info kernel: TCP: Hash tables configured (established 131072 bind 65536)

Jan  1 01:00:12 vusolo2 user.info kernel: TCP reno registered

Jan  1 01:00:12 vusolo2 user.info kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)

Jan  1 01:00:12 vusolo2 user.info kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

Jan  1 01:00:12 vusolo2 user.info kernel: NET: Registered protocol family 1

Jan  1 01:00:12 vusolo2 user.info kernel: RPC: Registered named UNIX socket transport module.

Jan  1 01:00:12 vusolo2 user.info kernel: RPC: Registered udp transport module.

Jan  1 01:00:12 vusolo2 user.info kernel: RPC: Registered tcp transport module.

Jan  1 01:00:12 vusolo2 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.

Jan  1 01:00:12 vusolo2 user.info kernel: Installing knfsd (copyright © 1996 okir@monad.swb.de).

Jan  1 01:00:12 vusolo2 user.info kernel: fuse init (API version 7.18)

Jan  1 01:00:12 vusolo2 user.info kernel: msgmni has been set to 1117

Jan  1 01:00:12 vusolo2 user.info kernel: io scheduler noop registered

Jan  1 01:00:12 vusolo2 user.info kernel: io scheduler cfq registered (default)

Jan  1 01:00:12 vusolo2 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

Jan  1 01:00:12 vusolo2 user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A

Jan  1 01:00:12 vusolo2 user.info kernel: console [ttyS0] enabled

Jan  1 01:00:12 vusolo2 user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A

Jan  1 01:00:12 vusolo2 user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A

Jan  1 01:00:12 vusolo2 user.info kernel: loop: module loaded

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: sata [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_sata_enable 00

Jan  1 01:00:12 vusolo2 user.info kernel: ahci: SSS flag set, parallel bus scan disabled

Jan  1 01:00:12 vusolo2 user.info kernel: ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

Jan  1 01:00:12 vusolo2 user.info kernel: ahci strict-ahci.0: flags: ncq sntf stag clo slum part 

Jan  1 01:00:12 vusolo2 user.info kernel: scsi0 : ahci_platform

Jan  1 01:00:12 vusolo2 user.info kernel: scsi1 : ahci_platform

Jan  1 01:00:12 vusolo2 user.info kernel: ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41

Jan  1 01:00:12 vusolo2 user.info kernel: ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41

Jan  1 01:00:12 vusolo2 user.info kernel: brcmstb_nand: NAND controller driver is loaded

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: network [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: enet [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_genet_enable 00

Jan  1 01:00:12 vusolo2 user.crit kernel: Found PHY at Address 3

Jan  1 01:00:12 vusolo2 user.info kernel: Config GPHY through MDIO

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_disable: enet [0]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_genet_disable 00

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_disable: network [0]

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: network [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: moca_genet [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_genet1_enable 00

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: moca [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_moca_enable 00

Jan  1 01:00:12 vusolo2 user.info kernel: ata1: SATA link down (SStatus 0 SControl 300)

Jan  1 01:00:12 vusolo2 user.info kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Jan  1 01:00:12 vusolo2 user.info kernel: ata2.00: ATA-8: WDC WD10JPVT-26A1YT0, 01.01A01, max UDMA/133

Jan  1 01:00:12 vusolo2 user.err kernel: No PHY detected, not registering interface:1

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_disable: moca [0]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_moca_disable 00

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_disable: moca_genet [0]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_genet1_disable 00

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_disable: network [0]

Jan  1 01:00:12 vusolo2 user.warn kernel: bcmgenet: probe of bcmgenet.1 failed with error -5

Jan  1 01:00:12 vusolo2 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: usb [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_usb_enable 00

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1

Jan  1 01:00:12 vusolo2 user.info kernel: ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00

Jan  1 01:00:12 vusolo2 user.info kernel: ata2.00: configured for UDMA/133

Jan  1 01:00:12 vusolo2 user.notice kernel: scsi 1:0:0:0: Direct-Access     ATA      WDC WD10JPVT-26A 01.0 PQ: 0 ANSI: 5

Jan  1 01:00:12 vusolo2 user.notice kernel: sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

Jan  1 01:00:12 vusolo2 user.notice kernel: sd 1:0:0:0: [sda] 4096-byte physical blocks

Jan  1 01:00:12 vusolo2 user.notice kernel: sd 1:0:0:0: [sda] Write Protect is off

Jan  1 01:00:12 vusolo2 user.debug kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

Jan  1 01:00:12 vusolo2 user.notice kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Jan  1 01:00:12 vusolo2 user.notice kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0

Jan  1 01:00:12 vusolo2 user.info kernel: hub 1-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 1-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00

Jan  1 01:00:12 vusolo2 user.info kernel: hub 2-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 2-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: Broadcom STB EHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3

Jan  1 01:00:12 vusolo2 user.info kernel:  sda: sda1

Jan  1 01:00:12 vusolo2 user.notice kernel: sd 1:0:0:0: [sda] Attached SCSI disk

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00

Jan  1 01:00:12 vusolo2 user.info kernel: hub 3-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 3-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: Broadcom STB EHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500

Jan  1 01:00:12 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00

Jan  1 01:00:12 vusolo2 user.info kernel: hub 4-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 4-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400

Jan  1 01:00:12 vusolo2 user.info kernel: hub 5-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 5-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600

Jan  1 01:00:12 vusolo2 user.info kernel: hub 6-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 6-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.2: Broadcom STB OHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400

Jan  1 01:00:12 vusolo2 user.info kernel: hub 7-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 7-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.3: Broadcom STB OHCI

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8

Jan  1 01:00:12 vusolo2 user.info kernel: ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600

Jan  1 01:00:12 vusolo2 user.info kernel: hub 8-0:1.0: USB hub found

Jan  1 01:00:12 vusolo2 user.info kernel: hub 8-0:1.0: 1 port detected

Jan  1 01:00:12 vusolo2 user.info kernel: Initializing USB Mass Storage driver...

Jan  1 01:00:12 vusolo2 user.info kernel: usbcore: registered new interface driver usb-storage

Jan  1 01:00:12 vusolo2 user.info kernel: USB Mass Storage support registered.

Jan  1 01:00:12 vusolo2 user.info kernel: i2c /dev entries driver

Jan  1 01:00:12 vusolo2 user.info kernel: lirc_dev: IR Remote Control driver registered, major 254 

Jan  1 01:00:12 vusolo2 user.info kernel: IR NEC protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR RC5(x) protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR RC6 protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR JVC protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR Sony protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR RC5 (streamzap) protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR SANYO protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR MCE Keyboard/mouse protocol handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: IR LIRC bridge handler initialized

Jan  1 01:00:12 vusolo2 user.info kernel: Linux video capture interface: v2.00

Jan  1 01:00:12 vusolo2 user.info kernel: sdhci: Secure Digital Host Controller Interface driver

Jan  1 01:00:12 vusolo2 user.info kernel: sdhci: Copyright© Pierre Ossman

Jan  1 01:00:12 vusolo2 user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper

Jan  1 01:00:12 vusolo2 user.info kernel: usbcore: registered new interface driver usbhid

Jan  1 01:00:12 vusolo2 user.info kernel: usbhid: USB HID core driver

Jan  1 01:00:12 vusolo2 user.info kernel: ALSA device list:

Jan  1 01:00:12 vusolo2 user.info kernel:   No soundcards found.

Jan  1 01:00:12 vusolo2 user.info kernel: TCP cubic registered

Jan  1 01:00:12 vusolo2 user.info kernel: NET: Registered protocol family 17

Jan  1 01:00:12 vusolo2 user.info kernel: lib80211: common routines for IEEE802.11 drivers

Jan  1 01:00:12 vusolo2 user.debug kernel: lib80211_crypt: registered algorithm 'NULL'

Jan  1 01:00:12 vusolo2 user.notice kernel: Registering the dns_resolver key type

Jan  1 01:00:12 vusolo2 user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor

Jan  1 01:00:12 vusolo2 user.info kernel: EBI CS0: setting up NAND flash (primary)

Jan  1 01:00:12 vusolo2 user.info kernel: NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)

Jan  1 01:00:12 vusolo2 user.info kernel: brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC

Jan  1 01:00:12 vusolo2 user.info kernel: Bad block table found at page 131008, version 0x01

Jan  1 01:00:12 vusolo2 user.info kernel: Bad block table found at page 130944, version 0x01

Jan  1 01:00:12 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000003080000

Jan  1 01:00:12 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000005400000

Jan  1 01:00:12 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000008120000

Jan  1 01:00:12 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000009140000

Jan  1 01:00:12 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x00000ca60000

Jan  1 01:00:12 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x00000dec0000

Jan  1 01:00:12 vusolo2 user.notice kernel: Creating 4 MTD partitions on "brcmnand.0":

Jan  1 01:00:12 vusolo2 user.notice kernel: 0x000001f00000-0x000010000000 : "rootfs"

Jan  1 01:00:12 vusolo2 user.notice kernel: 0x000001f00000-0x000010000000 : "rootfs(redundant)"

Jan  1 01:00:12 vusolo2 user.notice kernel: 0x000000200000-0x000000900000 : "kernel"

Jan  1 01:00:12 vusolo2 user.notice kernel: 0x000000900000-0x000000a00000 : "mac"

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: attaching mtd0 to ubi0

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: physical eraseblock size:   131072 bytes (128 KiB)

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: logical eraseblock size:    126976 bytes

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: smallest flash I/O unit:    2048

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: VID header offset:          2048 (aligned 2048)

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: data offset:                4096

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: max. sequence number:       2998

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: attached mtd0 to ubi0

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: MTD device name:            "rootfs"

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: MTD device size:            225 MiB

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: number of good PEBs:        1790

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: number of bad PEBs:         10

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: number of corrupted PEBs:   0

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: max. allowed volumes:       128

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: wear-leveling threshold:    4096

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: number of internal volumes: 1

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: number of user volumes:     1

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: available PEBs:             0

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: total number of reserved PEBs: 1790

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: number of PEBs reserved for bad PEB handling: 17

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: max/mean erase counter: 117/75

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: image sequence number:  592932167

Jan  1 01:00:12 vusolo2 user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 44

Jan  1 01:00:12 vusolo2 user.notice kernel: UBIFS: parse sync

Jan  1 01:00:12 vusolo2 user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"

Jan  1 01:00:12 vusolo2 user.notice kernel: UBIFS: file system size:   223223808 bytes (217992 KiB, 212 MiB, 1758 LEBs)

Jan  1 01:00:12 vusolo2 user.notice kernel: UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)

Jan  1 01:00:12 vusolo2 user.notice kernel: UBIFS: media format:       w4/r0 (latest is w4/r0)

Jan  1 01:00:12 vusolo2 user.notice kernel: UBIFS: default compressor: lzo

Jan  1 01:00:12 vusolo2 user.notice kernel: UBIFS: reserved for root:  0 bytes (0 KiB)

Jan  1 01:00:12 vusolo2 user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:13.

Jan  1 01:00:12 vusolo2 user.info kernel: devtmpfs: mounted

Jan  1 01:00:12 vusolo2 user.info kernel: Freeing unused kernel memory: 172k freed

Jan  1 01:00:12 vusolo2 user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

Jan  1 01:00:12 vusolo2 user.warn kernel: procmk_init

Jan  1 01:00:12 vusolo2 user.warn kernel: dvb_bcm7356: module license 'Proprietary' taints kernel.

Jan  1 01:00:12 vusolo2 user.warn kernel: Disabling lock debugging due to kernel taint

Jan  1 01:00:12 vusolo2 user.info kernel: DVB: registering new adapter (vusolo2)

Jan  1 01:00:12 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:12 vusolo2 user.warn kernel: Hotplug - status.connected 1:0

Jan  1 01:00:12 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:12 vusolo2 user.warn kernel: Hotplug - connecting HDMI to display 0xe

Jan  1 01:00:12 vusolo2 user.warn kernel: [GP]:brcm_pwm_init

Jan  1 01:00:12 vusolo2 user.info kernel: brcm_demux_init: $Id: bcm_demux.c,v 0.7 $

Jan  1 01:00:12 vusolo2 user.warn kernel: [MPVR]: >> misc_pvr_init

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: <6>bcm7335_video_init

Jan  1 01:00:12 vusolo2 user.warn kernel: [AUD]: <6>bcm7335_audio_init

Jan  1 01:00:12 vusolo2 user.warn kernel: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...

Jan  1 01:00:12 vusolo2 user.warn kernel: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...

Jan  1 01:00:12 vusolo2 user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input0

Jan  1 01:00:12 vusolo2 user.info kernel: [LCD]: registered

Jan  1 01:00:12 vusolo2 user.warn kernel: 0:0

Jan  1 01:00:12 vusolo2 user.info kernel: [CI]: registered ci0

Jan  1 01:00:12 vusolo2 user.info kernel: [DFP]: registered dbox fp

Jan  1 01:00:12 vusolo2 user.info kernel: [DFP]: Scart 9597 is found 4

Jan  1 01:00:12 vusolo2 user.info kernel: [SC]: registered sci0

Jan  1 01:00:12 vusolo2 user.warn kernel: BKNI_P_GetTrackAllocEntry_resize: resizing from 4096->8192

Jan  1 01:00:12 vusolo2 user.warn kernel: BKNI_Malloc(linuxkernel) top users:

Jan  1 01:00:12 vusolo2 user.warn kernel:     blocks,   bytes, filename:line

Jan  1 01:00:12 vusolo2 user.warn kernel:        960,  204528, ../BSEAV/lib/utils/balloc.c:35

Jan  1 01:00:12 vusolo2 user.warn kernel:        550,   22000, ../magnum/basemodules/mem/bmem_system.c:286

Jan  1 01:00:12 vusolo2 user.warn kernel:        380,   45600, magnum/commonutils/mrc/7346/bmrc_monitor.c:940

Jan  1 01:00:12 vusolo2 user.info kernel: [SC]: registered sci1

Jan  1 01:00:12 vusolo2 user.warn kernel: system_time_set wakeup mode get 

Jan  1 01:00:12 vusolo2 user.warn kernel: system_time_set wakeup mode get 0xc4

Jan  1 01:00:12 vusolo2 user.warn kernel: fpga update driver loaded

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: network [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: __clk_enable: enet [1]

Jan  1 01:00:12 vusolo2 user.debug kernel: bcm40nm_pm_genet_enable 00

Jan  1 01:00:12 vusolo2 user.info kernel: eth0: Link up, 1000 Mbps Full Duplex

Jan  1 01:00:12 vusolo2 user.info kernel: NET: Registered protocol family 10

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Found user 'avahi' (UID 998) and group 'avahi' (GID 997).

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Successfully dropped root privileges.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: avahi-daemon 0.6.31 starting up.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Successfully called chroot().

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Successfully dropped remaining capabilities.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Loading service file /services/sftp-ssh.service.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Loading service file /services/ssh.service.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.30.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: New relevant interface eth0.IPv4 for mDNS.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Network interface enumeration completed.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Registering new address record for fe80::21d:ecff:fe04:aeac on eth0.*.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Registering new address record for 192.168.1.30 on eth0.IPv4.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[419]: Registering HINFO record with values 'MIPS'/'LINUX'.

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:13 vusolo2 daemon.info avahi-daemon[419]: Server startup complete. Host name is vusolo2.local. Local service cookie is 2657963396.

Jan  1 01:00:14 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:14 vusolo2 user.info kernel: [CI]: CI interface initialised

Jan  1 01:00:14 vusolo2 daemon.info avahi-daemon[419]: Service "vusolo2" (/services/ssh.service) successfully established.

Jan  1 01:00:14 vusolo2 daemon.info avahi-daemon[419]: Service "vusolo2" (/services/sftp-ssh.service) successfully established.

Jan  1 01:00:16 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:16 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:16 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:16 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:16 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:16 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:16 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:17 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:19 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:19 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:19 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:19 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:19 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:19 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:19 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:19 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:21 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:21 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:21 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:21 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:21 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:21 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:21 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:21 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:22 vusolo2 user.debug kernel: eth0: no IPv6 routers present

Jan  1 01:00:23 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:23 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:23 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:23 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:23 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:23 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:23 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:24 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:26 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:26 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:26 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:26 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:26 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:26 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:26 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:26 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:28 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:28 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:28 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:28 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:28 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:28 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:28 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:28 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:30 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:30 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:30 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:30 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:30 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:30 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:31 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:31 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:33 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:33 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  

Jan  1 01:00:33 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:33 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:33 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:33 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:33 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  

Jan  1 01:00:33 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:35 vusolo2 daemon.info init: Id "gui" respawning too fast: disabled for 5 minutes

Jan  1 01:00:35 vusolo2 daemon.info init: no more processes left in this runlevel

Jan  1 01:00:38 vusolo2 authpriv.warn login[516]: invalid password for 'root'  on '/dev/pts/0' from '192.168.1.83:56876'

Jan  1 01:00:47 vusolo2 authpriv.notice login[516]: ROOT LOGIN  on '/dev/pts/0' from '192.168.1.83:56876'

 

 

[chemic]

Gleiches Problem hier mit der Vu Solo2

 

Nach einem Update letzte Woche bootete meine Vu Solo2 nur noch bis zum Startbildschirm

 

Nichts ging mehr   Da ich kein Backup hatte, habe ich dann neu geflasht, danach gingen

auch die Updates wieder ohne Probleme, aber das Problem scheint ja weiterhin zu bestehen.

Edited by chemic, 2 November 2014 - 19:50.

[color86]

hab auch schon neu geflasht (aktuelles image) jedoch ging nach einigen neustarts die box wieder nicht. 

 

hab zum glück ein full backup das ich nun wieder eingespielt habe... 

[chemic]

Hm, scheint ja sonst kein Vu Solo2 Besitzer das gleiche Problem zu haben?

 

Zur Info: Meine Solo2 ist so gut wie neu und ist definitiv keine Clone STB

 

Mit der alten Vu Solo habe ich beschriebenes Problem übrigens nicht!

[Pedro_Newbie]

Here no problems on the solo2 with the updates and I do an update almost daily or at least 3 times a week

[color86]

kann niemand was mit den log files anfangen oder werden noch daten benötigt? kann das problem jederzeit reproduzieren mit einem update.

 

are the log-files unhelpful?

[color86]

Push

[Frenske]

Ich habe jedoch keinen Solo2 dabei aber könnte es sein das du nachdem du ein Image neu geflasht hast, das es da ein Backup auf der Festplatte steht die das Problem verursacht. Ich lese da u.a. etwas von einem falschen Passwort.
Versuche Mal ein Image zu Flaschen aber entferne erst mal das Backup.

Du könntest dir vorstellen das dies kein allgemeines Problem ist.

[chemic]

Mal eine kurze Rückmeldung von mir:

 

Das Problem trat bei mir beim Update vom 20.10.2014 auf.

 

=> Boot nur bis zum PLi Startbildschirm, keine weiteren Aktionen möglich, FTP Zugang aber möglich,

Ein Neustart der Solo² führte jedes mal zum gleichen Ergebnis. Solo² ohne HDD oder sonstige

angeschlossene Komponenten.

 

Dann das Image vom 20.10.2014 runter geladen und neu geflasht

 

Bislang keine Probleme mehr beim Update, Solo² startet wieder ohne Probleme

[Frenske]

Bislang keine Probleme mehr beim Update, Solo² startet wieder ohne Probleme

Und dies ist ja auch das wichtigste das der Box wieder einwandfrei funktioniert. Danke für die Meldung.