Sorry for my English.
I Ibox Cloud 2 Plus 750MHz processor. I installed boblight-enigma2_0.8r6b. Arduino Uno device I and 144 LEDs WS2811. CPU load of 50% while 30% boblightd boblight-enigma2. Everything comes with a delay, after a moment suspended.
[global]
interface 127.0.0.1
port 19333
[device]
Ambilight name
momo type
output / dev / ttyACM0
432 channels
prefix 41 64 61 00 18 4D
interval 20000
rate 115200
debug off
delayafteropen 100000
what I am doing wrong?
Hi Aniol,
Boblight for enigma2 is not developed anymore.
I have made alot of changes and changed the name to EnigmaLight. (See attachment for last beta)
Try it and let me know
Install notes:
- First remove Boblight
- Install new EnigmaLight (ipk can install on mipsel and mips32el)
- rename old boblight.conf to enigmalight.conf
- Restart your receiver and try the new plugin
Log Files:
- Turn on debuglogs (GUI logs) in settings for log files in /tmp/enigmalight_gui.log, we can share it here for help
- EnigmaLight program logs are found in /home/root/.enigmalight/enigmalight.log
ChangeLog:
- Added autostart options (off, server, dynamic, moodlamp)
- Fixed some bugs in GUI
- Fixed dm7080
- Fixed Connect from Hyperion or Xbmc
- [Fixed] Fixed update function
- [Fixed] I hope lihtpack is working now, cant test this because i have no lightpack devices.
- [Fixed] Network mode fixed, XBMC now connecting without problems
- [Fixed] Mode change method, when changed from mode grabber was starting one sec before switch to another mode. now change directly to mode
- Added/Fixed RGB Sequence
- Fixed Dreambox 7080HD
- A lot off cleanup
- Box detection works better now in About screen.
- Fixed a memoryleak
- [Fixed] log-function, printing double functions
- [Fixed] lightpack, now connect 2 or more lightpacks
- [Fixed] (Ihad Terror01) EL_Check.py, line 78, Crash fixed
- [Added] Smoothing (Tuning screen)
- Network mode fixed
- Disabled adjust mode for networkmode, because hyperion and default boblight don't have the liveadjust.
- Added new binary files for receivers without FPU support like the DM800 (but without FPU it will be slow)
- Changed log function
- Statusbar bug fixed
- Enigmalight can be used as grabber or moodlamp or server for boblight/hyperion clients
- Its only onefile, so now it use 8-9% cpu @ 1920x1080 with interval @ 0.10 (10fps) and can run on a dualcore with interval 0.01 @ 90fps with 40% cpu, but 90fps is overkill
- Grabber again optimized
- Added statusbar with info (RUNNING or NOT,CPU,FPS,MODE) in GUI and it will be refreshed every sec.
- New effects (rainbow, rgb test, later more...)
- Lightpack support fixed, now you can connect 2 lightpacks or more, see my website http://enigmalight.net for the howto.
- New GUI
- Log function, GUI will make log file in /tmp if you enable this option in settings
- Translations not done yet, first it must be stable
- Added a lot of new code
- Added BRCM7241 (et8000) and BRCM7346 (GigaBlue EU )chipsets
- Select configfile from settings
- Switch from local to networkmode
- And more