Jump to content


Photo

today update broke openpli

Started by delavega, 18 Dec 2014 11:29

  • Please log in to reply
266 replies to this topic

Re: today update broke openpli #21 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 19 December 2014 - 22:16

This is the result of VU+ offering a BSP layer now (just like most of the other manufacturers do nowadays), see the commit log. This amongst others means we can follow the developments from VU+ much more closely now :)


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: today update broke openpli #22 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 19 December 2014 - 22:20

Could you pinpoint where the BSP layer is located?


Re: today update broke openpli #23 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 19 December 2014 - 22:20

You mean: http://github.com/vu...meta-vuplus.git
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: today update broke openpli #24 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 19 December 2014 - 22:23

Allready found it, indeed I found the same url


Re: today update broke openpli #25 rodak

  • Member
  • 29 posts

0
Neutral

Posted 19 December 2014 - 22:39

Thank you, so we now get new drivers more frequently? Then maybe cec will work correctly for my solo2 with onkyo receiver/remote :-) Gonna flash in a couple of minutes. That if what Pedro says is true? For solo2 I can do it right now?
Thanks :-)

Merry Christmas!

Edited by rodak, 19 December 2014 - 22:40.

Re: today update broke openpli #26 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 19 December 2014 - 23:00

I see some strange entries in the BSP layers:

For the VU+ Duo2, and Solo2 I see
FORCE_REBOOT_OPTION = "reboot"
which is correct to reboot after a flash without confirmation

For the VU+ Zero and Solo SE I see in the BSP layer:
FORCE_REBOOT_OPTION = "force"
Is this also correct or could it be a typo?
 
 
If I'm not mistaken the force.update is the code to flash without confirmation and not reboot without confirmation
 
Here's a part of the log while restarting with an USB-stick with a valid image
checking front key
readFrontKey 0 0
Checking usbdisk0:/vuplus/solo2/ignore.update......NO
Checking usbdisk0:/vuplus/solo2/force.update......NO
Checking usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/splash_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/reboot.update......YES
waiting for update key

Edited by Pedro_Newbie, 19 December 2014 - 23:01.

Re: today update broke openpli #27 MortenB

  • Member
  • 11 posts

+1
Neutral

Posted 20 December 2014 - 00:17

I just updated my VU+ Uno with OpenPLI 4 using SSH terminal and after reboot the tuner stops on boot with text"Stating" on display.  No GUI (HDMI) is shown and tuner do not start Ethernet interface and do not get an LAN IP so I am not able to try any SSH or Telnet login.  Any suggestion where to start is most appreciated.


Re: today update broke openpli #28 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 20 December 2014 - 01:00

All VU's need to be flashed, you can not update.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: today update broke openpli #29 braunbär

  • Senior Member
  • 83 posts

+2
Neutral

Posted 20 December 2014 - 04:13

All VU's need to be flashed, you can not update.

Thanks a lot!

Even WOL is working now on my Duo2. ;-)


Vu+ Uno 4K SE and Duo2 @ OpenPLi 6.2

formerly: Vu+ Duo1 -> xTrend et9200 -> VU+ Solo2

Re: today update broke openpli #30 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 20 December 2014 - 09:03

That's good to hear.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: today update broke openpli #31 mattiL

  • Senior Member
  • 268 posts

+5
Neutral

Posted 20 December 2014 - 12:13

Flashed Duo2 with todays build, up and running in no time!

 

Thank's and a Merry Christmas to all!


Re: today update broke openpli #32 ovidijuslr

  • Member
  • 37 posts

0
Neutral

Posted 20 December 2014 - 14:53

Hello I just flash todays build but no luck is not booting only boot picture and after that not loading on solo 2 any suggestions? Thanks

Re: today update broke openpli #33 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 20 December 2014 - 15:37

Does it react to the remote control at all?


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: today update broke openpli #34 marcogpg

  • Member
  • 1 posts

0
Neutral

Posted 20 December 2014 - 15:56

Hi,

I'm having the same issue with my Solo2 after today's update.
Box keeps saying "Starting..." and nothing happens. No image on TV also.
It do not react to any remote control and I can't access with telnet.

Any suggestion? Thanks

Re: today update broke openpli #35 ovidijuslr

  • Member
  • 37 posts

0
Neutral

Posted 20 December 2014 - 16:39

No response while pressing buttons on remote control nothing happens

Re: today update broke openpli #36 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 20 December 2014 - 16:45

I'm having the same issue with my Solo2 after today's update.
Box keeps saying "Starting..." and nothing happens. No image on TV also.
It do not react to any remote control and I can't access with telnet.

How about reading the warning about updating today?


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: today update broke openpli #37 ovidijuslr

  • Member
  • 37 posts

0
Neutral

Posted 20 December 2014 - 17:05

Im flash from scratch but no good

Re: today update broke openpli #38 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 20 December 2014 - 19:09

Does it ping?


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: today update broke openpli #39 delavega

  • Senior Member
  • 377 posts

+2
Neutral

Posted 20 December 2014 - 19:09

i just flashed with todays OpenPLi-4.0-beta-vusolo2-20141220 build and everything is fine.


Edited by taboune, 20 December 2014 - 19:10.

<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ DUO 2</strong></span></span></p>
<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ SOLO</strong></span></span>

Re: today update broke openpli #40 delavega

  • Senior Member
  • 377 posts

+2
Neutral

Posted 20 December 2014 - 19:45

cant install hbbtv from the feed.

i always have to use this a cmd to install it.


<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ DUO 2</strong></span></span></p>
<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ SOLO</strong></span></span>
Back to [EN] Enduser support

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support