Posted 20 December 2014 - 21:28
After flashing todays solo2 image (with new kernel/drivers), I can't install the em28xx driver for my PCTV NanoStick. I suspect the driver needs to be updated after the upgrade to new kernel, so this is just a heads up if it is unexpected.
1_0_19_283D_3FB_1_C00000_0_0_0.jpg 79.56KB
9 downloads
Once again, thanks for providing the best image, and continuously working on making it even better :-)
-n0dder
vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A
1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)
Posted 29 December 2014 - 14:01
Just tried with todays image (20141229) and it seems that kernel-module-em28xx-dvb still isn't available in the feeds - is the issue that the module doesn't exist/can't be compiled for the current solo2 kernel, or am I just looking in the wrong places?
Regards,
n0dder
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-drivers-dvb-usb-em28xx:
* kernel-module-em28xx-dvb *
vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A
1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)
Posted 29 December 2014 - 14:40
Posted 29 December 2014 - 14:56
I guess this means a request towards VU+ to add support for the em28xx in their kernel?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 29 December 2014 - 16:21
Edited by n0dder, 29 December 2014 - 16:22.
vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A
1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)
Posted 30 December 2014 - 19:19
I will request it as well, but it may take some time, please have patience.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 30 December 2014 - 19:30
vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A
1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)
Posted 6 January 2015 - 10:22
After todays update (20150106) with added tuners PCTV NanoStick T2 (em28xx driver) works again for me - thanks Erik (and VU+) :-)
-n0dder
vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A
1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)
Posted 31 March 2015 - 10:08
After todays update (20150106) with added tuners PCTV NanoStick T2 (em28xx driver) works again for me - thanks Erik (and VU+) :-)
-n0dder
Even though I have installed the em28xx driver from the feed, the PCTV NanoStick T2 doesn't show up in the tuner list of my Solo2 with a fresh install of the latest OpenPli image. I have tried both USB ports, reboots etc.
On the OpenViX image (which I don't want to use) the PCTV NanoStick T2 shows up without any problems after downloading the em28xx driver from the OpenViX feed.
Are there any additional installation steps, downloads etc. required for OpenPli? Thanks in advance for any help!
KW
Posted 31 March 2015 - 12:47
Even though I have installed the em28xx driver from the feed, the PCTV NanoStick T2 doesn't show up in the tuner list of my Solo2 with a fresh install of the latest OpenPli image. I have tried both USB ports, reboots etc.
vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A
1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)
Posted 31 March 2015 - 16:57
Thanks a lot n0dder for your fast reply! I checked with dmesg and found "Unable to find symbol cxd2820r_attach()". So I guess this is the problem?
Where can I find the correct kernel-module-cxd2820r for the solo2 (only found one for the et9xxx, would it work?)? Sorry, I am no enigma2 ninja. 
Any help greatly appreciated!
KW
Posted 31 March 2015 - 17:19
Where can I find the correct kernel-module-cxd2820r for the solo2
vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A
1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)
Posted 31 March 2015 - 17:30
Thanks a lot n0dder for your fast reply! I checked with dmesg and found "Unable to find symbol cxd2820r_attach()". So I guess this is the problem?
Where can I find the correct kernel-module-cxd2820r for the solo2 (only found one for the et9xxx, would it work?)? Sorry, I am no enigma2 ninja.
Any help greatly appreciated!
KW
Just used the opkg install in telnet and they installed correctly. Now the tuner is found!!! Already scanning channels! Thanks again!!!
Kw
0 members, 3 guests, 0 anonymous users
