Posted 27 December 2014 - 12:23
Hi,
I try to search on the forum but I haven't found a reply. I installed the latest image for my Atemio Nemesis and works well but I noticed that I cannot use letters when compiling the name of a server, I can use only numbers because usually when I press on my remot the "2 " buttons it let me choose between 2 / a / b / c but here I can digit only numbers. I read it was a bug but is not solved yet ? thanks
Posted 27 December 2014 - 12:47
Is that one supported?
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 27 December 2014 - 13:13
As far as I know, Atemio Nemesis is not supported by OpenPLi, so I'm afraid you are on the wrong forum.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 27 December 2014 - 13:21
Is that one supported?
It was meant to be a rethorical question 
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 27 December 2014 - 13:50
Hi, but it works perfectly. It's only this problem that I have. On the VU+ too it happened this. Is there a solution or not ?
Posted 27 December 2014 - 13:52
As far as I know, Atemio Nemesis is not supported by OpenPLi, so I'm afraid you are on the wrong forum.
I don't understand why instead of helping to solve u have to criticize ? Help if u are able. Is not a problem of box because Vu+ and others has the same problem.
Posted 27 December 2014 - 14:05
It was not meant to criticize in any way. The question about the Vu is legit which one do you use?
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 27 December 2014 - 14:05
Vu zero same problem. thanks
Posted 27 December 2014 - 14:25
Same drivers, same bugs. Clearly a clone.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 27 December 2014 - 14:28
vu zero it's not a clone it's original, I bought on VU+site at 129 euro
Posted 27 December 2014 - 14:32
I referred to your Atemio, with which you opened this thread.
It's a bug in all VU drivers. One that is known for years, and one they can't be bothered to fix, since they've worked around the bug in their own image. Something we can't, and won't, do.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 27 December 2014 - 14:33
It's incredible why in a forum if I ask help, all starting telling it's a clone, it's not supported. Do u know why there's a bug or not ? I think if I don't know is better shut up. Atemio it's not a clone and Openpli images are available everything. Vu zero is original, I tried blackhole and now this but I noticed that bug.
Posted 27 December 2014 - 14:36
You started by saying it has the same problem as an original VU+. That can only be if it uses the VU+ drivers. And that is only the case with clones. So it's an obvious response.
Yes, we know EXACTLY what the bug is. VU+ knows it to. But they won't fix it. And it isn't the only bug, there are more.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 27 December 2014 - 14:58
It's a big bug, so I have to choose another one.
I spent 300 euro for Atemio + 129 for Vu zero and both have bugs in their images. Incredible.
thanks anyway
Posted 27 December 2014 - 17:31
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 27 December 2014 - 21:50
To be honest, that won't solve this bug, all VU's suffer from it, and we have official images for them all.
@MrFunk,
It's the famous alpha-test bug, where the driver reports the remote is an alphanumeric device (aka has a keyboard), so Enigma switches from "mobile phone" input mode to "keyboard" input mode. Which is false, as it's a standard remote. This in turn is caused by the driver re-using the input device for every possible input, instead of having multiple input devices to handle different capabilties.
VU+ worked around it in their image, which we can't do, because that will break it for all non-VU images. And we refuse to add a "if VU+ then hack something stupid" to our code.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 1 guests, 0 anonymous users
