Hi, After the update (VU+ Duo) files 191 tuner restarts and never turn on. It is necessary to upload a copy via USB. What's happening again? Regrads
VU+ Duo update
Re: VU+ Duo update #2
Posted 29 December 2014 - 17:52
Kernel update (to fix the problems with cifs and ext4). Kernel updates don't go smooth with updates yet on VU+, so you must flash, again. They seem to have fixed it now, but I haven't tested it.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ Duo update #3
Re: VU+ Duo update #4
Posted 29 December 2014 - 23:29
DM5620, DM500S, DM600, DM7000, DM7020, DM7025, DM800, DM8000, ET9200, ET6500, ET7500, ET8500, VU+DUO, VU+ULTIMO, GB800SE, GB800HD all with OpenPLi
Only the DM5620 went off in 2012 ! DM500S, DM600, DM7000 & DM7020 have been sold in 2014.
Re: VU+ Duo update #5
Posted 29 December 2014 - 23:56
VU+ Uno here.
Online update failed miserably - STARTING forever after a reboot
Flashing the today's image results in missing ext4 drivers, telnet is not enabled (?), ssh not accessible for obvious reason.
Finally connected with ssh after manualy restoring ~/.ssh and found that dvb drivers are not up-to-date:
vuplus-dvb-modules-vuuno - 3.9.6+20141021-r0.1 - vuplus-dvb-modules-vuuno version 3.9.6+20141021-r0 Hardware drivers for
Best update ever
Same $hit different day ?
Edited by greatred, 30 December 2014 - 00:01.
Re: VU+ Duo update #6
Posted 30 December 2014 - 08:23
Is it ok or do we need to reflash the box ?
DM5620, DM500S, DM600, DM7000, DM7020, DM7025, DM800, DM8000, ET9200, ET6500, ET7500, ET8500, VU+DUO, VU+ULTIMO, GB800SE, GB800HD all with OpenPLi
Only the DM5620 went off in 2012 ! DM500S, DM600, DM7000 & DM7020 have been sold in 2014.
Re: VU+ Duo update #7
Re: VU+ Duo update #8
Re: VU+ Duo update #9
Posted 30 December 2014 - 12:55
I suggest you wait until VU+ has sorted out it's kernel mess, because it's still not correct, so expect more bulk updates in the near future.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU+ Duo update #10
Re: VU+ Duo update #11
Posted 30 December 2014 - 14:07
There is no changelog of this specific issue.
The BSP layer, the source repository that contains box specific settings, is maintained by the vendor. We don't have access to it, and don't control it.
If they make a change that has impact on the kernel (new version, new kernel options or compile time switches), it will result in rebuilding half the image, which is why you see so many updated packages. Which surprises us as much as you. Especially when it seems to be done without proper testing, and the next day important kernel options are missing.
You get a message on the box to warn you about this when you want to update, or on the website when you want to download a new image. It's currently active for all VU+ boxes. When it's fixed the message will disappear.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU+ Duo update #12
Re: VU+ Duo update #13
Posted 30 December 2014 - 15:26
It was true, but after that VU+ changed the kernel options. The message has been changed to reflect the current status.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU+ Duo update #14
Re: VU+ Duo update #15
Posted 30 December 2014 - 15:52
I can't say, I don't use other images. It will affect all images using the VU+ BSP layer.
It is a temporary problem, VU+ is aware of it, and they are working on it (they have fixed the cifs issue, but still need to fix the missing ext4 module).
There is no new functionality between your last flash and now, so you're not missing anything by enjoying the holidays and resisting the urge to update for a few days...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU+ Duo update #16
Posted 30 December 2014 - 15:55
Actually there is no "missing ext4 module" issue. The module has been integrated into the kernel (exactly like we requested) so there is no module, no package. Check with cat /proc/filesystems
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ Duo update #17
Posted 30 December 2014 - 15:57
So the image is 100% complete again? After flashing it no more huge package updates tomorrow? If so, the warning on the site/box needs to be changed.
I don't have a VU+ connected at the moment, I can't test...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU+ Duo update #18
Re: VU+ Duo update #19
Posted 30 December 2014 - 17:44
Indeed, the huge updates are caused by problems in the building process that we still haven't been able to solve permanently, unfortunately.
The reason why the VU+ image doesn't boot is still the same, the kernel gets written to the flash (because a kernel update is necessary), but it isn't erased first, because the necessary tool mtd_erase is missing. VU+ has corrected this now, but I am afraid there still needs to be one round of flashing. And maybe the solution simply doesn't work, I didn't check yet.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ Duo update #20
Posted 31 December 2014 - 00:04
So the image is 100% complete again? After flashing it no more huge package updates tomorrow? If so, the warning on the site/box needs to be changed.
I don't have a VU+ connected at the moment, I can't test...
No Mount from other VU boxes and NAS still don't work
Have reflashed all my VU+ boxes today
7 user(s) are reading this topic
0 members, 7 guests, 0 anonymous users