I can confirm, users "socks" is right, after cool down (10 min off), error is gone till next reboot
this usb adapter is working out of the box with Openpli - IcyBox IB-AC501 USB 3.0 to Gigabit Ethernet Adapter
usb ID 0b95:1790
ASIX USB Ethernet Adapter:v1.4.0 20:54:53 Apr 12 2016
_http://www.asix.com.tw
ax88179_178a 3-1.3:1.0 (unnamed net_device) (uninitialized): mtu 1500
ax88179_178a 3-1.3:1.0 eth2: register 'ax88179_178a' at usb-ehci_hcd-1.3, ASIX AX88179 USB 3.0 Gigibit Ethernet
VLAN port on ET10000 is continuously flapping
Started by socks, 08 Jan 2015 14:10
49 replies to this topic
Re: VLAN port on ET10000 is continuously flapping #41
-
- Senior Member
- 26 posts
0
Neutral
Posted 3 April 2017 - 12:07
Re: VLAN port on ET10000 is continuously flapping #42
-
- Senior Member
- 1,185 posts
+16
Neutral
Posted 3 April 2017 - 14:21
I hope this one works also
https://www.amazon.d...0?ie=UTF8&psc=1
I´ve ordered it
It has the ax88179 chip
Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX
Re: VLAN port on ET10000 is continuously flapping #43
-
- Senior Member
- 4,774 posts
+69
Good
Posted 3 April 2017 - 17:48
This one works I have the same.
Groetjes Cobus R
VU+ UNO 4K SE FBC DVB-C (8x)
MUTANT HD66SE FBC DVB-C (3x)
MAXYTEC MULTIBOX COMBO
MUTANT HD60 DVB-S
Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner
Re: VLAN port on ET10000 is continuously flapping #44
-
- Senior Member
- 1,185 posts
+16
Neutral
Posted 4 April 2017 - 19:22
It works with my et8000 too. Great. file copy It is a little bit slower than over the integrated ethernet, but I hope it is stable.
Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX
Re: VLAN port on ET10000 is continuously flapping #45
-
- Senior Member
- 4,774 posts
+69
Good
Posted 5 April 2017 - 14:34
It's stable I use for more than 1 year now and works great.
Groetjes Cobus R
VU+ UNO 4K SE FBC DVB-C (8x)
MUTANT HD66SE FBC DVB-C (3x)
MAXYTEC MULTIBOX COMBO
MUTANT HD60 DVB-S
Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner
Re: VLAN port on ET10000 is continuously flapping #46
-
- Senior Member
- 987 posts
+8
Neutral
Posted 12 November 2020 - 13:00
Hi - after three years - I am wondering if I should reincarnate my ET8000 using three dvb-c as well a one dvb-c/t2 tuner.
Issue back then as topic says the VLAN port on "ET10000 " is flapping continuously , similar issue was for ET8000 I believe?
To cut a long story short, the ET8000 I used barely and my ET10000 is still being used, however just the 100Mbit port.
Since dish has been removed and just DVB-C left, I want to swap my H7 with the ET8000 so could use 3-4 streams simultaneously.
The box will act as a server and UHD channels ( +/- 25Mbit ) will be displayed on client.
Therefore it is of utmost importance, the Ethernet port works without any hickups, preferably full Gigabit speed , but could survive with just 100Mbit if that brings stability I guess.
Any view on this?
TiA!
Re: VLAN port on ET10000 is continuously flapping #47
-
- PLi® Core member
- 70,452 posts
+1,809
Excellent
Posted 12 November 2020 - 13:05
Never had an 8000, so I can't comment on the quality of its ethernet port. But I used the 10K as my main box back in 2014/2015, and never had a "flapping" port issue.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VLAN port on ET10000 is continuously flapping #48
-
- Senior Member
- 652 posts
+8
Neutral
Posted 12 November 2020 - 15:52
I have both and can confirm the "flapping" issue on the ET10000. Wanwizard pointed that out to me. I changed to the 100mb port and had no issues with flapping since. I (still) use 3 ET10000's.
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Re: VLAN port on ET10000 is continuously flapping #49
-
- Senior Member
- 987 posts
+8
Neutral
Posted 12 November 2020 - 16:40
@jort38 - cheers for that, so using the 100Mbit port only on my ET10000 was a wise choice, now what about the ET8000 . This box has one LAN port only but hope not similar side effects as ET10000 ....
Re: VLAN port on ET10000 is continuously flapping #50
-
- Senior Member
- 652 posts
+8
Neutral
Posted 13 November 2020 - 11:27
@jort38 - cheers for that, so using the 100Mbit port only on my ET10000 was a wise choice, now what about the ET8000 . This box has one LAN port only but hope not similar side effects as ET10000 ....
Well, I do have an ET8000 (in Thailand), but that gets an anual update from a stick as it is not connected to the internet. That box is only used when I am there on DVB-T.
So I have no recent experience with that LAN port.
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
