Posted 24 January 2015 - 22:34
Dear opli
I was using a couple of month old opli without issue. Wanted to do an online update, but it failed. So I reflash the lastest image, and I have a issue with setting resolution : basicaly, either in the initial wizard or later in AV parameters, trying 1080(either i or p) kinda crashes the box. The video continue, but skin is missing, and remote is not responding
Any clues ?
G
Edited by Gandalf, 24 January 2015 - 22:37.
Posted 25 January 2015 - 09:19
@opli team,
I have investigated a little here. When manualy launching enigma (inti 4) after editing settings to ask for 1080, enigma would hang very early in the process, when setting video. If you tried to crtl+c at that time to abord it, it would complain about stuck ioctl. Loocking at your git, I did notice that the kernel modules where updated a couple of days ago, with a 'fix display issues' label, so I started wondering if there was a link there, So I downloaded the previous 20141205 modules from hd-digital and manualy replaced the files under /lib/modules/3.17.3/extra, reboot and voila, it works, So my humble guess is either those drivers are buggy, or the way to ask them to change resolution has changed, but either way, they do not currently work with your image.
G
Posted 25 January 2015 - 09:29
I am running the hd2400 in 1080p50 mode, no problem. But I must say I didn't yet update since that change.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 25 January 2015 - 09:44
Oh I was previously too 
But not with the latest change I'm afraid (I might obviously be wrong; I differ to your better judgment )
G
Posted 25 January 2015 - 09:56
I hope someone else is fierce enough
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 25 January 2015 - 10:33
Mine is in production too, so this 'episode' was not so welcomed by my wife 
Anyhow, here is a receipe to get you out of trouble if you updated and find your box is crashing :
- start your hd2400, enigma will crash, let it in that state. Network and samba should be up
- download previous modules : http://downloads.mut....3-20141205.zip
- open either with samba of ftp your hd2400 files and replace/overwrite the 4 files in /lib/modules/3.17.3/extra by the one in the zip (leave cdfs.ko alone )
- reboot your box (you'll have to use the power switch for that)
- njoy
G
Edited by Gandalf, 25 January 2015 - 10:34.
Posted 26 January 2015 - 20:56
The drivers have been reverted by the manufacturer. Update tomorrow and it will work again.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 27 January 2015 - 08:09
Good, I was not tooo wrong then . Actualy, looking at the md5sum, they are not the previous drivers, despite what their comment says on the commit
G
Posted 27 January 2015 - 08:23
Erik,
Could you check that the change as effectively gotten to your server ? I have updated, go enigma2 and plugins update, but not the modules
G
Posted 27 January 2015 - 11:00
I think it might be missing a git commit, I can see one for the previous change (http://sourceforge.n...15cdbbb9eaf861/) but none for yesterday's change
G
Posted 27 January 2015 - 18:00
Corrected.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 1 February 2015 - 13:10
It did work great Erik, thanks ! I believe there is an even newer version : https://github.com/H...a46b34f6d435820
Best regards, G
Posted 1 February 2015 - 13:12
It's in now!
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 1 February 2015 - 13:18
wtf !!!!! How can you be so faaaaaaaaaaaaaaaast It took you a whooping 2 minutes !!! You rule !!!
G
Posted 1 February 2015 - 13:32
I have made a script that automatically merges all updates from all manufacturers' bsp submodule.
So this is what I do:
$ git pull
$ ./update
$ git push
So not really much work
Takes about 10 seconds to complete.
Edited by Erik Slagter, 1 February 2015 - 13:32.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 1 February 2015 - 13:44
Probably an issue on my side, but thought I would mention it just in case. I did a make update and got that :
Posted 1 February 2015 - 15:03
Did you do a git submodule update?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
0 members, 4 guests, 0 anonymous users
