13 replies to this topic

[Rendal-Raines]

I have a Rtl 2838u dvb-t usb that don't work on Vu Solo2 with OpenPLI version 4.0

 

The id hardware is:

 

root@vusolo2:~# lsusb           
Bus 002 Device 002: ID 0bda:2838

 

I tried to use the Rtl 2832 driver. dvb-usb rtl2832 (1.0r2)

 

But does not function.

 

 

Any idea?

 

Is there any driver compatible with my dvb-t usb?

 

 

Thanks

[athoik]

Did you install enigma2-plugin-drivers-dvb-usb-rtl2832?

[Rendal-Raines]

Yes I installed enigma2-plugin-drivers-dvb-usb-rtl2832  (1.0r2)

It seems to work

But when I change channel the decoder crashes.

The Rtl 2838u dvb-t is recognised as rtl2832 instead of rtl2838u.

[athoik]

So the usb stick is recognized by your STB. Since you are getting a crash a log might help.

[Rendal-Raines]

var/volatile/log/messanger ??

[Rendal-Raines]

Jan  1 01:00:11 vusolo2 syslog.info syslogd started: BusyBox v1.22.1

Jan  1 01:00:11 vusolo2 user.notice kernel: klogd started: BusyBox v1.22.1 (2015-01-31 08:41:22 CET)

Jan  1 01:00:11 vusolo2 user.notice kernel: Key type id_resolver registered

Jan  1 01:00:11 vusolo2 user.notice kernel: Key type id_legacy registered

Jan  1 01:00:11 vusolo2 user.info kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...

Jan  1 01:00:11 vusolo2 user.info kernel: Installing knfsd (copyright © 1996 okir@monad.swb.de).

Jan  1 01:00:11 vusolo2 user.info kernel: fuse init (API version 7.22)

Jan  1 01:00:11 vusolo2 user.info kernel: msgmni has been set to 1117

Jan  1 01:00:11 vusolo2 user.info kernel: io scheduler noop registered

Jan  1 01:00:11 vusolo2 user.info kernel: io scheduler cfq registered (default)

Jan  1 01:00:11 vusolo2 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

Jan  1 01:00:11 vusolo2 user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A

Jan  1 01:00:11 vusolo2 user.info kernel: console [ttyS0] enabled

Jan  1 01:00:11 vusolo2 user.info kernel: bootconsole [early0] disabled

Jan  1 01:00:11 vusolo2 user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A

Jan  1 01:00:11 vusolo2 user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A

Jan  1 01:00:11 vusolo2 user.info kernel: loop: module loaded

Jan  1 01:00:11 vusolo2 user.err kernel: ahci strict-ahci.0: can't get clock

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_enable: sata [1]

Jan  1 01:00:11 vusolo2 user.debug kernel: bcm40nm_pm_sata_enable 00

Jan  1 01:00:11 vusolo2 user.info kernel: ahci strict-ahci.0: SSS flag set, parallel bus scan disabled

Jan  1 01:00:11 vusolo2 user.info kernel: ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

Jan  1 01:00:11 vusolo2 user.info kernel: ahci strict-ahci.0: flags: ncq sntf stag clo slum part 

Jan  1 01:00:11 vusolo2 user.info kernel: scsi0 : ahci_platform

Jan  1 01:00:11 vusolo2 user.info kernel: scsi1 : ahci_platform

Jan  1 01:00:11 vusolo2 user.info kernel: ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41

Jan  1 01:00:11 vusolo2 user.info kernel: ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41

Jan  1 01:00:11 vusolo2 user.info kernel: brcmstb_nand: NAND controller driver is loaded

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_enable: network [1]

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_enable: enet [1]

Jan  1 01:00:11 vusolo2 user.debug kernel: bcm40nm_pm_genet_enable 00

Jan  1 01:00:11 vusolo2 user.crit kernel: Found PHY at Address 3

Jan  1 01:00:11 vusolo2 user.info kernel: bcmgenet: configuring instance #0 for external RGMII

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_disable: enet [0]

Jan  1 01:00:11 vusolo2 user.debug kernel: bcm40nm_pm_genet_disable 00

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_disable: network [0]

Jan  1 01:00:11 vusolo2 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_enable: usb [1]

Jan  1 01:00:11 vusolo2 user.debug kernel: bcm40nm_pm_usb_enable 00

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ata1: SATA link down (SStatus 0 SControl 300)

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00

Jan  1 01:00:11 vusolo2 user.info kernel: hub 1-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 1-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00

Jan  1 01:00:11 vusolo2 user.info kernel: hub 2-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 2-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: Broadcom STB EHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00

Jan  1 01:00:11 vusolo2 user.info kernel: hub 3-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 3-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: Broadcom STB EHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500

Jan  1 01:00:11 vusolo2 user.info kernel: ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00

Jan  1 01:00:11 vusolo2 user.info kernel: hub 4-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 4-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400

Jan  1 01:00:11 vusolo2 user.info kernel: hub 5-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 5-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600

Jan  1 01:00:11 vusolo2 user.info kernel: ata2: SATA link down (SStatus 0 SControl 300)

Jan  1 01:00:11 vusolo2 user.info kernel: hub 6-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 6-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.2: Broadcom STB OHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400

Jan  1 01:00:11 vusolo2 user.info kernel: usb 2-1: new high-speed USB device number 2 using ehci-brcm

Jan  1 01:00:11 vusolo2 user.info kernel: hub 7-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 7-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.3: Broadcom STB OHCI

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8

Jan  1 01:00:11 vusolo2 user.info kernel: ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600

Jan  1 01:00:11 vusolo2 user.info kernel: hub 8-0:1.0: USB hub found

Jan  1 01:00:11 vusolo2 user.info kernel: hub 8-0:1.0: 1 port detected

Jan  1 01:00:11 vusolo2 user.info kernel: usbcore: registered new interface driver usb-storage

Jan  1 01:00:11 vusolo2 user.info kernel: mousedev: PS/2 mouse device common for all mice

Jan  1 01:00:11 vusolo2 user.info kernel: i2c /dev entries driver

Jan  1 01:00:11 vusolo2 user.info kernel: IR NEC protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: IR RC5(x) protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: IR RC6 protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: IR JVC protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: IR Sony protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: IR RC5 (streamzap) protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: IR SANYO protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: IR MCE Keyboard/mouse protocol handler initialized

Jan  1 01:00:11 vusolo2 user.info kernel: usbcore: registered new interface driver btusb

Jan  1 01:00:11 vusolo2 user.info kernel: Bluetooth: Generic Bluetooth SDIO driver ver 0.1

Jan  1 01:00:11 vusolo2 user.info kernel: sdhci: Secure Digital Host Controller Interface driver

Jan  1 01:00:11 vusolo2 user.info kernel: sdhci: Copyright© Pierre Ossman

Jan  1 01:00:11 vusolo2 user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper

Jan  1 01:00:11 vusolo2 user.info kernel: hidraw: raw HID events driver © Jiri Kosina

Jan  1 01:00:11 vusolo2 user.info kernel: usbcore: registered new interface driver usbhid

Jan  1 01:00:11 vusolo2 user.info kernel: usbhid: USB HID core driver

Jan  1 01:00:11 vusolo2 user.info kernel: TCP: cubic registered

Jan  1 01:00:11 vusolo2 user.info kernel: NET: Registered protocol family 17

Jan  1 01:00:11 vusolo2 user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Jan  1 01:00:11 vusolo2 user.info kernel: Bluetooth: HIDP socket layer initialized

Jan  1 01:00:11 vusolo2 user.notice kernel: Key type dns_resolver registered

Jan  1 01:00:11 vusolo2 user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor

Jan  1 01:00:11 vusolo2 user.info kernel: EBI CS0: setting up NAND flash (primary)

Jan  1 01:00:11 vusolo2 user.info kernel: NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit)

Jan  1 01:00:11 vusolo2 user.info kernel: NAND device: 256MiB, SLC, page size: 2048, OOB size: 64

Jan  1 01:00:11 vusolo2 user.info kernel: brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC

Jan  1 01:00:11 vusolo2 user.info kernel: Bad block table found at page 131008, version 0x04

Jan  1 01:00:11 vusolo2 user.info kernel: Bad block table found at page 130944, version 0x04

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000000700000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000001aa0000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x0000030c0000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000006b40000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x000007fe0000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x00000a780000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x00000bfa0000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x00000c260000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x00000de80000

Jan  1 01:00:11 vusolo2 user.info kernel: nand_read_bbt: bad block at 0x00000e4e0000

Jan  1 01:00:11 vusolo2 user.notice kernel: Creating 4 MTD partitions on "brcmnand.0":

Jan  1 01:00:11 vusolo2 user.notice kernel: 0x000001f00000-0x000010000000 : "rootfs"

Jan  1 01:00:11 vusolo2 user.notice kernel: 0x000001f00000-0x000010000000 : "rootfs(redundant)"

Jan  1 01:00:11 vusolo2 user.notice kernel: 0x000000200000-0x000000900000 : "kernel"

Jan  1 01:00:11 vusolo2 user.notice kernel: 0x000000900000-0x000000a00000 : "mac"

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: attaching mtd0 to ubi0

Jan  1 01:00:11 vusolo2 user.notice kernel: random: nonblocking pool is initialized

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: scanning is finished

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: good PEBs: 1788, bad PEBs: 12, corrupted PEBs: 0

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: max/mean erase counter: 262/31, WL threshold: 4096, image sequence number: 1303317359

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 1788, PEBs reserved for bad PEB handling: 28

Jan  1 01:00:11 vusolo2 user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 53

Jan  1 01:00:11 vusolo2 user.info kernel: ALSA device list:

Jan  1 01:00:11 vusolo2 user.info kernel:   No soundcards found.

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: parse sync

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 56

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: recovery needed

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: recovery completed

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)

Jan  1 01:00:11 vusolo2 user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 1868AC4F-90F3-48E2-8583-3E55C43D9183, small LPT model

Jan  1 01:00:11 vusolo2 user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:12.

Jan  1 01:00:11 vusolo2 user.info kernel: devtmpfs: mounted

Jan  1 01:00:11 vusolo2 user.info kernel: Freeing unused kernel memory: 248K (807e2000 - 80820000)

Jan  1 01:00:11 vusolo2 user.warn kernel: procmk_init

Jan  1 01:00:11 vusolo2 user.warn kernel: dvb_bcm7356: module license 'Proprietary' taints kernel.

Jan  1 01:00:11 vusolo2 user.warn kernel: Disabling lock debugging due to kernel taint

Jan  1 01:00:11 vusolo2 user.info kernel: DVB: registering new adapter (vusolo2)

Jan  1 01:00:11 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:11 vusolo2 user.warn kernel: Hotplug - status.connected 1:0

Jan  1 01:00:11 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:11 vusolo2 user.warn kernel: Hotplug - connecting HDMI to display 0xe

Jan  1 01:00:11 vusolo2 user.warn kernel: [GP]:brcm_pwm_init

Jan  1 01:00:11 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:11 vusolo2 user.warn kernel: Hotplug - status.connected 1:1

Jan  1 01:00:11 vusolo2 user.info kernel: brcm_demux_init: $Id: bcm_demux.c,v 0.7 $

Jan  1 01:00:11 vusolo2 user.warn kernel: [MPVR]: >> misc_pvr_init

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: ^A6bcm7335_video_init

Jan  1 01:00:11 vusolo2 user.warn kernel: [AUD]: ^A6bcm7335_audio_init

Jan  1 01:00:11 vusolo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...

Jan  1 01:00:11 vusolo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...

Jan  1 01:00:11 vusolo2 user.warn kernel: BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704

Jan  1 01:00:11 vusolo2 user.warn kernel: BKNI_Malloc(linuxkernel) top users:

Jan  1 01:00:11 vusolo2 user.warn kernel:     blocks,   bytes, filename:line

Jan  1 01:00:11 vusolo2 user.warn kernel:       1024,  176128, portinginterface/hsm/src/common/bhsm.c:500

Jan  1 01:00:11 vusolo2 user.warn kernel:        683,  157540, BSEAV/lib/utils/balloc.c:31

Jan  1 01:00:11 vusolo2 user.warn kernel:        385,   24640, magnum/commonutils/mrc/src/bmrc_monitor.c:666

Jan  1 01:00:11 vusolo2 user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input0

Jan  1 01:00:11 vusolo2 user.info kernel: [LCD]: registered

Jan  1 01:00:11 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:11 vusolo2 user.warn kernel: Hotplug - status.connected 1:1

Jan  1 01:00:11 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:11 vusolo2 user.warn kernel: Hotplug - status.connected 1:1

Jan  1 01:00:11 vusolo2 user.warn kernel: bcm7356: hotplug_callback(): 

Jan  1 01:00:11 vusolo2 user.warn kernel: Hotplug - status.connected 1:1

Jan  1 01:00:11 vusolo2 user.warn kernel: 0:0

Jan  1 01:00:11 vusolo2 user.info kernel: [CI]: registered ci0

Jan  1 01:00:11 vusolo2 user.info kernel: [DFP]: registered dbox fp

Jan  1 01:00:11 vusolo2 user.info kernel: [DFP]: Scart 9597 is found 4

Jan  1 01:00:11 vusolo2 user.info kernel: [SC]: registered sci0

Jan  1 01:00:11 vusolo2 user.info kernel: [SC]: registered sci1

Jan  1 01:00:11 vusolo2 user.warn kernel: system_time_set wakeup mode get 

Jan  1 01:00:11 vusolo2 user.warn kernel: system_time_set wakeup mode get 0xc4

Jan  1 01:00:11 vusolo2 user.warn kernel: fpga update driver loaded

Jan  1 01:00:11 vusolo2 user.info kernel: usb 2-1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state

Jan  1 01:00:11 vusolo2 user.info kernel: usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

Jan  1 01:00:11 vusolo2 user.info kernel: DVB: registering new adapter (Realtek RTL2832U reference design)

Jan  1 01:00:11 vusolo2 user.info kernel: usb 2-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...

Jan  1 01:00:11 vusolo2 user.info kernel: r820t 4-001a: creating new instance

Jan  1 01:00:11 vusolo2 user.info kernel: r820t 4-001a: Rafael Micro r820t successfully identified

Jan  1 01:00:11 vusolo2 user.info kernel: Registered IR keymap rc-empty

Jan  1 01:00:11 vusolo2 user.info kernel: input: Realtek RTL2832U reference design as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0/input1

Jan  1 01:00:11 vusolo2 user.info kernel: rc0: Realtek RTL2832U reference design as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0

Jan  1 01:00:11 vusolo2 user.info kernel: input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input2

Jan  1 01:00:11 vusolo2 user.info kernel: usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs

Jan  1 01:00:11 vusolo2 user.info kernel: usb 2-1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected

Jan  1 01:00:11 vusolo2 user.info kernel: usbcore: registered new interface driver dvb_usb_rtl28xxu

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  0

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:11 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_enable: network [1]

Jan  1 01:00:11 vusolo2 user.debug kernel: __clk_enable: enet [1]

Jan  1 01:00:11 vusolo2 user.debug kernel: bcm40nm_pm_genet_enable 00

Jan  1 01:00:11 vusolo2 user.info kernel: bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex

Jan  1 01:00:11 vusolo2 user.info kernel: NET: Registered protocol family 10

Jan  1 01:00:11 vusolo2 user.warn kernel: svc: failed to register lockdv1 RPC service (errno 124).

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Found user 'avahi' (UID 997) and group 'avahi' (GID 997).

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Successfully dropped root privileges.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: avahi-daemon 0.6.31 starting up.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Successfully called chroot().

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Successfully dropped remaining capabilities.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Loading service file /services/sftp-ssh.service.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Loading service file /services/ssh.service.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.40.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: New relevant interface eth0.IPv4 for mDNS.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Network interface enumeration completed.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Registering new address record for fe80::21d:ecff:fe00:2112 on eth0.*.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Registering new address record for 192.168.0.40 on eth0.IPv4.

Jan  1 01:00:11 vusolo2 daemon.info avahi-daemon[479]: Registering HINFO record with values 'MIPS'/'LINUX'.

Jan  1 01:00:12 vusolo2 daemon.info avahi-daemon[479]: Server startup complete. Host name is vusolo2.local. Local service cookie is 2563820430.

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1  0

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 1  2 0

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1  1 

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1  1 0

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 0  1

Jan  1 01:00:12 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0

Jan  1 01:00:13 vusolo2 daemon.info avahi-daemon[479]: Service "vusolo2" (/services/ssh.service) successfully established.

Jan  1 01:00:13 vusolo2 daemon.info avahi-daemon[479]: Service "vusolo2" (/services/sftp-ssh.service) successfully established.

Jan  1 01:00:14 vusolo2 user.err kernel: [LCD]: unknown cmd 0x1015

Jan  1 01:00:14 vusolo2 user.info kernel: [CI]: CI interface initialised

Jan  1 01:00:15 vusolo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)...

Jan  1 01:00:16 vusolo2 user.err kernel: UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16

Feb  7 15:41:31 vusolo2 daemon.notice ntpdate[393]: step time server 212.45.144.3 offset 1423320072.323907 sec

Feb  7 15:41:39 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MUTE 0 

Feb  7 15:41:39 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER -816947728 

Feb  7 15:41:39 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0

Feb  7 15:41:39 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0

Feb  7 15:41:39 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

Feb  7 15:41:41 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER -816947728 

Feb  7 15:41:41 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : amixl 19, amixr 19

Feb  7 15:41:42 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

Feb  7 15:41:42 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -1427, right volume -1427

Feb  7 15:41:44 vusolo2 user.err kernel: [SC]: !!!unknown cmd 0x5407

Feb  7 15:41:47 vusolo2 daemon.debug CCcam: ======================================================================

Feb  7 15:41:47 vusolo2 daemon.debug CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08

Feb  7 15:41:47 vusolo2 daemon.debug CCcam: ======================================================================

Feb  7 15:41:47 vusolo2 daemon.debug CCcam: online using nodeId 9702bf692fb92f08

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: static cw not found or bad

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: server started on port 12500

Feb  7 15:41:48 vusolo2 user.warn kernel: FE tune

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0 

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 1 

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: downmix 0 state : 0

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6506832 

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6506832 decoder start : 0

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 1

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6506832  0

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6506832  2 2

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1

Feb  7 15:41:48 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6506832  1 

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6506832 1 aph=0xcad24a00

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: Mute : 0

Feb  7 15:41:48 vusolo2 user.warn kernel: [AUD]: AUDIO_CHANNEL_SELECT 0 

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: EMM: not interested in 0919:000000

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: EMM: not interested in 093B:000000

Feb  7 15:41:48 vusolo2 daemon.debug CCcam: EMM: not interested in 09CD:000000

Feb  7 15:42:13 vusolo2 cron.err crond[459]: time disparity of 23722002 minutes detected

Feb  7 15:55:18 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1

Feb  7 15:55:18 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6506832 

Feb  7 15:55:18 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6506832 0 aph=0x0

Feb  7 15:55:18 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0

Feb  7 15:55:20 vusolo2 user.warn kernel: !!!^M[DMX]: paserband_remove_pid pid 0x708 not found

Feb  7 15:55:20 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0 

Feb  7 15:55:20 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 0 

Feb  7 15:55:20 vusolo2 user.warn kernel: [AUD]: AC3 downmix 0  state : 0

Feb  7 15:55:20 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6506832 

Feb  7 15:55:20 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6506832 decoder start : 0

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 1 

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6506832  0

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6506832  5 2

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6506832  1 

Feb  7 15:55:20 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6506832 1 aph=0xcad98a80

Feb  7 15:55:20 vusolo2 user.warn kernel: [AUD]: Mute : 0

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0

Feb  7 15:55:20 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 0

Feb  7 15:55:21 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1

Feb  7 15:55:21 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1

Feb  7 15:55:21 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6506832  1 

Feb  7 15:55:21 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6506832 1 aph=0xcad98a80

Feb  7 15:55:21 vusolo2 user.warn kernel: [AUD]: Mute : 0

Feb  7 15:55:21 vusolo2 daemon.debug CCcam: EMM: not interested in 1805:000000

Feb  7 15:55:21 vusolo2 daemon.debug CCcam: EMM: not interested in 1802:000000

Feb  7 15:55:21 vusolo2 daemon.debug CCcam: EMM: not interested in 1803:000000

Feb  7 15:55:21 vusolo2 daemon.debug CCcam: EMM: not interested in 0100:000000

Feb  7 15:55:21 vusolo2 daemon.debug CCcam: EMM: not interested in 0100:0000B1

Feb  7 15:55:21 vusolo2 daemon.debug CCcam: EMM: not interested in 1804:000000

Feb  7 15:55:30 vusolo2 authpriv.info login[1406]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)

Feb  7 15:55:30 vusolo2 authpriv.notice login[1410]: ROOT LOGIN  on '/dev/pts/0' from '[::ffff:192.168.0.99]:17020'

Feb  7 15:56:23 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6506832 

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6506832 0 aph=0x0

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0

Feb  7 15:56:23 vusolo2 user.warn kernel: FE tune

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0 

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 1 

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: downmix 0 state : 0

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6506832 

Feb  7 15:56:23 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6506832 decoder start : 0

Feb  7 15:56:23 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0

Feb  7 15:56:23 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0 

Feb  7 15:56:23 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6506832  0

Feb  7 15:56:23 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6506832  2 2

Feb  7 15:56:23 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1

Feb  7 15:56:23 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1

Feb  7 15:56:24 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6506832  1 

Feb  7 15:56:24 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6506832 1 aph=0xcaccc480

Feb  7 15:56:24 vusolo2 user.warn kernel: [AUD]: Mute : 0

Feb  7 15:56:24 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0

Feb  7 15:56:24 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 0

Feb  7 15:56:24 vusolo2 user.warn kernel: !!!^M[DMX]: paserband_remove_pid pid 0xa27 not found

Feb  7 15:56:24 vusolo2 daemon.debug CCcam: EMM: not interested in 0919:000000

Feb  7 15:56:24 vusolo2 daemon.debug CCcam: EMM: not interested in 093B:000000

Feb  7 15:56:24 vusolo2 daemon.debug CCcam: EMM: not interested in 09CD:000000

Feb  7 15:56:30 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1

Feb  7 15:56:30 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6506832 

Feb  7 15:56:31 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6506832 0 aph=0x0

Feb  7 15:56:31 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0

[Rendal-Raines]

after black screen and run spinner.

 

remothe control do not responde

[athoik]

There is nothing on dmesg. Can you create an enigma2 log?

init 4
enigma2 2>/tmp/e2.log

[Rendal-Raines]

+ (1) Background File Eraser

+ (5) Tuxtxt

+ (8) graphics acceleration manager

+ (9) GFBDC

12150k video mem

setting /dev/tty0 status failed.

 - double buffering available!

4050kB available for acceleration surfaces.

resolution: 1280 x 720 x 32 (stride: 5760)

+ (9) gLCDDC

/dev/fb1: No such file or directory

found OLED display!

lcd buffer 0x7ce210 8448 bytes, stride 132

LCD resolution: 132 x 64 x 8 (stride: 132)

+ (9) Font Render Class

[FONT] initializing lib...

[FONT] loading fonts...

[FONT] Intializing font cache, using max. 4MB...

+ (10) gRC

RC thread created successfully

+ (15) eWindowStyleManager

+ (20) DVB-CI UI

+ (20) UHF Modulator

couldnt open /dev/rfmod0!!!!

+ (20) RC Input layer

+ (20) misc options

+ (20) AVSwitch Driver

+ (21) input device driver

Input device "dreambox advanced remote control (native)" is a keyboard

Input device "Realtek RTL2832U reference design" is a remotecontrol

Input device "MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu)" is a keyboard

Found 3 input devices.

+ (22) Hdmi CEC driver

eHdmiCEC: detected physical address change: 1000 --> 0000

eHdmiCEC: send message 84 00 00 03 

+ (30) eActionMap

+ (35) CI Slots

scanning for common interfaces..

CI Slot 0 setSource(0)

eDVBCIInterfaces->setInputSource(0, 0)

eDVBCIInterfaces->setInputSource(1, 1)

done, found 1 common interface slots

+ (35) CA handler

+ (40) eServiceCenter

settings instance.

+ (41) eServiceFactoryDVD

+ (41) eServiceFactoryHDMI

+ (41) eServiceFactoryM2TS

+ (41) eServiceFactoryMP3

+ (41) eServiceFactoryFS

+ (41) eServiceFactoryDVB

+ (41) Encoders

+ (41) Stream server

reached rl 70

---- opening lame channel db

reading services (version 4)

loaded 242 channels/transponders and 3970 services

linking adapter1/frontend0 to vtuner0

scanning for frontends..

opening frontend 0

close frontend 0

opening frontend 1

close frontend 1

opening frontend 2

close frontend 2

found 2 adapter, 3 frontends(3 sim) and 9 demux, boxtype 4

Use valid Linux Time (RTC?)

[EPGC] Initialized EPGCache (wait for setCacheFile call now)

Loading spinners...

[ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png

found 6 spinner!

setIoPrio best-effort level 3 ok

couldn't open /proc/stb/misc/12V_output

[Harddisk] enumerating block devices...

new Harddisk sda -> /dev/sda -> /dev/sda

[Harddisk] enumerating network mounts...

Reading satellites.xml

main thread is non-idle! display spinner!

Reading cables.xml

Reading terrestrial.xml

removing internal link on frontend id 0

sec config cleared

setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes

setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes

setSlotInfo for dvb frontend 2 to slotid 2, descr RTL2838UHIDIR, need rotorworkaround No, enabled Yes, DVB-S2 No

slot: 0 configmode: simple

diseqcmode:  single

slot: 1 configmode: simple

diseqcmode:  single

sec config completed

[NimManager] slotname = A, slotdescription = BCM7356 DVB-S2 NIM (internal), multitype = False

[NimManager] slotname = B, slotdescription = BCM7356 DVB-S2 NIM (internal), multitype = False

[NimManager] slotname = C, slotdescription = RTL2838UHIDIR, multitype = False

loading bouquet... /etc/enigma2//bouquets.tv

loading bouquet... /etc/enigma2//userbouquet.vh01.tv

208 entries in Bouquet userbouquet.vh01.tv

loading bouquet... /etc/enigma2//userbouquet.vh02.tv

207 entries in Bouquet userbouquet.vh02.tv

loading bouquet... /etc/enigma2//userbouquet.vh03.tv

494 entries in Bouquet userbouquet.vh03.tv

loading bouquet... /etc/enigma2//userbouquet.vh04.tv

379 entries in Bouquet userbouquet.vh04.tv

loading bouquet... /etc/enigma2//userbouquet.vh05.tv

96 entries in Bouquet userbouquet.vh05.tv

loading bouquet... /etc/enigma2//userbouquet.vh06.tv

85 entries in Bouquet userbouquet.vh06.tv

loading bouquet... /etc/enigma2//userbouquet.vh09.tv

279 entries in Bouquet userbouquet.vh09.tv

loading bouquet... /etc/enigma2//userbouquet.vh07.tv

227 entries in Bouquet userbouquet.vh07.tv

loading bouquet... /etc/enigma2//userbouquet.vh08.tv

228 entries in Bouquet userbouquet.vh08.tv

loading bouquet... /etc/enigma2//userbouquet.vh10.tv

376 entries in Bouquet userbouquet.vh10.tv

loading bouquet... /etc/enigma2//userbouquet.vh11.tv

186 entries in Bouquet userbouquet.vh11.tv

loading bouquet... /etc/enigma2//userbouquet.vh12.tv

129 entries in Bouquet userbouquet.vh12.tv

loading bouquet... /etc/enigma2//userbouquet.vh13.tv

144 entries in Bouquet userbouquet.vh13.tv

loading bouquet... /etc/enigma2//userbouquet.vh14.tv

114 entries in Bouquet userbouquet.vh14.tv

loading bouquet... /etc/enigma2//userbouquet.vh15.tv

92 entries in Bouquet userbouquet.vh15.tv

loading bouquet... /etc/enigma2//userbouquet.vh16.tv

131 entries in Bouquet userbouquet.vh16.tv

loading bouquet... /etc/enigma2//userbouquet.vh17.tv

1 entries in Bouquet userbouquet.vh17.tv

loading bouquet... /etc/enigma2//userbouquet.vh18.tv

18 entries in Bouquet userbouquet.vh18.tv

loading bouquet... /etc/enigma2//userbouquet.vh19.tv

105 entries in Bouquet userbouquet.vh19.tv

loading bouquet... /etc/enigma2//userbouquet.vh20.tv

25 entries in Bouquet userbouquet.vh20.tv

loading bouquet... /etc/enigma2//userbouquet.vh21.tv

292 entries in Bouquet userbouquet.vh21.tv

loading bouquet... /etc/enigma2//userbouquet.vh22.tv

216 entries in Bouquet userbouquet.vh22.tv

loading bouquet... /etc/enigma2//userbouquet.vh23.tv

162 entries in Bouquet userbouquet.vh23.tv

loading bouquet... /etc/enigma2//userbouquet.vh24.tv

46 entries in Bouquet userbouquet.vh24.tv

loading bouquet... /etc/enigma2//userbouquet.vh25.tv

103 entries in Bouquet userbouquet.vh25.tv

loading bouquet... /etc/enigma2//userbouquet.vh26.tv

14 entries in Bouquet userbouquet.vh26.tv

loading bouquet... /etc/enigma2//userbouquet.vh27.tv

66 entries in Bouquet userbouquet.vh27.tv

loading bouquet... /etc/enigma2//userbouquet.vh28.tv

76 entries in Bouquet userbouquet.vh28.tv

loading bouquet... /etc/enigma2//userbouquet.vh29.tv

191 entries in Bouquet userbouquet.vh29.tv

loading bouquet... /etc/enigma2//userbouquet.vh30.tv

43 entries in Bouquet userbouquet.vh30.tv

loading bouquet... /etc/enigma2//userbouquet.vh31.tv

5 entries in Bouquet userbouquet.vh31.tv

loading bouquet... /etc/enigma2//userbouquet.vh32.tv

135 entries in Bouquet userbouquet.vh32.tv

loading bouquet... /etc/enigma2//userbouquet.vh33.tv

1 entries in Bouquet userbouquet.vh33.tv

loading bouquet... /etc/enigma2//userbouquet.vh34.tv

332 entries in Bouquet userbouquet.vh34.tv

loading bouquet... /etc/enigma2//userbouquet.vh35.tv

143 entries in Bouquet userbouquet.vh35.tv

loading bouquet... /etc/enigma2//userbouquet.vh36.tv

60 entries in Bouquet userbouquet.vh36.tv

loading bouquet... /etc/enigma2//userbouquet.vh37.tv

307 entries in Bouquet userbouquet.vh37.tv

loading bouquet... /etc/enigma2//userbouquet.vh38.tv

196 entries in Bouquet userbouquet.vh38.tv

loading bouquet... /etc/enigma2//userbouquet.vh39.tv

226 entries in Bouquet userbouquet.vh39.tv

loading bouquet... /etc/enigma2//userbouquet.vh40.tv

61 entries in Bouquet userbouquet.vh40.tv

loading bouquet... /etc/enigma2//userbouquet.vh41.tv

76 entries in Bouquet userbouquet.vh41.tv

loading bouquet... /etc/enigma2//userbouquet.vh42.tv

27 entries in Bouquet userbouquet.vh42.tv

loading bouquet... /etc/enigma2//userbouquet.vh43.tv

31 entries in Bouquet userbouquet.vh43.tv

loading bouquet... /etc/enigma2//userbouquet.vh44.tv

28 entries in Bouquet userbouquet.vh44.tv

loading bouquet... /etc/enigma2//userbouquet.vh45.tv

28 entries in Bouquet userbouquet.vh45.tv

loading bouquet... /etc/enigma2//userbouquet.vh46.tv

17 entries in Bouquet userbouquet.vh46.tv

loading bouquet... /etc/enigma2//userbouquet.vh47.tv

6 entries in Bouquet userbouquet.vh47.tv

loading bouquet... /etc/enigma2//userbouquet.vh48.tv

89 entries in Bouquet userbouquet.vh48.tv

loading bouquet... /etc/enigma2//userbouquet.vh208.tv

208 entries in Bouquet userbouquet.vh208.tv

loading bouquet... /etc/enigma2//userbouquet.favourites.tv

0 entries in Bouquet userbouquet.favourites.tv

50 entries in Bouquet bouquets.tv

loading bouquet... /etc/enigma2//bouquets.radio

loading bouquet... /etc/enigma2//userbouquet.vh01.radio

57 entries in Bouquet userbouquet.vh01.radio

loading bouquet... /etc/enigma2//userbouquet.vh02.radio

43 entries in Bouquet userbouquet.vh02.radio

loading bouquet... /etc/enigma2//userbouquet.vh03.radio

273 entries in Bouquet userbouquet.vh03.radio

loading bouquet... /etc/enigma2//userbouquet.vh04.radio

186 entries in Bouquet userbouquet.vh04.radio

loading bouquet... /etc/enigma2//userbouquet.favourites.radio

0 entries in Bouquet userbouquet.favourites.radio

5 entries in Bouquet bouquets.radio

Renumbering...

[Time By]: Transponder

[EPGC] time updated.. but cache file not set yet.. dont start epg!!

[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)

[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)

[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)

[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)

[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)

[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)

[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)

[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.MySkin.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.MySkin.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.MySkin.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.MySkin.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.MySkin.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml

[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml

[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)

[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)

[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)

[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)

[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_title)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_button)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_clock)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_large)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (global_small)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_menu)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_label)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_text)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (screen_info)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (epg_event)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_text)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_info)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (infobar_event)

[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (infobar_text)

[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf...OK (Subs)

[FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf...OK (Subsi)

[FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf...OK (Subsb)

[FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf...OK (Subsz)

[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)

[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >

Unknown device type: Realtek RTL2832U reference design

[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >

[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >

Activating keymap: German keyboard

Activating language Italiano

[VideoMode] setting aspect: 16:9

[VideoMode] setting wss: auto

[VideoMode] setting policy: bestfit

[VideoMode] setting policy2: scale

cannot open /proc/stb/avs/0/input_choices

[VideoMode] setting scaler_sharpness to: 0000000D

[VideoMode] setMode - port: HDMI, mode: 1080p, rate: 50Hz

[EPGC Load] Poller disabled.

[EPGC Save] Poller disabled.

[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'

[EPGC] time updated.. start EPG Mainloop

[EPGC] 4732 events read from /etc/enigma2/epg.dat

setLCDBrightness 25

setLCDBrightness 127

Setting OSD position: 0 720 0 576

Setting OSD alpha: 255

Setting 3D mode: auto

Setting 3D depth: 50

[EPGC Save] Poller disabled.

[EPGC Load] Poller disabled.

FIXME: request for unknown slot

FIXME: request for unknown slot

FIXME: request for unknown slot

[Ipkg] Added to OPKG destinations: /

[Info-Panel] machinebrand: Vu+

[Info-Panel] machinename: Solo²

[Info-Panel] oem name: vuplus

[Info-Panel] boxtype: vusolo2

Plugin  Extensions/WebInterface failed to load: No module named plugin

No 'mechanize' module

--> setting contrast to: 00008000

--> setting saturation to: 00008000

--> setting hue to: 00008000

--> setting brightness to: 00008000

--> setting block_noise_reduction to: 00000000

--> setting mosquito_noise_reduction to: 00000000

--> setting digital_contour_removal to: 00000000

--> setting splitmode to: off

--> setting sharpness to: 00000000

--> setting auto_flesh to: 00000000

--> setting green_boost to: 00000000

--> setting blue_boost to: 00000000

--> setting dynamic_contrast to: 00000000

--> setting color_soace to: Edid(Auto)

--> setting scaler_vertical_dejagging to: disable

--> setting smooth to: disable

--> applying pep values

<RemoteControlCode> Write Remote Control Code : 2

[AutoTimer] Auto Poll Enabled

[CI_Assignment] activating ci configs:

[CI_Activate] FOUND 1 CI Slots 

[CI_Activate_Config_CI0] no config file found

[CI_Activate_Config_CI0] error parsing xml...

[TranscodingSetup] set /proc/stb/encoder/enable to enable

[TranscodingSetup] set /proc/stb/encoder/0/bitrate to 400000

[TranscodingSetup] set /proc/stb/encoder/0/framerate to 50000

starting hotplug handler

[NAVIGATION] wasTimerWakeup = False

Setvolume: 100 100 (raw)

Setvolume: 0 0 (-1db)

EMC: +++ EMC V3.7.4beta20131015 startup

[EMC] checkImg is not Vti cannot import name BT_FIXRATIO

[AutoBouquetsMaker] AutoStart Enabled

[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Sab 07 Feb 2015 23:11:24 CET

[(100, <class 'Screens.InfoBar.InfoBar'>)]

MetrixHDWeatherStandalone lookup for ID 709838

warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>

warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>

[SCREENNAME]  RdsInfoDisplaySummary

warning, skin is missing element From in <class 'Screens.Dish.Dish'>

warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>

warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>

warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>

warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>

warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>

warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>

warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>

[Skin] Attribute not implemented: haligh value: center

warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>

warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>

warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>

warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>

warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>

RemovePopup, id = ZapError

MetrixHDWeatherStandalone lookup for ID 709838

[SCREENNAME]  RdsInfoDisplay

[SCREENNAME]  InfoBarSummary

[SCREENNAME]  InfoBar

setValue 70

Setvolume: 70 70 (raw)

Setvolume: 19 19 (-1db)

lastshutdown=False (True = last shutdown was OK)

NOK shutdown action=normal

bootup action=normal

killall: showiframe: no process killed

[LogManager] Trim Poll Started

[LogManager] Trash Poll Started

[LogManager] probing folders

[LogManager] found following log's: ['/home/root/logs']

[LogManager] looking in: /home/root/logs

[NTP]: setting E2 time: 1423347087.03

playing 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[SCREENNAME]  InfoBar

setPixmapNum(0) failed! defined pixmaps: []

setPixmapNum(0) failed! defined pixmaps: []

RemovePopup, id = ZapError

allocate channel.. 19c8:fbff

opening frontend 0

(0)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 0 Freq 12034000 Pol 1 SR 29900000 INV 2 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0

tuning to 1434 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

allocate demux

[CAMSTARTER] Start/Check: 1

2015-02-07 23:11:27.326158

[CAMSTARTER] CAM 1 is Running, active cam 1: oscam emu modern v1105

2015-02-07 23:11:27.411356

[CAMSTARTER] CAM 2 is Running, active cam 2: CCcam 2.3.0

[CAMSTARTER] Cam is running, exit camstarter

poll: unhandled POLLERR/HUP/NVAL for fd 39(17)

poll: unhandled POLLERR/HUP/NVAL for fd 43(16)

job Components.Task.Job name=LogManager #tasks=1 completed with [] in None

[SEC] set static current limiting

[SEC] invalidate current switch params

[SEC] setVoltage 1

[SEC] sleep 10ms

[SEC] setTone 1

[SEC] sleep 10ms

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 0

(0)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

0.0.0.0

192.168

SerienRecorder plugin not found

ER plugin not found

[OpenWebif] no plugins to load

[OpenWebif] started on 80

poll: unhandled POLLERR/HUP/NVAL for fd 41(16)

(0)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x26f0cd8 running

[eEPGCache] channel 0x26f0cd8 running

[EPGC] next update in 2 sec

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (00a0), and 1 audio stream(s) (0190), and the pcr pid is 00a0, and the text pid is 01d6

allocate demux

decoder state: play, vpid=160, apid=400

DMX_SET_PES_FILTER(0xa0) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x190) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(1) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 0 - ok

DMX_SET_PES_FILTER(0xa0) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x1d6) - ttx - ok

DEMUX_START - ttx - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

AUDIO_CHANNEL_SELECT(0) - ok

disable teletext subtitles page ffffffffffffffff (und)

setPixmapNum(0) failed! defined pixmaps: []

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[Volume Adjust] New Channel

[Volume Adjust] oldvol = 0

[eDVBCAService] new service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

RemovePopup, id = ZapError

PATready

use pmtpid 0454 for service_id 2b5d

[eDVBLocalTimerHandler] diff is 0

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

eventNewProgramInfo 0 0

have 1 video stream(s) (00a0), and 2 audio stream(s) (0190, 0191), and the pcr pid is 00a0, and the text pid is 01d6

decoder state: play, vpid=160, apid=400

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[eDVBCIInterfaces] gotPMT

[SEC] set dynamic current limiting

[Dish] tuning failed

EMC: Setting EPG language: it_IT

sdt update done!

[VLC] Checking for buildin servicets ...  no

[VLC] Checking for existing and usable servicets.so ...  No module named servicets

[VLC] Checking for usable gstreamer service ...  yes

[EPGC] start caching events(1423347089)

EMC: Next trashcan cleanup in 109 minutes

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

EMC: [EMCMS] trashcan cleanup: no trashcan...

1 67 1

KEY: 103 0 KEY_UP UP 2015-02-07 23:11:33.881514

action ->  InfobarChannelSelection switchChannelUp

[SCREENNAME]  ['ChannelSelection_summary', 'SimpleSummary']

[SCREENNAME]  ChannelSelection

0 67 1

KEY: 103 1 KEY_UP UP 2015-02-07 23:11:34.220744

1 192 1

KEY: 402 0 KEY_CHANNELUP BOUQUET+ 2015-02-07 23:11:36.520888

action ->  ChannelSelectBaseActions nextBouquet

[EPGC] abort non avail schedule reading

[EPGC] abort non avail schedule other reading

[EPGC] abort non avail netmed schedule reading

[EPGC] abort non avail netmed schedule other reading

[EPGC] abort non avail FreeSat schedule_other reading

[EPGC] abort non avail viasat reading

[EPGC] nownext finished(1423347096)

[EPGC] stop caching events(1423347096)

[EPGC] next update in 60 min

0 192 1

KEY: 402 1 KEY_CHANNELUP BOUQUET+ 2015-02-07 23:11:36.645933

1 6c 1

KEY: 108 0 KEY_DOWN DOWN 2015-02-07 23:11:37.701625

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:38.347896

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:38.455492

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:38.563196

2 6c 1

KEY: 108 3 KEY_DOWN DOWN 2015-02-07 23:11:38.671001

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:38.672449

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:38.778563

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:38.886368

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:38.994010

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:39.101744

2 6c 1

KEY: 108 2 KEY_DOWN DOWN 2015-02-07 23:11:39.209481

0 6c 1

KEY: 108 1 KEY_DOWN DOWN 2015-02-07 23:11:39.333978

1 160 1

KEY: 352 0 KEY_OK OK 2015-02-07 23:11:40.741516

action ->  OkCancelActions ok

playing 1:0:19:1BE4:384:110:EEEE0000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

[eDVBCAService] free service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

start release channel timer

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

setPixmapNum(0) failed! defined pixmaps: []

setPixmapNum(0) failed! defined pixmaps: []

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x26f0cd8

[eEPGCache] remove channel 0x26f0cd8

allocate channel.. 0384:0110

opening frontend 2

(2)tune

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:1BE4:384:110:EEEE0000:0:0:0:

allocate demux

[SCREENNAME]  InfoBarSummary

0 160 1

KEY: 352 1 KEY_OK OK 2015-02-07 23:11:41.403211

[SEC] startTuneTimeout 5000

[SCREENNAME]  InfoBar

[SEC] setVoltage 0

[SEC] setFrontend 1

setting frontend 2

(2)fe event: status 0, inversion off, m_tuning 1

[DVBCAHandler] no more services

(2)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x28028b8 running

[eEPGCache] channel 0x28028b8 running

[EPGC] next update in 2 sec

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (05a0), and 1 audio stream(s) (05a5), and the pcr pid is 05a0, and the text pid is ffffffff

allocate demux

decoder state: play, vpid=1440, apid=1445

DMX_SET_PES_FILTER(0x5a0) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x5a5) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0x5a0) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles page ffffffffffffffff (und)

setPixmapNum(0) failed! defined pixmaps: []

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[Volume Adjust] New Channel

[Volume Adjust] oldvol = 0

[eDVBCAService] new service 1:0:19:1BE4:384:110:EEEE0000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:19:1BE4:384:110:EEEE0000:0:0:0:

RemovePopup, id = ZapError

PATready

use pmtpid 00f0 for service_id 1be4

eventNewProgramInfo 0 0

have 1 video stream(s) (05a0), and 1 audio stream(s) (05a5), and the pcr pid is 05a0, and the text pid is ffffffff

decoder state: play, vpid=1440, apid=1445

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[eDVBCIInterfaces] gotPMT

[Dish] tuning failed

[eDVBLocalTimerHandler] diff is -1

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] set RTC Time

[eDVBLocalTimerHandler] update RTC

[eDVBLocalTimerHandler] time update to 23:11:42

[eDVBLocalTimerHandler] m_time_difference is -1

[eDVBLocalTimerHandler] set Linux Time

sdt update done!

close frontend 0

VIDEO_GET_EVENT - ok

[EPGC] start caching events(1423347104)

AITready

[VideoMode] setting aspect: 16:9

[VideoMode] setting wss: auto

[VideoMode] setting policy: bestfit

[VideoMode] setting policy2: scale

1 b 1

KEY: 11 0 KEY_0 0 2015-02-07 23:11:50.801667

playing 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:1BE4:384:110:EEEE0000:0:0:0:

[eDVBCAService] free service 1:0:19:1BE4:384:110:EEEE0000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

start release channel timer

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[SCREENNAME]  InfoBar

setPixmapNum(0) failed! defined pixmaps: []

setPixmapNum(0) failed! defined pixmaps: []

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x28028b8

[eEPGCache] remove channel 0x28028b8

[EPGC] abort caching events !!

allocate channel.. 19c8:fbff

opening frontend 0

(0)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 0 Freq 12034000 Pol 1 SR 29900000 INV 2 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0

tuning to 1434 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

allocate demux

[SEC] set static current limiting

[SEC] invalidate current switch params

[SEC] setVoltage 1

[SEC] sleep 10ms

[SEC] setTone 1

[SEC] sleep 10ms

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 0

(0)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

(0)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x28028b8 running

[eEPGCache] channel 0x28028b8 running

[EPGC] next update in 59 min

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (00a0), and 1 audio stream(s) (0190), and the pcr pid is 00a0, and the text pid is 01d6

allocate demux

decoder state: play, vpid=160, apid=400

DMX_SET_PES_FILTER(0xa0) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x190) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(1) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 0 - ok

DMX_SET_PES_FILTER(0xa0) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x1d6) - ttx - ok

DEMUX_START - ttx - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles page ffffffffffffffff (und)

setPixmapNum(0) failed! defined pixmaps: []

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[Volume Adjust] New Channel

[Volume Adjust] oldvol = 0

[eDVBCAService] new service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

RemovePopup, id = ZapError

0 b 1

KEY: 11 1 KEY_0 0 2015-02-07 23:11:51.403229

PATready

use pmtpid 0454 for service_id 2b5d

eventNewProgramInfo 0 0

have 1 video stream(s) (00a0), and 2 audio stream(s) (0190, 0191), and the pcr pid is 00a0, and the text pid is 01d6

decoder state: play, vpid=160, apid=400

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

[SEC] set dynamic current limiting

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

[eDVBLocalTimerHandler] diff is 0

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

[Dish] tuning failed

[Volume Adjust] Update Info

[Volume Adjust] Volume = 70

[Volume Adjust] load xml...

VIDEO_GET_EVENT - ok

[VideoMode] setting aspect: 16:9

[VideoMode] setting wss: auto

[VideoMode] setting policy: bestfit

[VideoMode] setting policy2: scale

sdt update done!

close frontend 2

1 b 1

KEY: 11 0 KEY_0 0 2015-02-07 23:11:56.321184

playing 1:0:19:1BE4:384:110:EEEE0000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

[eDVBCAService] free service 1:0:1:2B5D:19C8:FBFF:820000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

start release channel timer

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[SCREENNAME]  InfoBar

setPixmapNum(0) failed! defined pixmaps: []

setPixmapNum(0) failed! defined pixmaps: []

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x28028b8

[eEPGCache] remove channel 0x28028b8

allocate channel.. 0384:0110

opening frontend 2

main thread is non-idle! display spinner!

[Rendal-Raines]

 up x athoik

[athoik]

There is no error in the ouput.

I suggest to plug the usb stick on another machine (eg PC with linux or Windows) and check that is fully working.

[tension]

Ah ah,

opening frontend 2
main thread is non-idle! display spinner!

same problem with 2 others dvb-t stick, 9015 and 9035 driver, vuduo. On tuner change, not channel change. the problem occurs only when switching to dvb-t tuner

Random, only reboot solves. Kernel or enigma2 issue?

Edited by tension, 9 February 2015 - 22:15.

[Rendal-Raines]

reboot solves

and change channel dtt a sat is crash

[basilico]

Rendal-Raines:

which version of openpli 4 what year?