39 replies to this topic

[Huevos]

Put the PY in the directory and restart. Then delete the PY. Will overwrite the PYO.

 

My personal opinion is a tuner that is set up in this crippled fashion should be avoided for anything but an emergency. Certainly wouldn't be recommending this for being committed.

 

Much better would be set up a fixed dish for major positions on both tuners and just have the motor connected as an extra on one of those tuners. Or even better have an independent motorized dish on each tuner, combined with fixed dishes for fast zapping.

[Robinson]

Put the PY in the directory and restart. Then delete the PY. Will overwrite the PYO.

Huevos, when I now go to Satfinder, I am now able to change to tuner B.

However, when I press KEY_DOWN to choose a satellite, the field is empty - there are no satellites to choose from and so this is probably why I get a green screen:

<?xml version="1.0" encoding="utf-8"?>
<openpli>
	<enigma2>
		<crashdate>śro lut 18 22:15:11 2015</crashdate>
		<compiledate>Sep 25 2014</compiledate>
		<contactemail>forum at www.openpli.org</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>PLi-HD/skin.xml</skin>
		<sourcedate>2014-09-24</sourcedate>
		<branch>(no branch)</branch>
		<rev>f18dc36</rev>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>et9000</stbmodel>
		<kernelversion>
			<![CDATA[
Linux et9x00 3.8.7 #1 SMP Mon Mar 10 03:05:36 CET 2014 mips GNU/Linux
]]>
		</kernelversion>
		<kernelcmdline> bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=null consoleblank=0</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<!-- No such file or directory -->
		</imageversion>
		<imageissue>
			<![CDATA[
openpli 4 %h

]]>
		</imageissue>
	</image>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
rbouquet.dbe08.tv
loading bouquet... /etc/enigma2//userbouquet.dbe00.tv
189 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2//userbouquet.dbe01.tv
90 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2//userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
1 entries in Bouquet userbouquet.LastScanned.tv
17 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2//bouquets.radio
loading bouquet... /etc/enigma2//userbouquet.dbe00.radio
12 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2//userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
Renumbering...
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
Unknown device type: front panel
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Polski
--> setting scaler_sharpness to: 0000000D
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
FIXME: request for unknown slot
FIXME: request for unknown slot
[EPGImport] fallback to default translation for  Wake up and import
[EPGImport] fallback to default translation for  Skip the import
[EPGImport] fallback to default translation for  Automated EPG Importer
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for setup for Quickbutton
tuxtxt.otb
tuxtxt.ttf
ae_AlMateen.ttf
lcd.ttf
andale.ttf
valis_enigma.ttf
nmsbd.ttf
md_khmurabi_10.ttf

[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TSmedia/interface/font_default.otf...OK (RegularIPTV)
[AudioSync] fallback to default translation for  Audio Sync Setup
[AudioSync] fallback to default translation for  Setup for the Audio Sync Plugin
[AudioSync] fallback to default translation for  Audio Sync
[AudioSync] fallback to default translation for  sets the Audio Delay (LipSync)
[AutoMount.py] self.automounts without mounts {}
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
setMode - port: DVI mode: 1080i rate: multi
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
[EPGImport] autostart (0) occured at 47.120278
starting hotplug handler
[TIMER] record time changed, start prepare is now: Fri Feb 20 13:52:40 2015
set rotor timeout to 360 seconds
[Timer] Record RecordTimerEntry(name=Bargain Hunt, begin=Fri Feb 20 13:53:00 2015, serviceref=1:0:1:1044:1000:1:CFDACE7:0:0:0:, justplay=1)
[TIMER] record time changed, start prepare is now: Fri Feb 20 13:54:40 2015
[Timer] Record RecordTimerEntry(name=BBC News; Weather, begin=Fri Feb 20 13:55:00 2015, serviceref=1:0:1:1044:1000:1:CFDACE7:0:0:0:, justplay=0)
[EPGImport] autostart (0) occured at 47.401369
[EPGImport] WakeUpTime now set to 27930 (now=47)
[EPGC] setCacheFile read/write epg data from/to '/media/KINGSTON/epg.dat'
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[Quickbutton] fallback to default translation for Assign plugin to long green key pressed
[Quickbutton] fallback to default translation for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
RemovePopup, id = ZapError
setValue 25
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
playing 1:0:1:7D3:22C4:13E:820000:0:0:0:
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
not pauseable.
not pauseable.
not pauseable.
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
allocate channel.. 22c4:013e
opening frontend 0
(0)tune
Entry for 13,0? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 20.783001, 13.000000 degrees
PolarmountHourAngle=188.622771
RotorCmd = d08a
RotorCmd d08a, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 1 Freq 12476000 Pol 0 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1876 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7D3:22C4:13E:820000:0:0:0:
allocate demux
eHdmiCEC: received message 8C 
eHdmiCEC: send message 87 00 00 00 
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(17)
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
[SEC] set static current limiting
eHdmiCEC: received message 8C 
eHdmiCEC: send message 87 00 00 00 
set sequence pos 3
eHdmiCEC: received message 8C 
eHdmiCEC: send message 87 00 00 00 
[SEC] setVoltage 1
[SEC] sleep 900ms
0.0.0.0
192.168
nameservers: [[95, 160, 170, 92], [88, 156, 222, 92]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 106], 'up': True, 'mac': '00:16:b4:03:9f:97', 'dhcp': True, 'bcast': [255, 255, 255, 255], 'netmask': [255, 255, 0, 0], 'gateway': [192, 168, 1, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 20000
[OpenWebif] started on 443
[OpenWebif] started stream listening on port 80
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ed08a(?)
[SEC] sleep 1000ms
[SEC] sleep 2000ms
[SEC] setVoltage 2
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 4 ok
ok > 4 .. goto 3

set sequence pos 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1d4aed0 running
[eEPGCache] channel 0x1d4aed0 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (07ef), and 1 audio stream(s) (07f0), and the pcr pid is 07ef, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=2031, apid=2032
DMX_SET_PES_FILTER(0x7ef) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7f0) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x7ef) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
[eDVBCAService] new service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:7D3:22C4:13E:820000:0:0:0:
RemovePopup, id = ZapError
[SEC] update current rotorparams 1435 d08a 130
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
PATready
use pmtpid 07ee for service_id 07d3
eventNewProgramInfo 0 0
have 1 video stream(s) (07ef), and 1 audio stream(s) (07f0), and the pcr pid is 07ef, and the text pid is ffffffff
decoder state: play, vpid=2031, apid=2032
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
sdt update done!
[Dish] tuning failed
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 22:14:04
[eDVBLocalTimerHandler] m_time_difference is 1424293988
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
main thread is non-idle! display spinner!
[EPGC] 313792 events read from /media/KINGSTON/epg.dat
[EPGC] next update in 2 sec
[EPGC] start caching events(1424294065)
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail virgin nownext reading
[EPGC] abort non avail virgin schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
action ->  InfobarShowHideActions toggleShow
action ->  InfobarShowHideActions hide
action ->  InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
action ->  OkCancelActions ok
okbuttonClick
key_red_choice: 0
action ->  OkCancelActions cancel
action ->  OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
SoftwareUpdate UpdatePlugin
action ->  OkCancelActions ok
okbuttonClick
Satconfig NimSelection
ScanSetup ScanSimple
ScanSetup ScanSetup
action ->  OkCancelActions ok
okbuttonClick
ID:  0
action ->  SetupActions cancel
ignore request to play already running service(1)
action ->  OkCancelActions ok
okbuttonClick
[Skin] Error: {PLi-HD/skin.xml}: color 'un808888' must be #aarrggbb or valid named color. Please contact the skin's author!
[Skin] Error: {PLi-HD/skin.xml}: color 'un808888' must be #aarrggbb or valid named color. Please contact the skin's author!
warning, skin is missing element header in <class 'Plugins.SystemPlugins.Satfinder.plugin.Satfinder'>
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:7D3:22C4:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
[eDVBLocalTimerHandler] remove channel 0x1d4aed0
[eEPGCache] remove channel 0x1d4aed0
tuning to transponder with data (12476, 29900, 0, 3, 2, 130, 1, 2, 2, 2)
(0)tune
Entry for 13,0? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 20.783001, 13.000000 degrees
PolarmountHourAngle=188.622771
RotorCmd = d08a
RotorCmd d08a, lastRotorCmd d08a
prepare_sat System 1 Freq 12476000 Pol 0 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1876 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[SEC] set dynamic current limiting
[DVBCAHandler] no more services
action ->  SetupActions right
unknown action SetupActions/right! typo in keymap?
action ->  SetupActions right
another satpos depending frontend is in use.. so allocateFrontendByIndex not possible!
opening frontend 1
tuning to transponder with data (12476, 29900, 0, 3, 2, 130, 1, 2, 2, 2)
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12476000 Pol 0 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1876 mhz
OURSTATE: tuning
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
(1)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(1)fe event: status 20, inversion off, m_tuning 2
FE_TIMEDOUT! ..abort
OURSTATE: failed, fatal
close frontend 0
action ->  SetupActions left
unknown action SetupActions/left! typo in keymap?
action ->  SetupActions left
another satpos depending frontend is in use.. so allocateFrontendByIndex not possible!
opening frontend 0
tuning to transponder with data (12476, 29900, 0, 3, 2, 130, 1, 2, 2, 2)
(0)tune
Entry for 13,0? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 20.783001, 13.000000 degrees
PolarmountHourAngle=188.622771
RotorCmd = d08a
RotorCmd d08a, lastRotorCmd d08a
prepare_sat System 1 Freq 12476000 Pol 0 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1876 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[SEC] set dynamic current limiting
close frontend 1
action ->  SetupActions right
unknown action SetupActions/right! typo in keymap?
action ->  SetupActions right
another satpos depending frontend is in use.. so allocateFrontendByIndex not possible!
opening frontend 1
tuning to transponder with data (12476, 29900, 0, 3, 2, 130, 1, 2, 2, 2)
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12476000 Pol 0 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1876 mhz
OURSTATE: tuning
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
(1)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(1)fe event: status 20, inversion off, m_tuning 2
FE_TIMEDOUT! ..abort
OURSTATE: failed, fatal
action ->  SetupActions right
unknown action SetupActions/right! typo in keymap?
action ->  SetupActions right
action ->  SetupActions left
unknown action SetupActions/left! typo in keymap?
action ->  SetupActions left
action ->  SetupActions left
unknown action SetupActions/left! typo in keymap?
action ->  SetupActions left
action ->  SetupActions ok
Add Sat: frequ: 12476 symbol: 29900 pol: 0 fec: 3 inversion: 2 modulation: 2 system: 1 rolloff2 pilot2
orbpos: None
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Satfinder/plugin.py", line 217, in keyGoScan
    self.transponder[9]  # pilot
  File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 794, in addSatTransponder
TypeError: in method 'eDVBFrontendParametersSatellite_orbital_position_set', argument 2 of type 'int'
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x1dcc260>>,('SetupActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>

[Huevos]

I've checked and it was always like this before I ever looked at it. Same in manual scan, Same in blind scan.

[Dimitrij]

The best solution.
Finish recording, scanning what you want.

[Huevos]

The best solution.
Finish recording, scanning what you want.

There's no need for that. Just set the "satposdepends" tuner as preferred tuner for recording. That way as long as the recording is not started on the active service the main tuner will always be available. And E2 won't release it if dish movement is necessary. This is how it works in Satfinder also. If the "satposdepends" tuner is recording and the active Satfinder tuner requires the dish to move a warning will be shown.

Edited by Huevos, 19 February 2015 - 09:05.

[Dimitrij]

 

The best solution.
Finish recording, scanning what you want.

There's no need for that. Just set the "satposdepends" tuner as preferred tuner for recording. That way as long as the recording is not started on the active service the main tuner will always be available. And E2 won't release it if dish movement is necessary. This is how it works in Satfinder also. If the "satposdepends" tuner is recording and the active Satfinder tuner requires the dish to move a warning will be shown.

 

Indeed, the perfect solution .

Edited by Dimitrij, 19 February 2015 - 09:42.

[Robinson]

I've checked and it was always like this before I ever looked at it. Same in manual scan, Same in blind scan.

Probably. I never said it worked in the past. I just hoped something was overlooked and could be modified to enable using tuner B for service scanning.

The same goes for Satscan, Manual scan, Blind scan and Fast scan - it is not possible to select tuner B.

 

The best solution.
Finish recording, scanning what you want.

Sure, but only with tuner A.

I have an attenuator on tuner A and no attenuator on tuner B and it would be very useful to compare signal strengths using Satfinder but it is impossible now.

 

So if the modification suggested by Huevos produces green screen, shall I now use the original plugin.py file (without removing "satposdepends")?

I know I'm being stubborn but wouldn't it be possible to make tuner B see satellite positions from satellites.xml? In this way, maybe I would avoid the green screen?

[Robinson]

By the way, when I look at /etc/enigma2/settings I see the following 3 entries for my tuner B (Nims.1, right?):

 

config.Nims.1.diseqcMode=toneburst_a_b
config.Nims.1.configMode=satposdepends
config.Nims.1.powerMeasurement=false

 

Is this correct for "second cable of a motorized dish"?

Maybe this is what prevents my tuner B from being used for service scanning?

[littlesat]

But at least the GSOD should be avoided...

[Huevos]

But at least the GSOD should be avoided...

The GSoD is only because he edited the code to a non-working version. There is no GSOD in the current code.

[Huevos]

By the way, when I look at /etc/enigma2/settings I see the following 3 entries for my tuner B (Nims.1, right?):

 

config.Nims.1.diseqcMode=toneburst_a_b
config.Nims.1.configMode=satposdepends
config.Nims.1.powerMeasurement=false

 

Is this correct for "second cable of a motorized dish"?

Maybe this is what prevents my tuner B from being used for service scanning?

And the settings for the master tuner are?

[Robinson]

config.Nims.0.turningspeedH=2.7
config.Nims.0.powerMeasurement=false
config.Nims.0.tuningstepsize=0.112
config.Nims.0.configMode=advanced
config.Nims.0.longitude=20.783
config.Nims.0.diseqcMode=positioner
config.Nims.0.latitude=49.683
config.Nims.0.advanced.sats=3605
config.Nims.0.advanced.lnb.1.turningspeedH=2.7
config.Nims.0.advanced.lnb.1.diseqcMode=1_2
config.Nims.0.advanced.lnb.1.powerMeasurement=false
config.Nims.0.advanced.lnb.1.latitude=49.683
config.Nims.0.advanced.lnb.1.tuningstepsize=0.112
config.Nims.0.advanced.lnb.1.longitude=20.783
config.Nims.0.advanced.lnb.1.turningspeedV=2.4
config.Nims.0.advanced.lnb.69.turningspeedH=2.7
config.Nims.0.advanced.lnb.69.powerMeasurement=false
config.Nims.0.advanced.lnb.69.latitude=49.683
config.Nims.0.advanced.lnb.69.tuningstepsize=0.112
config.Nims.0.advanced.lnb.69.longitude=20.783
config.Nims.0.advanced.lnb.69.turningspeedV=2.4
config.Nims.0.advanced.sat.3325.lnb=1
config.Nims.0.advanced.sat.3325.usals=false
config.Nims.0.advanced.sat.3300.rotorposition=2
config.Nims.0.advanced.sat.3300.usals=false
config.Nims.0.advanced.sat.3300.lnb=1
config.Nims.0.advanced.sat.3605.userSatellitesList=[31, 32, 48, 70, 72, 90, 92, 100, 101, 130, 160, 162, 170, 171, 192, 194, 201, 216, 235, 255, 260, 282, 305, 306, 315, 330, 360, 380, 381, 390, 420, 450, 460, 461, 475, 491, 502, 503, 505, 506, 525, 530, 550, 559, 570, 571, 600, 601, 620, 621, 642, 643, 660, 661, 685, 686, 705, 722, 740, 741, 750, 751, 765, 766, 785, 786, 830, 851, 865, 875, 880, 3254, 3255, 3284, 3285, 3354, 3355, 3379, 3380, 3399, 3400, 3419, 3420, 3450, 3459, 3475, 3489, 3490, 3520, 3530, 3549, 3550, 3560, 3591, 3592]
config.Nims.0.advanced.sat.3605.lnb=69
config.Nims.0.turningspeedV=2.4

[Huevos]

Not sure why this is here.

config.Nims.1.diseqcMode=toneburst_a_b

[Robinson]

Shall I remove this entry from settings file and see what happens?

[Huevos]

Is it a direct cable.

[Robinson]

Tuner A - positioner and then twin LNB

Tuner B - twin LNB directly

There are no DiSeqc switches on the way, just an attenuator.

[Huevos]

Strange how that has been added then.

[Robinson]

Do you think I should remove this line or change to something else?

Please note the menu on my ET9000 shows Tuner B as "Second cable of motorized LNB Tuner A".

[Huevos]

How it got there I don't know but it is not causing problems.

[Robinson]

OK, so I just need to revert to the original Satfinder plugin.py?

No way to make tuner B see the satellites?

Attached please find a screenshot of what it looks like when I select tuner B in Satfinder (after the "illegal" modification"):

 

Attached Files

•  screenshot.jpg   45.95KB   0 downloads