For the duo thats indeed the lastest version for now. You can choose to flash that one but once a newer version appears you have to flash again 
BIG upgrade tomorrow (advice: Reflash)
Started by MiLo, 15 Feb 2015 16:36
46 replies to this topic
Re: BIG upgrade tomorrow (advice: Reflash) #21
-
- Senior Member
- 4,157 posts
+198
Excellent
Posted 17 February 2015 - 18:14
@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB
Re: BIG upgrade tomorrow (advice: Reflash) #22
-
- Member
- 24 posts
0
Neutral
Posted 17 February 2015 - 18:47
ok thanks
Re: BIG upgrade tomorrow (advice: Reflash) #23
-
- Senior Member
- 39 posts
+1
Neutral
Posted 17 February 2015 - 21:09
After integrating the mailine OpenEmbedded core changes to fix a few versioning problems, tomorrow upgrade will be huge again. You'll see something like 300+ upgradable packages.
My advise: Reflash, it's much quicker than running through the upgrades.
Why don't people READ?
You were advised to flash in order not to block your own IP (we auto-block when too many downloads happen from one IP), and because our download mirrors can't handle 300 downloads simultaneously from all OpenPLi4 users.
Sorry WanWizard, but even if people READ, and READ once again, there was no mention of such a limitation with your download mirrors (and thus, the reason for reflashing) in the original post from MiLo
Thanks for pointing it out though. Now, people know the reason 
Re: BIG upgrade tomorrow (advice: Reflash) #24
-
- Member
- 4 posts
0
Neutral
Posted 17 February 2015 - 21:35
also , found tt in case to load mgcamd-1.38c from panel of plugins OpenPli , instead upoloding & installing version of mgcamd-1.30d
which not support to view decription infor of source into INFORBAR
tkx
Get the same error, if downloading mgcamd1.38c-ssl1.0 i end upp with old mgcamd1.30d. Get same files if downloading mgcamd1.30d.
Re: BIG upgrade tomorrow (advice: Reflash) #25
-
- Senior Member
- 476 posts
+8
Neutral
Posted 18 February 2015 - 12:02
I did the update and now I can't increase the size of external .srt subtitles.
I used to use size 40 but subtitles now are much smaller.
I increased the value to 46 but the size didn't change.
Re: BIG upgrade tomorrow (advice: Reflash) #26
-
- Member
- 21 posts
+1
Neutral
Posted 18 February 2015 - 12:09
Hello
tkx for update but unfor reflashed dream-800hdse
found a green display while:
Menu --> Infor --> Service
push Blue Botton (Status Tuner) - get green display
hereis last sting of crash-log
action -> ColorActions blue
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/ServiceInfo.py", line 192, in tuner
File "/usr/lib/enigma2/python/Screens/ServiceInfo.py", line 183, in showFrontendData
File "/usr/lib/enigma2/python/Screens/ServiceInfo.py", line 204, in getFEData
KeyError: 'symbol_rate'
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x1a408c8>>,('ColorActions', 'blue')) failed)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
tkx for correction in next updates
also , found tt in case to load mgcamd-1.38c from panel of plugins OpenPli , instead upoloding & installing version of mgcamd-1.30d
which not support to view decription infor of source into INFORBAR
tkx
Tdy update not correct above bug
pls find attached crash-log
tkx in advance , awtg corrections
brgds
Re: BIG upgrade tomorrow (advice: Reflash) #27
-
- Member
- 21 posts
+1
Neutral
Posted 18 February 2015 - 12:10
Re: BIG upgrade tomorrow (advice: Reflash) #28
-
- Member
- 21 posts
+1
Neutral
Posted 18 February 2015 - 12:12
also , found tt in case to load mgcamd-1.38c from panel of plugins OpenPli , instead upoloding & installing version of mgcamd-1.30d
which not support to view decription infor of source into INFORBAR
tkx
Get the same error, if downloading mgcamd1.38c-ssl1.0 i end upp with old mgcamd1.30d. Get same files if downloading mgcamd1.30d.
fyi: mgcamd_1.30d not support crypto-infor into INFO-BAR
simply replaced bin by 1.38c
Re: BIG upgrade tomorrow (advice: Reflash) #29
-
- Senior Member
- 55 posts
+2
Neutral
Posted 18 February 2015 - 12:14
Hello!After today update i can not download mgcamd 1.38(ssl 1.1) on this place is mgcam 1.30d-r5.10.Can someone please check this.Thanks a lot
Re: BIG upgrade tomorrow (advice: Reflash) #30
-
- Senior Member
- 91 posts
0
Neutral
Posted 18 February 2015 - 12:53
I applied the online update and everything went good.
There is no problem, but what is the difference?
Is there any advantages for end users?
Thanks...
Re: BIG upgrade tomorrow (advice: Reflash) #31
-
- Forum Moderator
PLi® Core member - 33,503 posts
+118
Excellent
Posted 18 February 2015 - 13:56
I applied the online update and everything went good.
There is no problem, but what is the difference?
Is there any advantages for end users?
Thanks...
None
No
on the Glassfibre 1GB DVB-C...
Re: BIG upgrade tomorrow (advice: Reflash) #32
-
- PLi® Core member
- 14,055 posts
+298
Excellent
Posted 18 February 2015 - 16:23
Please don't abuse this thread to dump whatever problems you happen to have. Create new threads for new issues.
Real musicians never die - they just decompose
Re: BIG upgrade tomorrow (advice: Reflash) #33
-
- Senior Member
- 157 posts
+10
Neutral
Posted 19 February 2015 - 09:00
Hi, With the latest update continously hangs on reboot VU + Duo. 325 shows the update and everything is progressing well until you restart. Any suggestions?
Re: BIG upgrade tomorrow (advice: Reflash) #34
-
- Senior Member
- 91 posts
0
Neutral
Posted 19 February 2015 - 13:07
I applied the online update and everything went good.
There is no problem, but what is the difference?
Is there any advantages for end users?
Thanks...
None
No
Thank you for your quick reply.
Re: BIG upgrade tomorrow (advice: Reflash) #35
-
- Member
- 4 posts
0
Neutral
Posted 23 February 2015 - 13:40
Re-flashed my duo2 and lost important plugins like system time, blindscan & caminfo.
These doesn't work in this new environment.
Re: BIG upgrade tomorrow (advice: Reflash) #36
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 24 February 2015 - 12:04
Hi,
I have reflashed my ET9000 like adviced with image from the 17 february but since I always have the warning that appears.
How make it dissapears? I no longer need this warning since I reflash and my today update only update 27 packages.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: BIG upgrade tomorrow (advice: Reflash) #37
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 24 February 2015 - 13:40
This message will be removed at a time that we think / hope that most users have been updated concerning the earlier issues.
I expect in a few days.
I expect in a few days.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: BIG upgrade tomorrow (advice: Reflash) #38
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 24 February 2015 - 17:40
OK thanks, I was hoping that this message was "smarter" for exemple by detecting the version of the module "enigma2"
enigma2 - 2.7+git12596+515dd79-r0.0
And pop it up if is version is lower than...
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: BIG upgrade tomorrow (advice: Reflash) #39
-
- Senior Member
- 297 posts
0
Neutral
Posted 2 March 2015 - 11:13
Hello,
Could someone explain why the 22nd of february is now mentioned???
In addition, it is mentioned many dependencies can't be updated..
I understand the "C" linguage has changed again..
It is thus compulsory to flash on more time??
Please clarify..
Thanks..
ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30
Re: BIG upgrade tomorrow (advice: Reflash) #40
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 2 March 2015 - 11:18
If your current image is from before the 22nd, yes. If not, you can simply update on the box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
7 user(s) are reading this topic
0 members, 7 guests, 0 anonymous users
