23 replies to this topic

[hypnos]

Hi, can you tell me please, now is ok transcoding in last build? I read thread build status, but not mention this.

Thank you!

Edited by hypnos, 19 February 2015 - 11:24.

[Erik Slagter]

I don't understand what you mean. Transcoding has been working for quite some time on the VU+Duo2 (I have one here myself and I use it frequently for transcoding).

[hypnos]

I mean in webif second icon. In my build when I click on icon. nothing to do.

[Erik Slagter]

See other topic, a workaround for the broken OpenwebInterface interface to OpenPLi is in the making.

[hypnos]

ok thanks and sorry

[Erik Slagter]

I commited a probable fix yesterday, you may want to try it.

 

- update

- check if you have have streamproxy version 2+git98+b802cee-r0.0 and enigma2-plugin-systemplugins-transcodingsetup version experimental-git3963+7982152-r0.0 after the update, otherwise report

- run the transcoding setup plugin once and fill in some values

- for vuplus the values are real configuration items that are changed in the /etc/enigma2/streamproxy.conf file, for non-vuplus they're dummies that are only passed to the openwebif (but the owif uses them to build the appropriate urls, so the effect is actually the same, as long as you use the webif for transcoding)

- the values can be changed from the webif as well (because mostly you're not at home when you want to do transcoding), under "settings" and then "transcoding setup".

[hypnos]

Thank you, I try on weekend clear new installation and write you. Now I have everything in my older img, but not function.

Thanks.

[realmic]

Hi Erik,

 

my test on an Vu+ SOLO2 and DUO2 was successful, the OpenWebIf Transcoding is working now.. thanks!

 

But on a second SOLO2 - same OpenPLi 4 (2015-02-24) version - only without pre-installed streamproxy and transcodingsetup, I received the following error message:

 

tux@solo2:~# opkg install streamproxy
Installing streamproxy (2+git98+b802cee-r0.0) on root.
Downloading http://downloads.pli...0.0_vusolo2.ipk.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for streamproxy:
 *     vuplus-filestreamproxy *     vuplus-livestreamproxy *
 * opkg_install_cmd: Cannot install package streamproxy.

tux@solo2:~# opkg install enigma2-plugin-systemplugins-transcodingsetup
Installing vuplus-transcoding (2.0-1) on root.
Collected errors:
 * opkg_download_pkg: Package vuplus-transcoding is not available from any configured src.
 * opkg_install_pkg: Failed to download vuplus-transcoding. Perhaps you need to run 'opkg update'?
 * opkg_install_cmd: Cannot install package enigma2-plugin-systemplugins-transcodingsetup.

 

 

tux@solo2:~# opkg list | grep streamproxy
streamproxy - 2+git98+b802cee-r0.0 - streamproxy version 2+gitAUTOINC+b802cee2ab-r0  Streamproxy for live and
streamproxy-dev - 2+git98+b802cee-r0.0 - streamproxy version 2+gitAUTOINC+b802cee2ab-r0 - Development files

tux@solo2:~# opkg list | grep enigma2-plugin-systemplugins-transcodingsetup
enigma2-plugin-systemplugins-transcodingsetup - experimental-git3963+7982152-r0.2 - systemplugins-transcodingsetup  systemplugins-transcodingsetup

[Erik Slagter]

The depencies on your receiver are bogus. The best way to cure this is to flash.

[hypnos]

Hi, maybe I am stupid, but for me is not function. Normal streaming is OK. Or you can write me, how I can use transcoding? Software for windows or linux? Thanks and sorry.

There is a screens.

 1.png   308.12KB   9 downloads

 2.jpg   48.75KB   7 downloads

 

in streamproxy.conf:

listen = 8002:transcode

listen = 8003:transcode

size = 576p

bitrate = 100

profile = baseline

level = 3.1

bframes = 0

Edited by hypnos, 27 February 2015 - 19:52.

[Erik Slagter]

Don't be stubborn. You need to flash to cure this.

[realmic]

Ok, I've found a wrong (old?!) setting-config in OPKG status file

 

/var/lib/opkg/status
..
Package: vuplus-transcoding                                               
Version: 2.0-1                
Depends: vuplus-filestreamproxy, vuplus-livestreamproxy
Replaces: enigma2-transtreamproxy-util, enigma2-plugin-systemplugins-transcodingsetup
Conflicts: enigma2-transtreamproxy-util, enigma2-plugin-systemplugins-transcodingsetup
Status: install user not-installed
Architecture: vusolo2
..

 

after deleting this complete buggy entry, and with opkg update .. I was able to install the transcodingsetup software, now.

 

Erik, your package is ok.. I think the issue on my second Vu+ SOLO2, was a manual installation of the very very old vuplus-transcoding software in the past.

[hypnos]

But I do new flash. 

Look.

 

PLi-OE Distro: openpli Firmware: 4.0 Driver date: 3.13.5+20150109-r0.1 Verze jádra: 3.13.5 Enigma: 2015-02-25

[metoo]

maybe something in autobackup?

[Erik Slagter]

Why are you doing "opkg install transcodingsetup"? The error says that this package doesn't exists and that is correct.

Edited by Erik Slagter, 1 March 2015 - 10:04.

[realmic]

@hypnos: Please check if streamproxy is running..

 

#process status check:

tux@duo2:~# ps wl | grep [s]treamproxy
S     0  5397     1  4860   828 0:0   14:23 00:00:00 /usr/bin/streamproxy

 

#netstat check:

tux@duo2:~# netstat -lpnt | grep :800
tcp        0      0 0.0.0.0:8001            0.0.0.0:*               LISTEN      515/enigma2
tcp        0      0 :::8002                 :::*                    LISTEN      5397/streamproxy
tcp        0      0 :::8003                 :::*                    LISTEN      5397/streamproxy
 

#streamproxy HD720p config example:

tux@duo2:~# cat /etc/enigma2/streamproxy.conf
listen = 8002:transcode
listen = 8003:transcode
size = 720p
bitrate = 2000
profile = baseline
level = 3.1
bframes = 0
 

You can also try to start streamproxy in DEBUG/Foreground Mode:

tux@duo2:~# /etc/init.d/streamproxy.sh stop
tux@duo2:~# /usr/bin/streamproxy -f

[Erik Slagter]

After a fresh flash, the streamproxy WILL be installed and it WILL be running, as does the setup plugin, which will be installed automatically.

[hypnos]

Now is OK, I used upgrade.

[julekjulek]

Unfortunately, in my vu+duo2 transcoding does not work.

I do not know what is the reason

 

VLC log message

access_http error: cannot connect to 192.168.1.98:8081
access_mms error: cannot connect to 192.168.1.98:8081
main error: open of `http://192.168.1.98:8081/1:0:1:C22:1E78:71:820000:0:0:0:' failed

Current software tuner

System OE:	PLi-OE
Distro:	openpli
Wersja oprogramowania:	4.0
Driver date:	3.13.5+20150317-r0.0
Wersja jądra:	3.13.5
Wersja GUI:	2015-03-26

Other information

root@vuduo2:~# ps wl | grep [s]treamproxy
S     0 20359     1  4860   804 0:0   13:21 00:00:00 /usr/bin/streamproxy

root@vuduo2:~# netstat -lpnt | grep :800
tcp        0      0 0.0.0.0:8001            0.0.0.0:*               LISTEN      15355/enigma2
tcp        0      0 :::8002                 :::*                    LISTEN      20359/streamproxy
tcp        0      0 :::8003                 :::*                    LISTEN      20359/streamproxy

root@vuduo2:~# cat /etc/enigma2/streamproxy.conf
listen = 8002:transcode
listen = 8003:transcode
size = 720p
bitrate = 2000
profile = baseline
level = 3.1
bframes = 0

[WanWizard]

Why use port 8081, when transcoding is configured to use 8002 or 8003?