20 replies to this topic

[angelo200]

Hallo Leute,

 

ich habe ein kleines Problem mit dem auslagern von meinem Flashspeicher.

Immer wenn ich den Flash ausgelagert habe, kann ich nicht mehr in die Einstellungen der Box zugreifen. Es kommt immer ein Greenscreen und die Box startet neu. Ich versteh nicht warum das so ist.

Ich erstell erst mit Epart eine Partition dann lager ich den Flash aus. Soll ich den Crashlog posten?

Zu meiner Hardware

DM800SE

Image (openpli-4.0-beta-dm800se)

 

Ich danke euch

 

[Frenske]

Willkommen auf dem OpenPLi Supportboard.
Ohne Crashlog ist es ziemlich schwer um dich zu raten ob und wie einiges zu lösen ist.

[angelo200]

 

 

 

{\rtf1\ansi\ansicpg1252\deff0\nouicompat\deflang1031{\fonttbl{\f0\fnil\fcharset0 Courier New;}{\f1\fnil\fcharset0 Calibri;}}
{\colortbl ;\red0\green0\blue255;}
{\*\generator Riched20 6.3.9600}\viewkind4\uc1
\pard\f0\fs22 <?xml version="1.0" encoding="utf-8"?>\par
<openpli>\par
\tab <enigma2>\par
\tab\tab <crashdate>So Feb 22 20:57:56 2015</crashdate>\par
\tab\tab <compiledate>Oct  4 2014</compiledate>\par
\tab\tab <contactemail>forum at {{\field{\*\fldinst{HYPERLINK www.openpli.org</contactemail> }}{\fldrslt{www.openpli.org</contactemail>\ul0\cf0}}}}\f0\fs22\par
\tab\tab <!-- Please email this crashlog to above address -->\par
\tab\tab <skin>PLi-HD/skin.xml</skin>\par
\tab\tab <sourcedate>2014-10-03</sourcedate>\par
\tab\tab <branch>(no branch)</branch>\par
\tab\tab <rev>815b7e1</rev>\par
\tab\tab <version>3.0.0</version>\par
\tab </enigma2>\par
\tab <image>\par
\tab\tab <stbmodel>dm800se</stbmodel>\par
\tab\tab <kernelversion>\par
\tab\tab\tab <![CDATA[\par
Linux dm800se 3.2-dm800se #1 SMP Tue Sep 2 03:24:19 CEST 2014 mips GNU/Linux\par
]]>\par
\tab\tab </kernelversion>\par
\tab\tab <kernelcmdline>root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200 quiet bmem=116M@140M</kernelcmdline>\par
\tab\tab <nimsockets>NIM Socket 0:</nimsockets>\par
\tab\tab <imageversion>\par
\tab\tab\tab <!-- No such file or directory -->\par
\tab\tab </imageversion>\par
\tab\tab <imageissue>\par
\tab\tab\tab <![CDATA[\par
openpli 4 %h\par
\par
]]>\par
\tab\tab </imageissue>\par
\tab </image>\par
\tab <crashlogs>\par
\tab\tab <enigma2crashlog>\par
\tab\tab\tab <![CDATA[\par
 layer\par
+ (20) misc options\par
+ (20) AVSwitch Driver\par
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!\par
+ (21) input device driver\par
Input device "dreambox front panel" is a remotecontrol\par
Input device "dreambox remote control (native)" is a remotecontrol\par
Input device "dreambox advanced remote control (native)" is a remotecontrol\par
Input device "dreambox ir keyboard" is a keyboard\par
Input device "dreambox ir mouse" is a mouse\par
Found 5 input devices.\par
+ (22) Hdmi CEC driver\par
+ (30) eActionMap\par
+ (35) CI Slots\par
scanning for common interfaces..\par
cannot open /proc/stb/tsmux/input0\par
cannot open /proc/stb/tsmux/input1\par
done, found 0 common interface slots\par
+ (35) CA handler\par
+ (40) eServiceCenter\par
settings instance.\par
+ (41) eServiceFactoryDVD\par
+ (41) eServiceFactoryHDMI\par
+ (41) eServiceFactoryM2TS\par
+ (41) eServiceFactoryMP3\par
+ (41) eServiceFactoryFS\par
+ (41) eServiceFactoryDVB\par
+ (41) Encoders\par
+ (41) Stream server\par
reached rl 70\par
---- opening lame channel db\par
reading services (version 4)\par
loaded 207 channels/transponders and 3235 services\par
scanning for frontends..\par
opening frontend 0\par
close frontend 0\par
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3\par
RTC not ready... wait for transponder time\par
[EPGC] Initialized EPGCache (wait for setCacheFile call now)\par
Loading spinners...\par
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait8.png\par
found 7 spinner!\par
\par
setIoPrio best-effort level 3 ok\par
couldn't open /proc/stb/misc/12V_output\par
Scanning hardware info\par
Detected: dm800se\par
[Harddisk] enumerating block devices...\par
new Harddisk sda -> /dev/sda -> /dev/sda\par
main thread is non-idle! display spinner!\par
Reading satellites.xml\par
sec config cleared\par
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes\par
slot: 0 configmode: simple\par
diseqcmode:  diseqc_a_b\par
sec config completed\par
loading bouquet... /etc/enigma2//bouquets.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh01.tv\par
208 entries in Bouquet userbouquet.vh01.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh02.tv\par
0 entries in Bouquet userbouquet.vh02.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh03.tv\par
503 entries in Bouquet userbouquet.vh03.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh04.tv\par
374 entries in Bouquet userbouquet.vh04.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh05.tv\par
95 entries in Bouquet userbouquet.vh05.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh06.tv\par
108 entries in Bouquet userbouquet.vh06.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh07.tv\par
281 entries in Bouquet userbouquet.vh07.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh08.tv\par
228 entries in Bouquet userbouquet.vh08.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh09.tv\par
225 entries in Bouquet userbouquet.vh09.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh10.tv\par
379 entries in Bouquet userbouquet.vh10.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh11.tv\par
182 entries in Bouquet userbouquet.vh11.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh12.tv\par
129 entries in Bouquet userbouquet.vh12.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh13.tv\par
146 entries in Bouquet userbouquet.vh13.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh14.tv\par
113 entries in Bouquet userbouquet.vh14.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh15.tv\par
92 entries in Bouquet userbouquet.vh15.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh16.tv\par
127 entries in Bouquet userbouquet.vh16.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh17.tv\par
1 entries in Bouquet userbouquet.vh17.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh18.tv\par
18 entries in Bouquet userbouquet.vh18.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh19.tv\par
103 entries in Bouquet userbouquet.vh19.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh20.tv\par
25 entries in Bouquet userbouquet.vh20.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh21.tv\par
286 entries in Bouquet userbouquet.vh21.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh22.tv\par
215 entries in Bouquet userbouquet.vh22.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh23.tv\par
159 entries in Bouquet userbouquet.vh23.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh24.tv\par
44 entries in Bouquet userbouquet.vh24.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh25.tv\par
103 entries in Bouquet userbouquet.vh25.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh26.tv\par
14 entries in Bouquet userbouquet.vh26.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh27.tv\par
66 entries in Bouquet userbouquet.vh27.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh28.tv\par
72 entries in Bouquet userbouquet.vh28.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh29.tv\par
198 entries in Bouquet userbouquet.vh29.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh30.tv\par
43 entries in Bouquet userbouquet.vh30.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh31.tv\par
4 entries in Bouquet userbouquet.vh31.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh32.tv\par
112 entries in Bouquet userbouquet.vh32.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh33.tv\par
1 entries in Bouquet userbouquet.vh33.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh34.tv\par
330 entries in Bouquet userbouquet.vh34.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh35.tv\par
143 entries in Bouquet userbouquet.vh35.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh36.tv\par
61 entries in Bouquet userbouquet.vh36.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh37.tv\par
302 entries in Bouquet userbouquet.vh37.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh38.tv\par
196 entries in Bouquet userbouquet.vh38.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh39.tv\par
227 entries in Bouquet userbouquet.vh39.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh40.tv\par
61 entries in Bouquet userbouquet.vh40.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh41.tv\par
75 entries in Bouquet userbouquet.vh41.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh42.tv\par
30 entries in Bouquet userbouquet.vh42.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh43.tv\par
31 entries in Bouquet userbouquet.vh43.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh44.tv\par
28 entries in Bouquet userbouquet.vh44.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh45.tv\par
28 entries in Bouquet userbouquet.vh45.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh46.tv\par
17 entries in Bouquet userbouquet.vh46.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh47.tv\par
7 entries in Bouquet userbouquet.vh47.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh48.tv\par
89 entries in Bouquet userbouquet.vh48.tv\par
loading bouquet... /etc/enigma2//userbouquet.vh208.tv\par
2 entries in Bouquet userbouquet.vh208.tv\par
loading bouquet... /etc/enigma2//userbouquet.favourites.tv\par
0 entries in Bouquet userbouquet.favourites.tv\par
loading bouquet... /etc/enigma2//userbouquet.SKY_HD__tv_.tv\par
124 entries in Bouquet userbouquet.SKY_HD__tv_.tv\par
51 entries in Bouquet bouquets.tv\par
loading bouquet... /etc/enigma2//bouquets.radio\par
loading bouquet... /etc/enigma2//userbouquet.vh01.radio\par
55 entries in Bouquet userbouquet.vh01.radio\par
loading bouquet... /etc/enigma2//userbouquet.vh02.radio\par
43 entries in Bouquet userbouquet.vh02.radio\par
loading bouquet... /etc/enigma2//userbouquet.vh03.radio\par
265 entries in Bouquet userbouquet.vh03.radio\par
loading bouquet... /etc/enigma2//userbouquet.vh04.radio\par
185 entries in Bouquet userbouquet.vh04.radio\par
loading bouquet... /etc/enigma2//userbouquet.favourites.radio\par
0 entries in Bouquet userbouquet.favourites.radio\par
5 entries in Bouquet bouquets.radio\par
Renumbering...\par
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)\par
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)\par
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)\par
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)\par
 - double buffering available!\par
9184kB available for acceleration surfaces.\par
resolution: 1280 x 720 x 32 (stride: 5120)\par
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml\par
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml\par
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)\par
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)\par
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)\par
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)\par
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)\par
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)\par
Unknown device type: dreambox front panel\par
Activating keymap: Default (US)\par
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap\par
Activating language Deutsch\par
--> setting scaler_sharpness to: 0000000D\par
[ePopen] command: ip -o addr show dev eth0\par
[ePopen] command: ip -o addr show dev wlan0\par
setLCDBrightness 25\par
setLCDBrightness 127\par
getModeList for port DVI-PC\par
getModeList for port YPbPr\par
getModeList for port Scart\par
getModeList for port DVI-PC\par
getModeList for port DVI\par
hotplug on dvi\par
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto\par
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto\par
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto\par
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto\par
setMode - port: DVI mode: 1080i rate: multi\par
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto\par
eParted set language to de\par
[AudioSync] fallback to default translation for  Audio Sync Setup\par
[AudioSync] fallback to default translation for  Audio Sync\par
Plugin  Extensions/WebInterface failed to load: No module named plugin\par
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface\par
starting hotplug handler\par
[Softcam] Started\par
restarting enigma dreambox \par
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'\par
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>\par
[SKIN] No skin to read...\par
RemovePopup, id = ZapError\par
setValue 100\par
Setvolume: 100 100 (raw)\par
Setvolume: 0 0 (-1db)\par
Setvolume: 100 100 (raw)\par
Setvolume: 0 0 (-1db)\par
playing 1:0:19:EF75:3F9:1:C00000:0:0:0:\par
getResolvedKey config.usage.remote_fallback failed !! (Typo??)\par
statfs failed!\par
not pauseable.\par
statfs failed!\par
not pauseable.\par
statfs failed!\par
not pauseable.\par
statfs failed!\par
new service started! trying to download cuts!\par
download failed, no cuesheet interface\par
RemovePopup, id = ZapError\par
allocate channel.. 03f9:0001\par
opening frontend 0\par
(0)tune\par
RotorCmd ffffffff, lastRotorCmd ffffffff\par
prepare_sat System 1 Freq 11464000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0\par
tuning to 1714 mhz\par
OURSTATE: tuning\par
allocate Channel: res 0\par
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF75:3F9:1:C00000:0:0:0:\par
allocate demux\par
eHdmiCEC: received message 89 01 \par
[ePopen] command: route -n | grep  eth0\par
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)\par
[ePopen] command: route -n | grep  wlan0\par
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)\par
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)\par
[SEC] set static current limiting\par
set sequence pos 3\par
set sequence pos 4\par
[SEC] setVoltage 2\par
[SEC] sleep 200ms\par
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)\par
0.0.0.0\par
192.168\par
nameservers: [[192, 168, 178, 1]]\par
read configured interface: \{'bnep0': \{'dhcp': True\}, 'usb0': \{'dhcp': False\}, 'lo': \{'dhcp': False\}, 'wlan0': \{'dhcp': True\}, 'atml0': \{'dhcp': True\}, 'eth1': \{'dhcp': True\}, 'eth0': \{'dhcp': True\}\}\par
self.ifaces after loading: \{'wlan0': \{'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:e0:4c:72:11:8a', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]\}, 'eth0': \{'preup': False, 'predown': False, 'ip': [192, 168, 178, 24], 'up': True, 'mac': '00:09:34:2c:0f:65', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]\}\}\par
AT plugin not found\par
ER plugin not found\par
[OpenWebif] no plugins to load\par
[OpenWebif] started on 80\par
[OpenWebif] started on 443\par
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)\par
[SEC] invalidate current switch params\par
[SEC] sendDiseqc: e00000(DiSEqC reset)\par
[SEC] sleep 50ms\par
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)\par
[SEC] sleep 150ms\par
[SEC] sendDiseqc: e01038f6(?)\par
[SEC] sleep 50ms\par
set sequence pos 3\par
set sequence pos 3\par
[SEC] update current switch params\par
[SEC] startTuneTimeout 5000\par
[SEC] setFrontend 1\par
setting frontend 0\par
(0)fe event: status 0, inversion off, m_tuning 1\par
[SEC] sleep 500ms\par
(0)fe event: status 1, inversion off, m_tuning 2\par
eHdmiCEC: received message 87 00 E0 91 \par
eHdmiCEC: received message 87 00 E0 91 \par
eHdmiCEC: received message 87 00 E0 91 \par
eHdmiCEC: received message 87 00 E0 91 \par
(0)fe event: status 0, inversion off, m_tuning 3\par
[SEC] set dynamic current limiting\par
eHdmiCEC: received message \par
eHdmiCEC: received message 89 01 \par
(0)fe event: status 1f, inversion off, m_tuning 4\par
OURSTATE: ok\par
[eDVBLocalTimerHandler] channel 0x1e0cdc0 running\par
[eEPGCache] channel 0x1e0cdc0 running\par
stop release channel timer\par
ok ... now we start!!\par
eventNewProgramInfo 0 0\par
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021\par
allocate demux\par
decoder state: play, vpid=511, apid=515\par
DMX_SET_PES_FILTER(0x1ff) - pcr - ok\par
DEMUX_START - pcr - ok\par
DMX_SET_PES_FILTER(0x203) - audio - ok\par
DEMUX_START - audio - ok\par
AUDIO_SET_BYPASS(0) - ok\par
AUDIO_PAUSE - ok\par
AUDIO_PLAY - ok\par
Video Device: /dev/dvb/adapter0/video0\par
demux device: /dev/dvb/adapter0/demux0\par
VIDEO_SET_STREAMTYPE 1 - ok\par
DMX_SET_PES_FILTER(0x1ff) - video - ok\par
DEMUX_START - video - ok\par
VIDEO_FREEZE - ok\par
VIDEO_PLAY - ok\par
DMX_SET_PES_FILTER(0x21) - ttx - ok\par
DEMUX_START - ttx - ok\par
VIDEO_SLOWMOTION(0) - ok\par
VIDEO_FAST_FORWARD(0) - ok\par
VIDEO_CONTINUE - ok\par
AUDIO_CONTINUE - ok\par
AUDIO_CHANNEL_SELECT(0) - ok\par
disable teletext subtitles page ffffffffffffffff (und)\par
statfs failed!\par
not pauseable.\par
statfs failed!\par
not pauseable.\par
statfs failed!\par
[eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:\par
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:\par
RemovePopup, id = ZapError\par
VIDEO_GET_EVENT - ok\par
VIDEO_GET_EVENT - ok\par
PATready\par
use pmtpid 0061 for service_id ef75\par
eventNewProgramInfo 0 0\par
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021\par
decoder state: play, vpid=511, apid=515\par
[eDVBCIInterfaces] gotPMT\par
action ->  InfobarMenuActions mainMenu\par
loading mainmenu XML...\par
TimerEdit TimerEditList\par
PluginBrowser PluginBrowser\par
[Dish] tuning failed\par
sdt update done!\par
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff\par
[eDVBLocalTimerHandler] update RTC\par
[eDVBLocalTimerHandler] time update to 20:57:56\par
[eDVBLocalTimerHandler] m_time_difference is 1424634999\par
[eDVBLocalTimerHandler] set Linux Time\par
[EPGC] time updated.. start EPG Mainloop\par
[EPGC] /hdd/epg.dat not found, try /epg.dat\par
AITready\par
action ->  OkCancelActions ok\par
okbuttonClick\par
ParentalControlSetup ParentalControlSetup\par
SoftwareUpdate UpdatePlugin\par
Screen <class 'Screens.Menu.Menu'>((<Element 'menu' at 0x1145998>,), \{\}): <type 'exceptions.KeyError'>\par
Traceback (most recent call last):\par
  File "/usr/lib/enigma2/python/mytest.py", line 226, in create\par
    return screen(self, *arguments, **kwargs)\par
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 183, in __init__\par
  File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 133, in getPluginsForMenu\par
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/SoftwareManager/plugin.py", line 1919, in startSetup\par
    if menuid == "setup" and config.plugins.softwaremanager.onSetupMenu.value:\par
  File "/usr/lib/enigma2/python/Components/config.py", line 1577, in __getattr__\par
KeyError: 'onSetupMenu'\par
Traceback (most recent call last):\par
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action\par
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action\par
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 50, in okbuttonClick\par
  File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__\par
  File "/usr/lib/enigma2/python/mytest.py", line 294, in openWithCallback\par
    dlg = self.open(screen, *arguments, **kwargs)\par
  File "/usr/lib/enigma2/python/mytest.py", line 305, in open\par
    dlg.isTmp = True\par
AttributeError: 'NoneType' object has no attribute 'isTmp'\par
(PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x1dc3b20>>,('OkCancelActions', 'ok')) failed)\par
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)\par
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)\par
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)\par
]]>\par
\tab\tab </enigma2crashlog>\par
\tab </crashlogs>\par
</openpli>\par
\par

\pard\sa200\sl276\slmult1\f1\lang7\par
}
 

 

 

[Frenske]

Das Image ist irgendwo von Oktober 2014. ich würde dir raten mal neu zu flashen. Damit werde viele Sachen gelöst.

[angelo200]

und woher bekomme ich das neue image

[angelo200]

Es ist aber eine DM800Se clone box. Es hat aber immer funktioniert mit dem Image.

[Frenske]

In dem Fall können wir dich hier nicht behilflich sein weil wir kein Clones unterstützen.

[Frenske]

Suche mal mit Google nach Sim +Dm800se. Oder bei Dreamoem gibt es Images für Clones.

[xionix]

Nachdem hier aber mal zumindest scheinbar wer liest der Ahnung hat hätte ich eine kleine Frage, wie lager ich denn den Flash dann aus?? Bin seit Tagen auf er suche wie das nun funktioniert bei PLI4 seit einigen wochen scheint flodder und flashexpander usw ja nicht mehr zu funktionieren (bei neuinstallation! bei denen bei den ichs schon installiert habe, funktionierts weiter ohne probleme). ich hänge den stick ein doch wie oder mit was erweitere ich den flash?

 

glg

[xionix]

Vielleicht kann man den Thread ja zusammenführen mit dem folgenden? http://forums.openpl...-flashexpander/

Geht ja ums gleiche Thema und ich bin mir sicher das ihr hals core und senior member das wissen habt so ein plugin zu bauen. geht ja nicht nur um die Dreambox sondern um alle Enigma2 boxen und solch ein tool hätte für alle vorteile.

[angelo200]

Hallo,

 

die Open Pli 4.0 ist das neuste Image was ich für die Box gefudnen habe.

[angelo200]

Hallo xionix,

 

also ich habe es so gemacht

 

1. eParted installiert über FTP

2. Flashexpander installiert aber manuell

3. USB stick an die Box gehängt (menü->einstellungen->festplatte->initialisieren)

 

dann eParted starten

1. löschen

2. hinzufügen( bei einem 4GB Stick habe ich es so gemacht) 2 und 2 GB ext3

3.Ausführen.

Flashexpander ausführen und auslagern auf eine von eben erstellete Partition.

[xionix]

OK und von wo hast du die flashexpander ipk? Bei funkt nämlich keine :-/

[angelo200]

Hallo,

 

lad dir mal den..

http://ul.to/7d3nfmum

 

den musst du manuell installieren /usr\lib\enigma2\python\Plugins\Extensions

einfach den Ordner Fleshexpander da rein und GUI neu starten.

 

Hast du eigentlich eine Originale Box?

 

Ich will wissen ob es für meine DM schon eine neue Software gibt. Ich finde nur die 4.0

Edited by angelo200, 24 February 2015 - 08:51.

[erkman]

4.0 ist die aktuelle grund version, da gibt es nix neueres. nur fast jede nacht "kleinere" updates

[xionix]

haha um ehrlich zu sein hab ich das ganz neu runter geladen und neu geflashed

[xionix]

angelo2000 danke für den link. Deine version vom flashexpander funktioniert warum auch immer.

[xionix]

Ok ich hab mal die neueste Version vom Flashexpander so angepasst das die unter Openpli läuft. Einfach das Verzeichnis entpacken und nach usr\lib\enigma2\python\Plugins\Extensions kopieren

 

Vielleicht kann ja auch noch jemand eine ipk daraus erstellen, hab grade kein linux bei der hand

 

http://ul.to/xeh00vkb

[angelo200]

Hallo Xionix,

 

 

ging es dann bei dir??

Ich versteh nicht warum es bei mir so macht. Warum komm ich nicht mehr in das Menü?

Ich werde von dem Crashlog nicht schlau!!!

[xionix]

Ja es ging. Deine Version hat funktioniert und ich hab das neueste einfach adaptiert und das hat eigentlich auch funktioniert danach :-)