<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>zo apr 5 11:09:35 2015</crashdate>
<compiledate>Apr 5 2015</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PLi-HD/skin.xml</skin>
<sourcedate>2015-04-04</sourcedate>
<branch>(no branch)</branch>
<rev>07da09c</rev>
<version>4</version>
</enigma2>
<image>
<stbmodel>et9000</stbmodel>
<kernelversion>
<![CDATA[
Linux et9x00 3.8.7 #1 SMP Mon Feb 16 04:01:15 CET 2015 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline> bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=null consoleblank=0</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
openpli 4 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
ion for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
setMode - port: DVI mode: 1080i rate: multi
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
< 45.218558> eHdmiCEC: send message 84 10 00 01
[EPGImport] autostart (0) occured at 45.24582
starting hotplug handler
[EPGImport] autostart (0) occured at 45.397883
[EPGImport] WakeUpTime now set to 10805 (now=45)
[SKIN] No skin to read...
< 45.556405> [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
RemovePopup, id = ZapError
setValue 100
< 47.426339> Setvolume: raw: 100 100, -1db: 0 0
< 47.431108> Setvolume: raw: 100 100, -1db: 0 0
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 47.782729> [eDVBServicePlay::timeshift]
not pauseable.
< 47.788627> [eDVBServicePlay::timeshift]
not pauseable.
< 47.795120> [eDVBServicePlay::timeshift]
not pauseable.
< 47.801558> [eDVBServicePlay::timeshift]
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
< 47.810352> [eDVBResourceManager] allocate channel.. 0c99:0003
< 47.813932> opening frontend 0
< 47.838124> (0)tune
< 47.843172> RotorCmd ffffffff, lastRotorCmd ffffffff
< 47.843565> prepare_sat System 1 Freq 12187000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 0
< 47.843933> tuning to 1587 mhz
< 47.844234> [eDVBChannel] OURSTATE: tuning
< 47.844538> allocate Channel: res 0
< 47.850965> [eDVBCIInterfaces] addPMTHandler 1:0:19:5225:C99:3:EB0000:0:0:0:
< 47.856023> [eDVBChannel] getDemux cap=00
< 47.856294> [eDVBResourceManager] allocate demux cap=00
< 47.856547> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1
< 47.864543> eHdmiCEC: received message
[ePopen] command: route -n | grep eth0
< 48.050146> poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
< 48.050443> poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
< 48.050676> poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
< 48.079953> [SEC] set static current limiting
< 48.081431> eHdmiCEC: received message
< 48.086169> set sequence pos 3
< 48.087474> eHdmiCEC: received message 46
< 48.089371> eHdmiCEC: send message 47 65 74 39 78 30 30
< 48.090773> eHdmiCEC: received message 8C
< 48.106080> eHdmiCEC: send message 87 00 00 00
< 48.106841> set sequence pos 4
< 48.115464> [SEC] setVoltage 2
< 48.122616> [SEC] sleep 200ms
0.0.0.0
192.168
nameservers: [[192, 168, 1, 254], [195, 241, 77, 55], [195, 241, 77, 58]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 254], 'address': [192, 168, 1, 59]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 59], 'up': True, 'mac': '00:16:b4:03:b2:1a', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 254]}}
AT plugin not found
SerienRecorder plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
< 48.288701> poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
< 48.323300> [SEC] invalidate current switch params
< 48.342705> [SEC] sendDiseqc: e00000(DiSEqC reset)
< 48.350395> [SEC] sleep 50ms
< 48.415774> [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
< 48.416361> [SEC] sleep 150ms
< 48.581349> [SEC] sendDiseqc: e01038fb(?)
< 48.581940> [SEC] sleep 50ms
< 48.632589> set sequence pos 3
< 48.633041> [SEC] setTone 1
< 48.651903> [SEC] sleep 10ms
< 48.662266> [SEC] update current switch params
< 48.662610> [SEC] startTuneTimeout 5000
< 48.662876> [SEC] setFrontend 1
< 48.663105> setting frontend 0
< 48.663580> (0)fe event: status 0, inversion off, m_tuning 1
< 48.663839> [SEC] sleep 500ms
< 48.817269> (0)fe event: status 1f, inversion off, m_tuning 2
< 48.817689> [eDVBChannel] OURSTATE: ok
< 48.819376> [eDVBLocalTimerHandler] channel 0x1ba28b0 running
< 48.821074> [eDVBChannel] getDemux cap=00
< 48.826855> [eEPGCache] channel 0x1ba28b0 running
< 48.827179> [eDVBChannel] getDemux cap=00
< 48.828269> [eDVBResourceManager] stop release channel timer
< 48.828501> [eDVBChannel] getDemux cap=00
< 48.828686> ok ... now we start!!
< 48.828868> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 48.830495> [eDVBServicePlay] have 1 video stream(s) (0207), and 1 audio stream(s) (0063), and the pcr pid is 0207, and the text pid is 0028
< 48.831218> [eDVBChannel] getDemux cap=01
< 48.831422> [eDVBResourceManager] allocate demux cap=01
< 48.831625> [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
< 48.864919> decoder state: play, vpid=519, apid=99
< 48.865332> DMX_SET_PES_FILTER(0x207) - pcr0 - ok
< 48.865564> DEMUX_START - pcr - ok
< 48.866257> [eDVBAudio] DMX_SET_PES_FILTER(0x63) - audio0 - ok
< 48.866504> [eDVBAudio] DEMUX_START - audio0 - ok
< 48.867118> [eDVBAudio] AUDIO_SET_BYPASS(0) - audio0ok
< 48.870795> [eDVBAUDIO] AUDIO_PAUSE - audio0 ok
< 48.871062> [eDVBAudio] AUDIO_PLAY - ok
< 48.892866> Video Device: /dev/dvb/adapter0/video0
< 48.893230> demux device: /dev/dvb/adapter0/demux0
< 48.893527> VIDEO_SET_STREAMTYPE 1 - ok
< 48.893751> DMX_SET_PES_FILTER(0x207) - video0 - ok
< 48.893973> DEMUX_START - video - ok
< 48.894476> VIDEO_FREEZE - ok
< 48.894733> VIDEO_PLAY - ok
< 48.901373> DMX_SET_PES_FILTER(0x28) - ttx0 - ok
< 48.901612> DEMUX_START - ttx - ok
< 48.925101> VIDEO_SLOWMOTION(0) - ok
< 48.925374> VIDEO_FAST_FORWARD(0) - ok
< 48.925593> VIDEO_CONTINUE - ok
< 48.925807> [eDVBAUDIO] AUDIO_CONTINUE - audio0 ok
< 48.929715> AUDIO_CHANNEL_SELECT(0) - ok
< 48.940166> TTX: disable teletext subtitles page ffffffffffffffff (und)
< 49.002823> [eDVBCAService] new service 1:0:19:5225:C99:3:EB0000:0:0:0:
< 49.003330> [eDVBCAService] add demux 0 to slot 0 service 1:0:19:5225:C99:3:EB0000:0:0:0:
RemovePopup, id = ZapError
< 49.055874> PATready
< 49.056484> use pmtpid 0aa9 for service_id 5225
< 49.167649> [SEC] set dynamic current limiting
< 49.172926> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 49.182717> [eDVBServicePlay] have 1 video stream(s) (0207), and 1 audio stream(s) (0063), and the pcr pid is 0207, and the text pid is 0028
< 49.184276> decoder state: play, vpid=519, apid=99
< 49.253340> [eDVBCIInterfaces] gotPMT
[Dish] tuning failed
< 49.556341> AITready
< 49.884706> sdt update done!
< 50.502108> VIDEO_GET_EVENT - got FRAME_RATE_CHANGED 25000 fps
< 50.502777> VIDEO_GET_EVENT - got SIZE_CHANGED 1920x1080 aspect 3
< 50.536736> VIDEO_GET_EVENT - got PROGRESSIVE_CHANGED 0
< 55.540601> [eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
< 55.541595> [eDVBLocalTimerHandler] update RTC
< 55.542112> [eDVBLocalTimerHandler] time update to 11:07:12
< 55.542339> [eDVBLocalTimerHandler] m_time_difference is 1428224777
< 55.542541> [eDVBLocalTimerHandler] set Linux Time
< 55.543046> [EPGC] time updated.. start EPG Mainloop
< 55.547801> [eDVBChannel] getDemux cap=00
< 82.446456> [EPGC] 574331 events read from /hdd/epg.dat
< 82.520988> [EPGC] next update in 2 sec
< 84.531246> [EPGC] start caching events(1428224861)
< 91.561080> [EPGC] abort non avail virgin nownext reading
< 91.563866> [EPGC] abort non avail virgin schedule reading
< 91.565460> [EPGC] abort non avail netmed schedule reading
< 91.568449> [EPGC] abort non avail netmed schedule other reading
< 91.570164> [EPGC] abort non avail FreeSat schedule_other reading
< 91.573499> [EPGC] abort non avail viasat reading
< 91.575293> [EPGC] abort non avail mhw reading
< 99.546740> [EPGC] nownext finished(1428224876)
[ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
< 155.335654> poll: unhandled POLLERR/HUP/NVAL for fd 62(16)
< 181.599851> [EPGC] schedule other finished(1428224958)
< 181.911417> [EPGC] schedule finished(1428224958)
< 181.914570> [EPGC] stop caching events(1428224958)
< 181.914892> [EPGC] next update in 60 min
action -> InfobarChannelSelection keyRight
< 188.649622> [eDVBServicePlay::timeshift]
< 188.651959> [eDVBCAService] free slot 0 demux 0 for service 1:0:19:5225:C99:3:EB0000:0:0:0:
< 188.652761> [eDVBCAService] free service 1:0:19:5225:C99:3:EB0000:0:0:0:
< 188.704771> decoder state: play, vpid=-1, apid=-1
< 188.705122> DEMUX_STOP - pcr - ok
< 188.705577> DEMUX_STOP - video - ok
< 188.706351> VIDEO_STOP - ok
< 188.708424> [eDVBAUDIO] AUDIO_STOP - audio0
< 188.708668> [eDVBAUDIO] AUDIO_STOP - audio0ok
< 188.711369> [eDVBAUDIO] DEMUX_STOP - audio0 - ok
< 188.712298> [eDVBAUDIO] AUDIO_CONTINUE - audio0 ok
< 188.713140> DEMUX_STOP - ttx - ok
< 188.744444> [eDVBResourceManager] start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 188.792162> [eDVBServicePlay::timeshift]
< 188.835438> [eDVBServicePlay::timeshift]
not pauseable.
< 188.838836> [eDVBServicePlay::timeshift]
not pauseable.
< 188.843686> [eDVBServicePlay::timeshift]
not pauseable.
< 188.848272> [eDVBServicePlay::timeshift]
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
< 188.853296> [eDVBLocalTimerHandler] remove channel 0x1ba28b0
< 188.853606> [eEPGCache] remove channel 0x1ba28b0
< 188.865601> [eDVBResourceManager] allocate channel.. 0c82:0003
< 188.867863> (0)tune
< 188.868206> RotorCmd ffffffff, lastRotorCmd ffffffff
< 188.868488> prepare_sat System 1 Freq 11739000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 1
< 188.868836> tuning to 1139 mhz
< 188.869054> [eDVBChannel] OURSTATE: tuning
< 188.869256> allocate Channel: res 0
< 188.869657> [eDVBCIInterfaces] addPMTHandler 1:0:19:17C0:C82:3:EB0000:0:0:0:
< 188.869932> [eDVBChannel] getDemux cap=00
< 188.870141> [eDVBResourceManager] allocate demux cap=00
< 188.870338> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0
< 188.883398> [SEC] set static current limiting
< 188.884550> [SEC] setTone 0
< 188.899640> [SEC] sleep 25ms
< 188.925067> [SEC] setVoltage 1
< 188.929267> [SEC] sleep 20ms
< 188.949517> set sequence pos 3
< 188.949858> [SEC] invalidate current switch params
< 188.963079> [SEC] sendDiseqc: e01038f9(?)
< 188.963638> [SEC] sleep 50ms
< 189.013899> set sequence pos 3
< 189.014353> [SEC] setTone 1
< 189.031763> [SEC] sleep 10ms
< 189.042058> [SEC] update current switch params
< 189.042360> [SEC] startTuneTimeout 5000
< 189.042615> [SEC] setFrontend 1
< 189.042791> setting frontend 0
< 189.240761> (0)fe event: status 0, inversion off, m_tuning 1
< 189.241131> [SEC] sleep 500ms
< 189.306721> (0)fe event: status 1f, inversion off, m_tuning 2
< 189.307039> [eDVBChannel] OURSTATE: ok
< 189.307225> [eDVBLocalTimerHandler] channel 0x1bcfc98 running
< 189.307471> [eDVBChannel] getDemux cap=00
< 189.309059> [eEPGCache] channel 0x1bcfc98 running
< 189.309327> [eDVBChannel] getDemux cap=00
< 189.310388> [EPGC] next update in 2 sec
< 189.310631> [eDVBResourceManager] stop release channel timer
< 189.310834> [eDVBChannel] getDemux cap=00
< 189.311058> ok ... now we start!!
< 189.311237> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 189.311562> [eDVBServicePlay] have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b
< 189.312203> [eDVBChannel] getDemux cap=01
< 189.312387> [eDVBResourceManager] allocate demux cap=01
< 189.312631> [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
< 189.323887> decoder state: play, vpid=525, apid=105
< 189.324276> DMX_SET_PES_FILTER(0x20d) - pcr0 - ok
< 189.324502> DEMUX_START - pcr - ok
< 189.325140> [eDVBAudio] DMX_SET_PES_FILTER(0x69) - audio0 - ok
< 189.325372> [eDVBAudio] DEMUX_START - audio0 - ok
< 189.325844> [eDVBAudio] AUDIO_SET_BYPASS(0) - audio0ok
< 189.329190> [eDVBAUDIO] AUDIO_PAUSE - audio0 ok
< 189.329394> [eDVBAudio] AUDIO_PLAY - ok
< 189.338485> Video Device: /dev/dvb/adapter0/video0
< 189.338741> demux device: /dev/dvb/adapter0/demux0
< 189.338977> VIDEO_SET_STREAMTYPE 1 - ok
< 189.339240> DMX_SET_PES_FILTER(0x20d) - video0 - ok
< 189.339455> DEMUX_START - video - ok
< 189.339894> VIDEO_FREEZE - ok
< 189.340148> VIDEO_PLAY - ok
< 189.346481> DMX_SET_PES_FILTER(0x2b) - ttx0 - ok
< 189.346703> DEMUX_START - ttx - ok
< 189.356252> VIDEO_SLOWMOTION(0) - ok
< 189.356963> VIDEO_FAST_FORWARD(0) - ok
< 189.357241> VIDEO_CONTINUE - ok
< 189.357452> [eDVBAUDIO] AUDIO_CONTINUE - audio0 ok
< 189.357860> TTX: disable teletext subtitles page ffffffffffffffff (und)
< 189.382308> start dvb subtitles on pid 0x0034 with composition_page_id 2 and ancillary_page_id 2
< 189.402657> [eDVBCAService] new service 1:0:19:17C0:C82:3:EB0000:0:0:0:
< 189.403222> [eDVBCAService] add demux 0 to slot 0 service 1:0:19:17C0:C82:3:EB0000:0:0:0:
RemovePopup, id = ZapError
< 189.526369> PATready
< 189.526659> use pmtpid 09b0 for service_id 17c0
< 189.632301> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 189.639955> [eDVBServicePlay] have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b
< 189.641418> decoder state: play, vpid=525, apid=105
< 189.699794> [eDVBCIInterfaces] gotPMT
< 189.743940> [SEC] set dynamic current limiting
[Dish] tuning failed
< 190.578424> AITready
< 190.672543> sdt update done!
< 190.717384> VIDEO_GET_EVENT - got FRAME_RATE_CHANGED 25000 fps
< 190.718270> VIDEO_GET_EVENT - got SIZE_CHANGED 1920x1080 aspect 3
< 190.742733> VIDEO_GET_EVENT - got PROGRESSIVE_CHANGED 0
< 191.319078> [EPGC] start caching events(1428224968)
< 192.331554> [eDVBLocalTimerHandler] diff is 0
< 192.331857> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
< 192.332119> [eDVBLocalTimerHandler] not changed
< 192.334397> [eDVBChannel] getDemux cap=00
< 193.568083> [eDVBServicePlay::timeshift]
action -> InfobarChannelSelection historyBack
< 193.587878> [eDVBServicePlay::timeshift]
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 601, in historyBack
File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1869, in checkTimeshiftRunning
File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 605, in historyBackCheckTimeshiftCallback
File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 2096, in historyBack
File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 2115, in setHistoryPath
File "Navigation.py", line 60, in Navigation.Navigation.playService (Navigation.c:2040)
TypeError: playService() got an unexpected keyword argument 'adjust'
< 193.617409> (PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x1ae0530>>,('InfobarChannelSelection', 'historyBack')) failed)
< 196.854336> [gRC] main thread is non-idle! display spinner!
< 198.349986> [EPGC] abort non avail schedule other reading
< 198.352768> [EPGC] abort non avail virgin nownext reading
< 198.355713> [EPGC] abort non avail virgin schedule reading
< 198.357798> [EPGC] abort non avail netmed schedule reading
< 198.360873> [EPGC] abort non avail netmed schedule other reading
< 198.362595> [EPGC] abort non avail FreeSat schedule_other reading
< 198.365644> [EPGC] abort non avail viasat reading
< 198.367408> [EPGC] abort non avail mhw reading
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Als ik de < AB > deze tekens gebruik crash mijn ET9200.
hoopte dat het zou opgelost zijn maar helaas...
Sinds 2 dagen
Zie bijlage:
Edited by ET9000, 5 April 2015 - 11:53.
