Jump to content


Photo

softcam interference with CI: decoding problems on Vu+ Solo2

cccam viaccess decode buss error

  • Please log in to reply
3 replies to this topic

#1 b_yoshka

  • Member
  • 2 posts

0
Neutral

Posted 25 April 2015 - 21:51

Hello,

I've just bought Vu+ Solo2 and have troubles to make decoding with OFFICIAL cards work. I have a conax card for Canaldigital, viaccess cards for CanalSatellite and HTB+. Since the receiver have 2 card slots and 1 CI slot, I am using HTB+ card with a Viaccess CI and the other two cards with softcam CCcard (I tried the others too: oscam, mgcamd, but they have even more problems). I experience seemingly strange interference between softcam and CI: if I start watching, say, a CanalSatellite channel (which card is in the card slot) it is working fine until I switch to an HTB+ cannel (which should be decoded by the CI). When I switch back, there is a CI message "You do not have rights to access the program" (CI should not be involved at all!) and the CanalSatellite channel is not decoded. I have to restart CCcamd to watch it again. The cards are official, the rights are up to date and and they've been all working fine on Droid receiver. All the soft is the latest updated nightly build. Please, help me with the issue!

 

 

Here is an outcome from

/usr/bin/CCcam -d     command:

 

root@vusolo2:/# /usr/bin/CCcam -d

22:28:41.690 CCcam: ======================================================================
22:28:41.691 CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
22:28:41.691 CCcam: ======================================================================
22:28:41.691 CCcam: online using nodeId f1d475475d73e46d
22:28:41.694 CCcam: dvb api3 detected
22:28:41.694 CCcam: BCM detected
22:28:41.694 CCcam: create 8 cam device(s)
22:28:41.808 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
22:28:41.809 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
22:28:41.809 CCcam: static cw not found or bad
22:28:41.809 CCcam: parsed 0 entries from /var/etc/CCcam.prio
22:28:41.810 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
22:28:41.810 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
22:28:41.810 CCcam: server started on port 12000
22:28:41.812 CCcam: found nagra caid: 0x1812 ecmpid: 0x29f id: 0x0
22:28:41.812 CCcam: found nagra caid: 0x1811 ecmpid: 0x2a0 id: 0x0
22:28:41.813 CCcam: found nagra caid: 0x1811 ecmpid: 0x2a1 id: 0x0
22:28:41.813 CCcam: found nagra caid: 0x1811 ecmpid: 0x2a2 id: 0x0
22:28:41.813 CCcam: found nagra caid: 0x1863 ecmpid: 0x2a9 id: 0x0
22:28:41.813 CCcam: found nagra caid: 0x1863 ecmpid: 0x2aa id: 0x0
22:28:41.813 CCcam: found viaccess caid: 0x500 ecmpid: 0x2ae id: 0x30b00
22:28:41.813 CCcam: found viaccess caid: 0x500 ecmpid: 0x2af id: 0x32940
22:28:41.813 CCcam: found viaccess caid: 0x500 ecmpid: 0x2b0 id: 0x32830
22:28:41.813 CCcam: found viaccess caid: 0x500 ecmpid: 0x2b1 id: 0x43300
22:28:41.813 CCcam: found viaccess caid: 0x500 ecmpid: 0x2b2 id: 0x43330
22:28:41.813 CCcam: found viaccess caid: 0x500 ecmpid: 0x2b3 id: 0x30b00
22:28:41.813 CCcam: found seca caid: 0x100 ecmpid: 0x2a2 id: 0x3317
22:28:41.814 CCcam: found seca caid: 0x100 ecmpid: 0x2a1 id: 0x3315
22:28:41.814 CCcam: found seca caid: 0x100 ecmpid: 0x2a0 id: 0x3311
22:28:41.814 CCcam: found seca caid: 0x100 ecmpid: 0x29f id: 0xa821
22:28:41.814 CCcam: cam[0] set PMT for sid=2216
22:28:41.815 CCcam: start EMM
22:28:41.859 CCcam: EMM demux 1 set
22:28:41.860 CCcam: EMM: not interested in 0100:000000
22:28:41.860 CCcam: EMM: not interested in 0100:003341
22:28:41.860 CCcam: EMM: not interested in 0100:003317
22:28:41.860 CCcam: EMM: not interested in 0100:003311
22:28:41.860 CCcam: EMM: not interested in 0100:003315
22:28:41.860 CCcam: EMM: not interested in 1811:000000
22:28:41.861 CCcam: EMM: not interested in 1811:000000
22:28:41.861 CCcam: EMM: not interested in 1811:000000
22:28:41.861 CCcam: EMM: not interested in 1811:000000
22:28:41.861 CCcam: EMM: not interested in 1811:000000
22:28:41.861 CCcam: EMM: not interested in 1863:000000
22:28:41.861 CCcam: EMM: not interested in 0500:032830
22:28:41.861 CCcam: EMM: not interested in 0500:032920
22:28:41.862 CCcam: EMM: not interested in 0500:032940
22:28:41.862 CCcam: EMM: not interested in 0500:023600
22:28:41.862 CCcam: EMM: not interested in 0500:030B00
22:28:41.862 CCcam: EMM: not interested in 0500:032840
22:28:41.862 CCcam: EMM: not interested in 0500:043330
22:28:41.862 CCcam: EMM: not interested in 0500:043300
22:28:41.862 CCcam: EMM: not interested in 0500:042630
22:28:42.017 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 7) no key
22:28:42.017 CCcam: cam[0] ecm odd nok caid:0x1812 id:0x0 pid:0x29f Unknown
22:28:42.149 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 7) no key
22:28:42.149 CCcam: cam[0] ecm odd nok caid:0x1811 id:0x0 pid:0x2a0 Unknown
22:28:42.248 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 7) no key
22:28:42.249 CCcam: cam[0] ecm odd nok caid:0x1811 id:0x0 pid:0x2a1 Unknown
22:28:42.300 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 7) no key
22:28:42.300 CCcam: cam[0] ecm odd nok caid:0x1811 id:0x0 pid:0x2a2 Unknown
22:28:42.470 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
22:28:42.471 CCcam: cam[0] ecm odd nok caid:0x1863 id:0x0 pid:0x2a9 Unknown
22:28:42.647 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
22:28:42.647 CCcam: cam[0] ecm odd nok caid:0x1863 id:0x0 pid:0x2aa Unknown
22:28:42.692 CCcam: viaccess emu can't decode ecm (key:8 ident:30b00)
22:28:42.692 CCcam: cam[0] ecm odd nok caid:0x500 id:0x30b00 pid:0x2ae Unknown
Bus error
 

 



Re: softcam interference with CI: decoding problems on Vu+ Solo2 #2 Pr2

  • PLi® Contributor
  • 6,199 posts

+261
Excellent

Posted 25 April 2015 - 22:51

Hi,

You need to install this plugin:

enigma2-plugin-systemplugins-commoninterfaceassignment

In order to avoid conflict between softcam and CI slot.

opkg update
opkg install enigma2-plugin-systemplugins-commoninterfaceassignment
Then restart your box, and afterwards go into the cardreader/softcam OpenPLi setup screen and confiure common interface assignment to tell him which ciad:provid is really used in your CI slot.

Pr2

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: softcam interference with CI: decoding problems on Vu+ Solo2 #3 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 26 April 2015 - 13:28

You could also add a USB Phoenix or SmarGo smartcard reader on your box and run 3rd card from there. CI is to be used only when card cannot work with CAM emulators, since most CI modules have limitations on how many channels you can decode (usually only one).



Re: softcam interference with CI: decoding problems on Vu+ Solo2 #4 b_yoshka

  • Member
  • 2 posts

0
Neutral

Posted 27 April 2015 - 11:42

Thank you very much! It's working now. It still takes a bit long (about 5 secs) to switch to a channel decoded by CI and sometimes going back I have to restart CCcam to make the other channels decoded, but it's already an improvement :) 





Also tagged with one or more of these keywords: cccam, viaccess, decode, buss error

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users