7 replies to this topic

[berem]

I recently installed OpenPLi on vu + solo se,  that  had black hole image, but at the start is still marked Black hole, how to remove it?

[janejak]

u have to reflash ur box to get orinale Splash pics on boot.Take the zipfile i have uploaded and extract it sow u get a file named splash_cfe_auto.bin and put on ur usb in folder vuplus\solose\ sow u have 5 files, and reflash ur box

Attached Files

•  splash_cfe_auto.zip   2.92KB   13 downloads

[berem]

I used the bin for Xtrend 7500, but does not replace the written XTA

 

[betacentauri]

This is for a VU box. Be lucky that your box survived it!

And why did you write in post 1 that you have a VU box?

Edited by betacentauri, 15 May 2015 - 17:54.

[berem]

I had the vu + and I thought the bin was also good for Xtrend.
someone could give me the bin for Xtrend 7500?

[janejak]

How to flash bootloader and Xtrend Splash Image:

1. Download the zip file from the link i have uploaded

2. Unzip the file 

3. Copy + paste the et7x00 folder on to root of USB Stick.

4. Insert USB Stick to your et7000 / et7500 and turn on power

When the Power Touch LED button blinks, immediately press the Power Touch LED button

5. Flashing will start automatically

Attached Files

•  cfe-et7x00-20140829.zip   379.79KB   11 downloads

[berem]

the spash.bin there is in the zip, I can use also on Xtrend 4000?

[betacentauri]

The splash.bin yes. But not the cfe.bin! Try without cfe.bin.