107 replies to this topic

[ofrex]

no pli 4.0 on vu+ zero

[JaapS]

download:

wget http://archive.vuplu...20150303.tar.gz

for the solo, install the driver and firmware as described and try to load the module manually after the depmod:

modprobe vuplus_tuner_turbo_driver

​run dmesg and post your output from the driver, it will show what extra modules are needed...

Edited by JaapS, 3 November 2015 - 18:59.

[ofrex]

I have this message:

But sorry I m not an expert but what does it mean:

 

vuplus_tuner_turbo_driver:version 3.9.6 SMP mod_unload MIPS32_R1 32BIT

should be 3.13.5 SMP mod_unload BMIPS 32BIT

 

THANKS

[JaapS]

For the zero and all new machines you can use the drivers Dimitrij posted.

[ofrex]

Hello,

it works with vu+ ZERO and SOLO2!!!

 I used the Dimitrij drivers...

I put this additional module via telnet: opkg install kernel-module-dvb-usb-v2

and the second module in manual mode via the decoder: kernel-module-cypress-firmware_4.0.1-1_sh1.ipk

After:

modprobe vuplus_tuner_turbo_driver

dmesg

And reboot...

Many thanks for your help

Ofrex

[Taapat]

vu-plus update their meta-vuplus bsp and add vuplus-tuner-turbo: https://github.com/O...ce1418717a31602
Therefore for turbo tuner support openpli also need updated meta-vuplus to d72eb4f289d8b2b473dffdb21ce1418717a31602

[Taapat]

Sorry, I confused links to commits.
Here are the right: https://github.com/v...67505ffc10ae815

And of course meta-vuplus need updated to d748217fab5c89dd6894a1b1c67505ffc10ae815

Edited by Taapat, 4 November 2015 - 15:57.

[Erik Slagter]

This commit indeeds seems to fix it (can't check it though).

 

Applied.

[Dimitrij]

done

[satjunk]

Hi all

 

Want also buy the VU+ C tuner..

Have latest Pli on my Solo2 and is the tuner working now out of the box ?

Or do i still need drivers from  Dimitrij post ?

[satjunk]

Hi all

 

Want also buy the VU+ C tuner..

Have latest Pli on my Solo2 and is the tuner working now out of the box ?

Or do i still need drivers from  Dimitrij post ?

All working now..

[matoc]

I use last openli on my vu+solo2,use files from @Dimitrij post and reboot vu+solo2 turbo tuner not see.Please help me.

[matoc]

Problem resloved  http://forums.openpl...en/#entry517418

[Herr der Klinge]

Hello @all,

 

a few weeks ago i bought the "VU* USB Turbo Tuner". Plug&Play didn't work. I don't have a VU+ receiver but a Xtrend 9x00.

 

What do you think: Is there any chance to get the tuner working like written in this thread? Is it hopeless due to incompatibility?

 

 

My current problem with your workaround is this message:

modprobe: ERROR: could not insert 'vuplus_tuner_turbo_driver': Exec format error 

Maybe your first answer would be: There never was a chance, but -> No risk, no fun

Edited by Herr der Klinge, 27 February 2016 - 21:04.

[athoik]

If there are drivers available from linux you might be able to use it.

Don't expect vu drivers to work on another box than vu.

[malakudi]

Interesting. From a quick look inside the binary module from VU+, it seems to be similar to Technotrend TT-TVStick CT2-4400 V2.

http://linuxtv.org/w...VStick_CT2-4400

 

Supported in Linux since 3.19 kernel, so it might be quite difficult to use it on ET9x00. Can you test this usb dvb stick on a Linux PC with kernel newer than 3.19 and see if it works at all?

[Herr der Klinge]

Thank you so far

 

I had no time to test it this weekend (no Linux installed at the moment).

 

The next two days I have no chance to test that (not at home). But I'll give it a try at the end of the week. 

[Erik Slagter]

exec format error means wrong architecture, that is not going to work anyway. How did you manage, get drivers for the solo4k (= arm)?

[Herr der Klinge]

Thanks. I didn't know that before -> Now I'm a little bit wiser.

 

 

@malakudi

 

Today I found time to install Ubuntu (it's always a good idea having a linux os available).

I tried to get it run like described in your above link. Finally, no dvb device was found  

 

Any idea how I can get that work?

 

I'm a little bit confused now, while the tuner is advertised to can be used with Xtrend. Seems to be not that easy. I found no solution till now.

[malakudi]

Please run in ubuntu box

uname -a

lsusb -v

with the tuner inserted and copy here