Bonjour,
Je suis nouveau sur ce forum. Je ne parle pas anglais.
C'est la première fois que je poste.
Pouvez-vous m'aider svp ?
J'ai un écran vert qui s'affiche et mon recepteur redémarre. Ca se produit lorsque je change de chaîne mais pas à chaque fois.
Mon matériel est :
Vu+ uno sous enigma2
Une antenne de 80cm avec un double lnb (2 sorties).
Le fichier crashlog est le suivant :
"
<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>dim. mai 17 11:06:42 2015</crashdate>
<compiledate>May 16 2015</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PLi-FullHD/skin.xml</skin>
<sourcedate>2015-05-15</sourcedate>
<branch>(no branch)</branch>
<rev>d197755</rev>
<version>4</version>
</enigma2>
<image>
<stbmodel>uno</stbmodel>
<kernelversion>
<![CDATA[
Linux vuuno 3.9.6 #1 SMP Mon Feb 16 06:46:20 CET 2015 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
openpli 4 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
[eDVBVideo0] VIDEO_CONTINUE ok
< 190.843056> [eDVBAudio0] AUDIO_CONTINUE ok
< 190.853170> [eDVBPMTParser] dvb subtitle PID 0235 with wrong subtitling type (24)... force 0x10!!
< 190.910820> [eDVBCIInterfaces] gotPMT
< 190.912461> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 190.918135> [eDVBSectionReader] DMX_SET_FILTER pid=560
[Dish] tuning failed
[CCPrioMaker] search /tmp/ecm0.info
< 192.461119> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 192.461398> [eDVBSectionReader] DMX_SET_FILTER pid=18
action -> InfobarShowHideActions hide
< 197.312440> [eDVBServicePlay] timeshift
action -> InfobarChannelSelection keyChannelDown
< 200.074802> [eDVBServicePlay] timeshift
playing 1:0:16:3239:45F:35:C00000:0:0:0:
< 200.077578> [eDVBCAService] free slot 0 demux 0 for service 1:0:1:132:3E1C:13F:820000:0:0:0:
< 200.077894> [eDVBCAService] free service 1:0:1:132:3E1C:13F:820000:0:0:0:
< 200.127463> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
< 200.127684> [eDVBPCR0] DEMUX_STOP ok
< 200.128076> [eDVBPCR0] destroy
< 200.128197> [eDVBVideo0] DEMUX_STOP ok
< 200.131727> [eDVBVideo0] VIDEO_STOP ok
< 200.135694> [eDVBVideo0] destroy
< 200.135934> [eDVBAudio0] AUDIO_STOP ok
< 200.140844> [eDVBAudio0] DEMUX_STOP ok
< 200.141099> [eDVBAudio0] AUDIO_CONTINUE ok
< 200.150466> [eDVBAudio0] destroy
< 200.158254> [eDVBResourceManager] start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 200.217601> [eDVBServicePlay] timeshift
< 200.261901> [eDVBServicePlay] timeshift
not pauseable.
< 200.264778> [eDVBServicePlay] timeshift
not pauseable.
< 200.269405> [eDVBServicePlay] timeshift
not pauseable.
< 200.273876> [eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
< 200.278446> [eDVBLocalTimerHandler] remove channel 0x1aa0a20
< 200.278627> [eEPGCache] remove channel 0x1aa0a20
< 200.284464> [eDVBResourceManager] allocate channel.. 045f:0035
< 200.286604> [eDVBFrontend] (0)tune
< 200.286797> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 200.286964> [eDVBFrontend] prepare_sat System 1 Freq 12721000 Pol 0 SR 23500000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 1
< 200.287165> [eDVBFrontend] tuning to 2121 mhz
< 200.287264> [eDVBChannel] OURSTATE: tuning
< 200.287360> [eDVBServicePMTHandler] allocate Channel: res 0
< 200.287660> [eDVBCIInterfaces] addPMTHandler 1:0:16:3239:45F:35:C00000:0:0:0:
< 200.287807> [eDVBChannel] getDemux cap=00
< 200.287882> [eDVBResourceManager] allocate demux cap=00
< 200.287960> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
< 200.288165> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 200.297473> [eDVBFrontend] set static current limiting
< 200.298621> [eDVBFrontend] set sequence pos 3
< 200.298852> [eDVBFrontend] set sequence pos 7
< 200.299080> [eDVBFrontend] invalidate current switch params
< 200.375111> [eDVBFrontend] sendDiseqc: e01038f7(?)
< 200.375505> [eDVBFrontend] sleep 50ms
< 200.425644> [eDVBFrontend] set sequence pos 3
< 200.425942> [eDVBFrontend] setTone 1
< 200.445943> [eDVBFrontend] sleep 10ms
< 200.456152> [eDVBFrontend] update current switch params
< 200.456307> [eDVBFrontend] startTuneTimeout 5000
< 200.456453> [eDVBFrontend] setFrontend 1
< 200.456529> [eDVBFrontend] setting frontend 0
< 200.717785> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
< 200.717995> [eDVBFrontend] sleep 500ms
< 201.218467> [eDVBFrontend] set dynamic current limiting
< 202.079079> [DVBCAHandler] no more services
action -> InfobarChannelSelection keyChannelDown
< 205.097581> [eDVBServicePlay] timeshift
playing 1:0:19:3238:45F:35:C00000:0:0:0:
< 205.129197> [eDVBResourceManager] start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 205.175569> [eDVBServicePlay] timeshift
< 205.219824> [eDVBServicePlay] timeshift
not pauseable.
< 205.222818> [eDVBServicePlay] timeshift
not pauseable.
< 205.227560> [eDVBServicePlay] timeshift
not pauseable.
< 205.232081> [eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
< 205.236792> [eDVBResourceManager] use cached_channel
< 205.236898> [eDVBLocalTimerHandler] channel 0x1a9add0 running
< 205.237071> [eDVBChannel] getDemux cap=00
< 205.237183> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.237360> [eDVBSectionReader] DMX_SET_FILTER pid=20
< 205.241655> [eEPGCache] channel 0x1a9add0 running
< 205.241844> [eDVBChannel] getDemux cap=00
< 205.241951> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.242174> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.242312> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.242448> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.242575> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.242711> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.242848> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.242977> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.243147> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.243294> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.243425> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.243561> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.243693> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.243887> [eEPGCache] next update in 2 sec
< 205.244050> [eDVBResourceManager] stop release channel timer
< 205.244150> [eDVBServicePMTHandler] allocate Channel: res 0
< 205.244466> [eDVBCIInterfaces] addPMTHandler 1:0:19:3238:45F:35:C00000:0:0:0:
< 205.244596> [eDVBChannel] getDemux cap=00
< 205.244673> [eDVBServicePMTHandler] ok ... now we start!!
< 205.244751> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 205.244864> [eDVBServicePlay] have 1 video stream(s) (022c), and 1 audio stream(s) (006a), and the pcr pid is 022c, and the text pid is 0038
< 205.245227> [eDVBChannel] getDemux cap=01
< 205.245300> [eDVBResourceManager] allocate demux cap=01
< 205.245379> [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
< 205.255965> [eTSMPEGDecoder] decoder state: play, vpid=022c, apid=006a
< 205.256238> [eDVBPCR0] DMX_SET_PES_FILTER pid=0x022c ok
< 205.256350> [eDVBPCR0] DEMUX_START ok
< 205.260869> [eDVBAudio0] DMX_SET_PES_FILTER pid=0x006a ok
< 205.261067> [eDVBAudio0] DEMUX_START ok
< 205.261429> [eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
< 205.318146> [eDVBAudio0] AUDIO_PAUSE ok
< 205.321320> [eDVBAudio0] AUDIO_PLAY ok
< 205.331219> [eDVBVideo] Video Device: /dev/dvb/adapter0/video0
< 205.331404> [eDVBVideo] demux device: /dev/dvb/adapter0/demux0
< 205.335330> [eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
< 205.339816> [eDVBVideo0] DMX_SET_PES_FILTER pid=0x022c ok
< 205.339928> [eDVBVideo0] DEMUX_START ok
< 205.340341> [eDVBVideo0] VIDEO_FREEZE ok
< 205.343918> [eDVBVideo0] VIDEO_PLAY ok
< 205.354103> [eDVBText0] DMX_SET_PES_FILTER pid=0x0038 ok
< 205.354216> [eDVBText0] DEMUX_START ok
< 205.369149> [eDVBVideo0] VIDEO_SLOWMOTION 0 ok
< 205.373476> [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
< 205.377828> [eDVBVideo0] VIDEO_CONTINUE ok
< 205.382906> [eDVBAudio0] AUDIO_CONTINUE ok
< 205.391496> [eDVBTeletextParser] Starting!
< 205.391587> [eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
< 205.391680> [eDVBPESReader] Created. Opening demux
< 205.391761> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.392226> [eDVBTeletextParser] created teletext subtitle PES reader!
< 205.392405> [eDVBPESReader] Created. Opening demux
< 205.392490> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.392864> [eDVBTeletextParser] starting PES reader on pid=0038
< 205.392980> [eDVBPESReader] DMX_SET_PES_FILTER pid=0038
< 205.397711> [eDVBServicePlay] timeshift
not pauseable.
< 205.401168> [eDVBServicePlay] timeshift
not pauseable.
< 205.406514> [eDVBServicePlay] timeshift
< 205.468304> [eDVBCAService] new service 1:0:19:3238:45F:35:C00000:0:0:0:
< 205.468617> [eDVBCAService] add demux 0 to slot 0 service 1:0:19:3238:45F:35:C00000:0:0:0:
< 205.468753> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.468933> [eDVBSectionReader] DMX_SET_FILTER pid=0
< 205.475648> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 205.475872> [eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
< 205.486060> [eDVBChannel] getDemux cap=00
< 205.498102> [eDVBChannel] OURSTATE: failed, retune
< 205.498261> [eDVBFrontend] (0)tune
< 205.498423> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 205.498602> [eDVBFrontend] prepare_sat System 1 Freq 12721000 Pol 0 SR 23500000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 1
< 205.498714> [eDVBFrontend] tuning to 2121 mhz
< 205.498833> [eDVBChannel] OURSTATE: tuning
< 205.498926> [eDVBServicePMTHandler] tune failed.
< 205.499031> [eDVBServicePlay] DVB service failed to tune - error 1
RemovePopup, id = ZapError
AddPopup, id = ZapError
< 205.729729> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
< 205.730455> [eDVBFrontend] set static current limiting
< 205.731740> [eDVBFrontend] setTone 0
< 205.752371> [eDVBFrontend] sleep 25ms
< 205.777581> [eDVBFrontend] set sequence pos 7
< 205.777824> [eDVBFrontend] invalidate current switch params
< 205.841077> [eDVBFrontend] sendDiseqc: e00000(DiSEqC reset)
< 205.841459> [eDVBFrontend] sleep 50ms
< 205.955067> [eDVBFrontend] sendDiseqc: e00003(DiSEqC peripherial power on)
< 205.955481> [eDVBFrontend] sleep 150ms
[Dish] tuning failed
< 206.181079> [eDVBFrontend] sendDiseqc: e01038f7(?)
< 206.181513> [eDVBFrontend] sleep 50ms
< 206.231621> [eDVBFrontend] set sequence pos 3
< 206.231898> [eDVBFrontend] setTone 1
< 206.251899> [eDVBFrontend] sleep 10ms
< 206.262110> [eDVBFrontend] update current switch params
< 206.262317> [eDVBFrontend] startTuneTimeout 5000
< 206.262475> [eDVBFrontend] setFrontend 1
< 206.262550> [eDVBFrontend] setting frontend 0
< 206.262791> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
< 206.262904> [eDVBFrontend] sleep 500ms
< 206.763305> [eDVBFrontend] set dynamic current limiting
< 207.252063> [eEPGCache] start caching events(1431853594)
< 207.252271> [eDVBSectionReader] DMX_SET_FILTER pid=211
< 207.258198> [eDVBSectionReader] DMX_SET_FILTER pid=561
< 207.264355> [eDVBSectionReader] DMX_SET_FILTER pid=3842
< 207.270424> [eDVBSectionReader] DMX_SET_FILTER pid=3003
< 207.276432> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 207.293416> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 207.321622> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 207.360489> [eDVBSectionReader] DMX_SET_FILTER pid=700
< 207.366718> [eDVBSectionReader] DMX_SET_FILTER pid=700
< 207.383783> [eDVBSectionReader] DMX_SET_FILTER pid=5000
< 207.389945> [eDVBSectionReader] DMX_SET_FILTER pid=5000
< 207.407208> [eDVBSectionReader] DMX_SET_FILTER pid=57
action -> InfobarShowHideActions hide
< 207.692799> [eDVBServicePlay] timeshift
< 211.263142> [eDVBChannel] OURSTATE: failed, retune
< 211.263305> [eDVBFrontend] (0)tune
< 211.263453> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 211.263642> [eDVBFrontend] prepare_sat System 1 Freq 12721000 Pol 0 SR 23500000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 1
< 211.263756> [eDVBFrontend] tuning to 2121 mhz
< 211.263851> [eDVBChannel] OURSTATE: tuning
< 211.263946> [eDVBServicePMTHandler] tune failed.
< 211.264059> [eDVBServicePlay] DVB service failed to tune - error 1
< 211.266538> [eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
< 211.267106> [eDVBFrontend] set static current limiting
< 211.267878> [eDVBFrontend] setTone 0
< 211.288061> [eDVBFrontend] sleep 25ms
< 211.313249> [eDVBFrontend] set sequence pos 7
< 211.313476> [eDVBFrontend] invalidate current switch params
< 211.376070> [eDVBFrontend] sendDiseqc: e00000(DiSEqC reset)
< 211.376428> [eDVBFrontend] sleep 50ms
< 211.490079> [eDVBFrontend] sendDiseqc: e00003(DiSEqC peripherial power on)
< 211.490487> [eDVBFrontend] sleep 150ms
< 211.716106> [eDVBFrontend] sendDiseqc: e01038f7(?)
< 211.716582> [eDVBFrontend] sleep 50ms
< 211.766702> [eDVBFrontend] set sequence pos 3
< 211.766984> [eDVBFrontend] setTone 1
< 211.786957> [eDVBFrontend] sleep 10ms
< 211.797168> [eDVBFrontend] update current switch params
< 211.797345> [eDVBFrontend] startTuneTimeout 5000
< 211.797494> [eDVBFrontend] setFrontend 1
< 211.797570> [eDVBFrontend] setting frontend 0
< 211.797830> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
< 211.797948> [eDVBFrontend] sleep 500ms
< 211.866575> [eDVBServicePlay] timeshift
< 212.298372> [eDVBFrontend] set dynamic current limiting
< 214.447083> [eEPGCache] abort non avail nownext reading
< 214.474690> [eEPGCache] abort non avail schedule reading
< 214.491439> [eEPGCache] abort non avail schedule other reading
< 214.497171> [eEPGCache] abort non avail virgin nownext reading
< 214.513903> [eEPGCache] abort non avail virgin schedule reading
< 214.519621> [eEPGCache] abort non avail netmed schedule reading
< 214.536201> [eEPGCache] abort non avail netmed schedule other reading
< 214.541930> [eEPGCache] abort non avail FreeSat schedule_other reading
< 214.552977> [eEPGCache] abort non avail viasat reading
< 214.558504> [eEPGCache] abort non avail mhw reading
< 214.930417> [eDVBServicePlay] timeshift
playing 1:0:1:132:3E1C:13F:820000:0:0:0:
< 214.933590> [eDVBCAService] free slot 0 demux 0 for service 1:0:19:3238:45F:35:C00000:0:0:0:
< 214.933887> [eDVBCAService] free service 1:0:19:3238:45F:35:C00000:0:0:0:
< 214.977214> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
< 214.977418> [eDVBPCR0] DEMUX_STOP ok
< 214.977755> [eDVBPCR0] destroy
< 214.977874> [eDVBVideo0] DEMUX_STOP ok
< 214.978965> [eDVBVideo0] VIDEO_STOP ok
< 214.983500> [eDVBVideo0] destroy
< 214.983770> [eDVBAudio0] AUDIO_STOP ok
< 214.991867> [eDVBAudio0] DEMUX_STOP ok
< 214.992123> [eDVBAudio0] AUDIO_CONTINUE ok
< 215.002184> [eDVBAudio0] destroy
< 215.002330> [eDVBText0] DEMUX_STOP ok
< 215.015587> [eDVBText0] destroy
< 215.023867> [eDVBResourceManager] start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 215.083117> [eDVBServicePlay] timeshift
< 215.130676> [eDVBServicePlay] timeshift
not pauseable.
< 215.133440> [eDVBServicePlay] timeshift
not pauseable.
< 215.138048> [eDVBServicePlay] timeshift
not pauseable.
< 215.143119> [eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
< 215.148288> [eDVBLocalTimerHandler] remove channel 0x1a9add0
< 215.150653> [eEPGCache] remove channel 0x1a9add0
< 215.156160> [eDVBResourceManager] allocate channel.. 3e1c:013f
< 215.158368> [eDVBFrontend] (0)tune
< 215.158599> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 215.158782> [eDVBFrontend] prepare_sat System 1 Freq 11681000 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
< 215.158895> [eDVBFrontend] tuning to 1931 mhz
< 215.159046> [eDVBServicePMTHandler] allocate Channel: res 0
< 215.159349> [eDVBCIInterfaces] addPMTHandler 1:0:1:132:3E1C:13F:820000:0:0:0:
< 215.159868> [eDVBChannel] getDemux cap=00
< 215.159968> [eDVBResourceManager] allocate demux cap=00
< 215.160126> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
< 215.160230> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 215.166636> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 0(32)
< 215.166920> FATAL: /dreambox/oe.openpli-4/build/tmp/work/vuuno-oe-linux/enigma2/2.7+gitAUTOINC+d19775591b-r0/git/lib/base/ebase.cpp:155 ASSERTION notifiers.find(fd) == notifiers.end() FAILED!
]]>
</enigma2crashlog>
</crashlogs>
</openpli>"
Savez-vous me dire d'où vient le problème svp ?
Je n'y comprends rien... ;-)
D'avance merci.
