474 replies to this topic

[arn354]

thx Persian Prince - in general it still seems to work normally. Only the bootmenu is no longer shown on display like probably intended for VU+. So we have to do some boxcheck to switch between old and new code about display. I'll look into these days.

[Dimitrij]

Vu+Ultimo

 

flash openPli  run multiboot rudream

not boot

serial log

[daveraver]

Hello, I installed v.1.2a openmultiboot, but I wanted to know the path for the file .pot of the first post. I achieve to install images on multiboot but on boot when I select the image to boot, It doesn't work, and the box reboots and it stayed blocked on splash image. I would like to know if vu+ zero has some lack to get working multiboot. Thank you.

[Dimitrij]

Hello, I installed v.1.2a openmultiboot, but I wanted to know the path for the file .pot of the first post. I achieve to install images on multiboot but on boot when I select the image to boot, It doesn't work, and the box reboots and it stayed blocked on splash image. I would like to know if vu+ zero has some lack to get working multiboot. Thank you.

This was an experimental branch, do not use these plugins, they do not work.

[dadi5023]

hi !

is it working with sh4 receiver  with enigma2 in internal flash 

i tryed it but a message appear '' cannot install kernel-module-block2mtd''

Edited by dadi5023, 24 February 2016 - 13:17.

[Blacksimon]

Hi guys,

there is a chance to make it work on a zgemma H2 box with OpenPli4 on internal flash?  Error with missing boxbranding.so

 

Thank you

[WanWizard]

OpenPLi doesn't support multiboot (and/or the other way around).

 

All these tools assume the images are identical, and only the enigma part is different. Which is not the case.

[Blacksimon]

OpenPLi doesn't support multiboot (and/or the other way around).

 

All these tools assume the images are identical, and only the enigma part is different. Which is not the case.

 

But with Vu+Duo2 I have BH 2.1.7 on flash and running original OpenPli4 in multiboot ....

[balkanac]

If you want a use multiboot, the best solutions is next combinations:

In the flash: Experimental image(lastest)

Install MultiMiniBoot plugin:mmboot-dreambox_1.40_all (See tutorial: http://mirmo-linux.l...mboot-eng.html)

After, you can install any image in your Dreambox, included OpenPLi.

Working perfect!!

 

All the best....

[Pike_Bishop]

hi @Dimitrij or @arn354

 

openmultiboot works good in pli but one problem i have as following,

df -h says;

Filesystem                Size      Used Available Use% Mounted on
ubi0:rootfs              14.7G    423.7M     13.5G   3% /
devtmpfs                141.8M      4.0K    141.8M   0% /dev
/dev/sdb1                14.7G    423.7M     13.5G   3% /omb
devtmpfs                141.8M      4.0K    141.8M   0% /dev
/dev/sdb1                14.7G    423.7M     13.5G   3% /omb
ubi0:rootfs             103.8M     92.3M     11.5M  89% /usr/lib/enigma2/python/
Plugins/Extensions/OpenMultiboot

the usb stick with openmultiboot is /dev/sdb1, but it perceives ubi0:rootfs also as the same (same as /dev/sdb1 the openmultiboot stick).

this leads to a problem with backupsuite as following picture displays;

 Screenshot-ProSieben5219.jpg   94.95KB   5 downloads

it says the backup is 429 mb big during the work, but when it's done a du -h /media/usb/et9x00 says;

104.0M  /media/usb/et9x00

so it's only 104 mb big in reality.

this problem i have only with the et9000

and a backup only works in this case when @pedro_newbie remove the space check from his plugin backupsuite

 

 

with a mutant hd 2400 all works correct (here a df -h) says;

Filesystem                Size      Used Available Use% Mounted on
devtmpfs                606.9M      4.0K    606.9M   0% /dev
/dev/sda1                14.3G    751.9M     13.6G   5% /omb
ubi0:rootfs             891.6M    110.4M    781.2M  12% /usr/lib/enigma2/python/
Plugins/Extensions/OpenMultiboot

here then /dev/sda1 is the usb stick with openmultiboot..

 

 

regards

Biki3

Edited by Biki3, 23 May 2016 - 21:24.

[Pike_Bishop]

hi,

 

sorry, the problem exists also on other boxes as mutant hd 2400

it was my mistake because the mutant hd 2400 makes no problem to create a fullbackup with backupsuite

although it perceives the size of the image as 739 mb during process - this still works without problems since the mutant has a much bigger flash as the et9000.

 

 

regards

Biki3

Edited by Biki3, 24 May 2016 - 18:18.

[felymm]

Hello,

 

i need nandsim-module for vu+ solo 4k

Thx

[athoik]

vu+ solo 4k has .tar.gz image, what you need nandsim module for?

[felymm]

for openmultiboot.

thx

[Trial]

Hi,

the Solo4K does not use nand flash. It does not even use flash. It uses eMMC like the cheap netbooks.

 

ciao

[felymm]

Hi,

 

work on vu+ solo 4k openmultiboot? wehn yes, what i need  for that?

 

thx

[Dimitrij]

version 1.4 for test

 

[felymm]

@Dimitrij, Install the plugin runs through without error message! but if I install an image comes error message "Error unnpacking rootfs"?

 

thx

[Dimitrij]

@Dimitrij, Install the plugin runs through without error message! but if I install an image comes error message "Error unnpacking rootfs"?

 

thx

box name?

[Dimitrij]

felymm

replace OMBManagerInstall.py /usr/lib/enigma2/python/Plugins/Extensions/OpenMultiboot/