@SSS , ok i was just trying to solve my problem so pardon me , i mentioned b4 i installed the one u told me to install b4 :
Posted 19 May 2016 - 07:28
@SSS , ok i was just trying to solve my problem so pardon me , i mentioned b4 i installed the one u told me to install b4 :
Posted 19 May 2016 - 10:48
But check if this libs have support for HTTPS.
Check what:
ffmpeg --version
will return.
About your problem with ffmpeg 3.0.1 it is not critical. So, I will try to fix them when I will have time.
Until then, You can use version 2.8.5, so I really can't understand why so much you want to have a new version?
Regards,
SSS
Edited by samsamsam, 19 May 2016 - 10:50.
Posted 19 May 2016 - 14:01
@SSS
After installation of ffmpeg3.0_mipsel_softfpu_2.tar.gz
root@et4x00:~# ffmpeg --version ffmpeg version 3.0 Copyright (c) 2000-2016 the FFmpeg developers built with gcc 4.9.1 (GCC) configuration: --sysroot=/mnt/new2/softFPU/openpli/build/tmp/sysroots/et4x00 --cross-prefix=mipsel-oe-linux- --prefix=/mnt/new2/_BRCM_/tmp/tmp/ffmpeg/tmp/ffmpeg-3.0/usr/ --enable-cross-compile --target-os=linux --arch=mipsel --disable-mipsdsp --disable-mipsdspr2 --disable-mipsfpu --enable-pic --enable-shared --disable-static --disable-debug --disable-ffplay --disable-ffprobe --disable-ffserver --disable-outdevs --disable-doc --disable-htmlpages --disable-manpages --disable-podpages --disable-txtpages --disable-lzma --enable-openssl --enable-zlib --enable-cross-compile --enable-small --disable-sdl --disable-xlib --disable-d3d11va --disable-dxva2 --disable-vaapi --disable-vda --disable-vdpau --enable-nonfree --extra-ldflags=' -Wl,-O1 -Wl,--as-needed ' --extra-cflags=' -mel -mabi=32 -msoft-float -march=mips32 ' libavutil 55. 17.103 / 55. 17.103 libavcodec 57. 24.102 / 57. 24.102 libavformat 57. 25.100 / 57. 25.100 libavdevice 57. 0.101 / 57. 0.101 libavfilter 6. 31.100 / 6. 31.100 libswscale 4. 0.100 / 4. 0.100 libswresample 2. 0.101 / 2. 0.101 Unrecognized option '-version'. Error splitting the argument list: Option not found
Everything works like it should. Goldvod & Webcamera streams work.
Command top gives me some strange processes [nnnnnnnnnnnnnnn]. I didn´t have them in old image, dont know if them have something to do with iptv player. Should i do a complete new image flash?
Mem: 132972K used, 101848K free, 0K shrd, 3K buff, 4K cached CPU: 3% usr 17% sys 5% nic 56% idle 0% io 0% irq 16% sirq Load average: 0.45 0.58 0.46 4/77 2227 PID PPID USER STAT VSZ %VSZ %CPU COMMAND 839 835 root S 105m 46% 20% /usr/bin/enigma2 154 2 root SW 0 0% 4% [nnnnnnnnnnnnnnn] 2061 1656 root R 3220 1% 1% top 438 435 root S < 15840 7% 1% /usr/bin/doscam -b 1637 404 root S 2976 1% 1% /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key 3 2 root SW 0 0% 1% [ksoftirqd/0] 156 2 root SW 0 0% 1% [[[[[[[[[[[[[[[[] 360 1 root S 6944 3% 0% smbd -D 370 360 root S 6944 3% 0% smbd -D 358 1 root S 3988 2% 0% nmbd -D 431 1 avahi S 3568 2% 0% avahi-daemon: registering [et4x00.local] 432 431 avahi S 3568 2% 0% avahi-daemon: chroot helper 1656 1637 root S 3220 1% 0% -sh 435 1 root S 3144 1% 0% /usr/bin/doscam -b 417 1 root S 3016 1% 0% /usr/sbin/inetd 396 1 messageb S 3000 1% 0% /usr/bin/dbus-daemon --system 835 1 root S 2900 1% 0% {enigma2.sh} /bin/sh /usr/bin/enigma2.sh 380 1 root S 2900 1% 0% udhcpc -b -H et4x00 -p /var/run/udhcpc.eth0.pid -i eth0 424 1 root S 2896 1% 0% /sbin/klogd -n 422 1 root S 2896 1% 0% /sbin/syslogd -n -O /var/log/messages 404 1 root S 2720 1% 0% /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key 408 1 rpc S 2700 1% 0% /usr/sbin/rpcbind 413 1 rpcuser S 2292 1% 0% /usr/sbin/rpc.statd 1 0 root S 1952 1% 0% init [3] 84 2 root SW 0 0% 0% [kworker/u2:2] 36 2 root SW 0 0% 0% [kworker/u2:1] 59 2 root SW 0 0% 0% [usb-storage] 158 2 root SW 0 0% 0% [nnnnnnnnnnnn] 153 2 root SW 0 0% 0% [nnnnnnnn] 48 2 root SW 0 0% 0% [kworker/0:2] 144 2 root SW 0 0% 0% [jbd2/sda1-8] 46 2 root SW 0 0% 0% [ubi_bgt0d] 155 2 root SW 0 0% 0% [nnnnnnnnnnnnnnn] 2 0 root SW 0 0% 0% [kthreadd] 8 2 root SW 0 0% 0% [kdevtmpfs] 47 2 root SW 0 0% 0% [ubifs_bgt0_0] 1847 2 root SW 0 0% 0% [kworker/0:1] 5 2 root SW< 0 0% 0% [kworker/0:0H] 7 2 root SW< 0 0% 0% [khelper] 9 2 root SW< 0 0% 0% [writeback] 10 2 root SW< 0 0% 0% [crypto] 11 2 root SW< 0 0% 0% [bioset]
Thank you very much for your help.
regards
doubledip
Edited by doubledip, 19 May 2016 - 14:06.
Posted 19 May 2016 - 14:41
Hmmm strange but this is not user space process.
When name is inside [ name ] then this mean that this is kernel thread not user process.
So, propably these are kernel thread from your new DVB drivers.
Why you connect these kernel threads with installation of ffmpeg libs?
Edited by samsamsam, 19 May 2016 - 14:42.
Posted 19 May 2016 - 16:48
But check if this libs have support for HTTPS.
Check what:
ffmpeg --versionwill return.
About your problem with ffmpeg 3.0.1 it is not critical. So, I will try to fix them when I will have time.
Until then, You can use version 2.8.5, so I really can't understand why so much you want to have a new version?
Regards,
SSS
here is result , how can this result show me if ffmpeg support https or not?
what or which stream link it uses https ?
ffmpeg version 3.0.2 Copyright (c) 2000-2016 the FFmpeg developers built with gcc 5.3.0 (GCC) configuration: --disable-stripping --enable-pic --enable-shared --enable-pthreads --enable-nonfree --cross-prefix=mipsel-oe-linux- --ld='mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/oe1/nightly53/build-enviroment/builds/openatv/release/vusolose/tmp/sysroots/vusolose' --arch=mipsel --target-os=linux --enable-cross-compile --extra-cflags=' -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/oe1/nightly53/build-enviroment/builds/openatv/release/vusolose/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r0/build=/usr/src/ffmpeg -fdebug-prefix-map=/home/oe1/nightly53/build-enviroment/builds/openatv/release/vusolose/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r0/ffmpeg-3.0.2=/usr/src/ffmpeg -fdebug-prefix-map=/home/oe1/nightly53/build-enviroment/builds/openatv/release/vusolose/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/oe1/nightly53/build-enviroment/builds/openatv/release/vusolose/tmp/sysroots/vusolose= -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/oe1/nightly53/build-enviroment/builds/openatv/release/vusolose/tmp/sysroots/vusolose' --extra-ldflags='-Wl,-O1 -Wl,--as-needed' --sysroot=/home/oe1/nightly53/build-enviroment/builds/openatv/release/vusolose/tmp/sysroots/vusolose --enable-hardcoded-tables --disable-static --disable-runtime-cpudetect --disable-ffserver --disable-ffplay --disable-ffprobe --disable-iconv --disable-postproc --disable-doc --disable-altivec --disable-amd3dnow --disable-amd3dnowext --disable-mmx --disable-mmxext --disable-sse --disable-sse2 --disable-sse3 --disable-ssse3 --disable-sse4 --disable-sse42 --disable-avx --disable-xop --disable-fma3 --disable-fma4 --disable-avx2 --disable-armv5te --disable-armv6 --disable-armv6t2 --disable-vfp --disable-neon --disable-inline-asm --disable-yasm --disable-fast-unaligned --disable-muxers --disable-encoders --disable-decoders --enable-decoder=alac --enable-decoder=ape --enable-decoder=atrac1 --enable-decoder=atrac3 --enable-decoder=atrac3p --enable-decoder=cook --enable-decoder=dsd_lsbf --enable-decoder=d sd_lsbf_planar --enable-decoder=dsd_msbf --enable-decoder=dsd_msbf_planar --enable-decoder=eac3 --enable-decoder=evrc --enable-decoder=iac --enable-decoder=imc --enable-decoder=mace3 --enable-decoder=mace6 --enable-decoder=metasound --enable-decoder=mlp --enable-decoder=mp1 --enable-decoder=mp3adu --enable-decoder=mp3on4 --enable-decoder=nellymoser --enable-decoder=pcm_alaw --enable-decoder=pcm_bluray --enable-decoder=pcm_dvd --enable-decoder=pcm_f32be --enable-decoder=pcm_f32le --enable-decoder=pcm_f64be --enable-decoder=pcm_f64le --enable-decoder=pcm_lxf --enable-decoder=pcm_mulaw --enable-decoder=pcm_s16be --enable-decoder=pcm_s16be_planar --enable-decoder=pcm_s16le --enable-decoder=pcm_s16le_planar --enable-decoder=pcm_s24be --enable-decoder=pcm_s24daud --enable-decoder=pcm_s24le --enable-decoder=pcm_s24le_planar --enable-decoder=pcm_s32be --enable-decoder=pcm_s32le --enable-decoder=pcm_s32le_planar --enable-decoder=pcm_s8 --enable-decoder=pcm_s8_planar --enable-decoder=pcm_u16be --enable-decoder=pcm_u16le --enable-decoder=pcm_u24be --enable-decoder=pcm_u24le --enable-decoder=pcm_u32be --enable-decoder=pcm_u32le --enable-decoder=pcm_u8 --enable-decoder=pcm_zork --enable-decoder=ra_144 --enable-decoder=ra_288 --enable-decoder=ralf --enable-decoder=s302m --enable-decoder=shorten --enable-decoder=sipr --enable-decoder=sonic --enable-decoder=tak --enable-decoder=truehd --enable-decoder=truespeech --enable-decoder=tta --enable-decoder=wmalossless --enable-decoder=wmapro --enable-decoder=wmav1 --enable-decoder=wmav2 --enable-decoder=wmavoice --enable-decoder=aac --enable-decoder=aac_latm --enable-decoder=adpcm_ct --enable-decoder=adpcm_g722 --enable-decoder=adpcm_g726 --enable-decoder=adpcm_g726le --enable-decoder=adpcm_ima_amv --enable-decoder=adpcm_ima_oki --enable-decoder=adpcm_ima_qt --enable-decoder=adpcm_ima_rad --enable-decoder=adpcm_ima_wav --enable-decoder=adpcm_ms --enable-decoder=adpcm_sbpro_2 --enable-decoder=adpcm_sbpro_3 --enable-decoder=adpcm_sbpro_4 --enable-decoder=adpcm_swf --enable-decoder=adpcm_ yamaha --enable-decoder=flac --enable-decoder=g723_1 --enable-decoder=g729 --enable-decoder=opus --enable-decoder=qcelp --enable-decoder=qdm2 --enable-decoder=vorbis --enable-decoder=wavpack --disable-demuxer=adp --disable-demuxer=adx --disable-demuxer=afc --disable-demuxer=anm --disable-demuxer=apc --disable-demuxer=apng --disable-demuxer=ast --disable-demuxer=avs --disable-demuxer=bethsoftvid --disable-demuxer=bfi --disable-demuxer=bink --disable-demuxer=bmv --disable-demuxer=brstm --disable-demuxer=c93 --disable-demuxer=cdg --disable-demuxer=dnxhd --disable-demuxer=dsicin --disable-demuxer=dfa --disable-demuxer=dxa --disable-demuxer=ea --disable-demuxer=ea_cdata --disable-demuxer=frm --disable-demuxer=gif --disable-demuxer=gsm --disable-demuxer=gxf --disable-demuxer=hnm --disable-demuxer=ico --disable-demuxer=ilbc --disable-demuxer=iss --disable-demuxer=jv --disable-demuxer=mm --disable-demuxer=paf --disable-demuxer=pva --disable-demuxer=qcp --disable-demuxer=redspark --disable-demuxer=rl2 --disable-demuxer=roq --disable-demuxer=rsd --disable-demuxer=rso --disable-demuxer=siff --disable-demuxer=smjpeg --disable-demuxer=smush --disable-demuxer=sol --disable-demuxer=thp --disable-demuxer=tiertexseq --disable-demuxer=tmv --disable-demuxer=tty --disable-demuxer=txd --disable-demuxer=vqf --disable-demuxer=wsaud --disable-demuxer=wsvqa --disable-demuxer=xa --disable-demuxer=xbin --disable-demuxer=yop --disable-demuxer=image2 --disable-demuxer=image2pipe --disable-demuxer=ingenient --disable-demuxer=image_bmp_pipe --disable-demuxer=image_dds_pipe --disable-demuxer=image_dpx_pipe --disable-demuxer=image_exr_pipe --disable-demuxer=image_j2k_pipe --disable-demuxer=image_jpegls_pipe --disable-demuxer=image_pictor_pipe --disable-demuxer=image_png_pipe --disable-demuxer=image_qdraw_pipe --disable-demuxer=image_sgi_pipe --disable-demuxer=image_sunrast_pipe --disable-demuxer=image_tiff_pipe --disable-demuxer=image_webp_pipe --disable-demuxer=image_jpeg_pipe --disable-filters --disable-protocol=data --disable-protocol=icecast --disable-protocol=md5 --disable-protocol=pipe --disable-protocol=unix --disable-mips32r2 --disable-mipsdsp --disable-mipsdspr2 --disable-mipsdsp --disable-indevs --disable-outdevs --enable-bzlib --disable-zlib --disable-bsfs --enable-libbluray --enable-protocol=bluray --enable-librtmp --pkg-config=pkg-config --disable-debug --extra-cflags='-ffunction-sections -fdata-sections -fno-aggressive-loop-optimizations' --extra-ldflags='-Wl,--gc-sections,-lrt' --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib --datadir=/usr/share/ffmpeg --enable-avdevice --enable-avfilter --disable-bzlib --disable-libfaac --disable-gpl --disable-libgsm --disable-indev=jack --disable-libvorbis --disable-lzma --disable-libmp3lame --enable-openssl --disable-libschroedinger --disable-libspeex --disable-libtheora --disable-vaapi --disable-libvpx --disable-x11grab --disable-libx264 --disable-outdev=xv libavutil 55. 17.103 / 55. 17.103 libavcodec 57. 24.102 / 57. 24.102 libavformat 57. 25.100 / 57. 25.100 libavdevice 57. 0.101 / 57. 0.101 libavfilter 6. 31.100 / 6. 31.100 libswscale 4. 0.100 / 4. 0.100 libswresample 2. 0.101 / 2. 0.101 root@vusolose:~#
Posted 19 May 2016 - 18:38
Because i am not very familiar with linux and know almost nothing
Thank you for everything. IPTV Player works like a charme.
regards
doubledip
No problem. The change in ffmpeg compilation libs for STB without HARD float were suggested by @mx3l. He has such STB. So, big thanks to him.
Regards,
SSS
Posted 20 May 2016 - 01:43
@SSS
Established ffmpeg2.8.5_mipsel_fpu_openssl1.0.2 package
root @ azboxhd: ~ # ffmpeg --version
ffmpeg: error while loading shared libraries: libbz2.so.0: can not open shared object file: No such file or directory
Library libbz2-0 to feeds IPK absent. There libbz2-1 (libbz2.so.1).
What to do to install ffmpeg2.8.5_mipsel_fpu_openssl1.0.2?
AzBox Premium HD, HDMU_15423 (GST 1.8.0, Phyton 2.7.11)
Posted 20 May 2016 - 02:31
Dear samsamsam. Ceased to work in Russia one of the best hosts FS.TO. Starts downloading a movie and the result says Nothing found. In Ukraine, the host works fine as before. The reason in my opinion is that before from the site FS.TO Russia had automatic forwarding to another website-twin. You then solved this problem and the host earned in Russia. Now there is no redirecting and the site FS.TO works directly. Also each tab of the site FS.TO very many pages, and in the host only two. View please.
In version "127.00.05.00" NextPage on fs.to has been fixed.
According to your problem with FS.TO with Russia IP if you do not have Russia proxy server for me provide at least logs from the IPTVPlayer.
Regards,
SSS
Posted 20 May 2016 - 07:50
@ingo
Are you able to watch material using http://fs.to/ site directly from webbrowser?
Because when I use Russian proxy then I see:
Извините, материал недоступен в вашей стране
So, did you check on website if you can watch?
Posted 20 May 2016 - 11:52
@ingo
Are you able to watch material using http://fs.to/ site directly from webbrowser?
Because when I use Russian proxy then I see:
Извините, материал недоступен в вашей стране
So, did you check on website if you can watch?
Video Not Available: "Извините, материал недоступен в вашей стране"
Posted 21 May 2016 - 01:39
@SSS
Established ffmpeg2.8.5_mipsel_fpu_openssl1.0.2 package
root @ azboxhd: ~ # ffmpeg --version
ffmpeg: error while loading shared libraries: libbz2.so.0: can not open shared object file: No such file or directory
Library libbz2-0 to feeds IPK absent. There libbz2-1 (libbz2.so.1).
What to do to install ffmpeg2.8.5_mipsel_fpu_openssl1.0.2?
AzBox Premium HD, HDMU_15423 (GST 1.8.0, Phyton 2.7.11)
In my Elite, I have just installed OpenATV 5.3, then from Advanced > Packet Manager > ffmpeg 3.02 > IPTV Player installs fine, including Extplayer3.
Playback from NAS via Media is OK sound-wise but not video-wise (jerky). Streaming from the net: FilmOn is empty and I am now watching Filmovita (Triple 9) - no sound...
I have installed a larger DOM (1GB) and I overclocked the CPU, I have a SWAP, tried different options in IPTV Player and so on but... Extplayer just refuses to operate, even with buffer... And buffer is obligatory, the bigger the better - and even then, eventually it stops, sound drops out, jerky images...
We may have to try earlier images, like Alonzo's or smaller newer images, like OpenDL or maybe much earlier, smaller, simpler images like PBNIGMA...
Good luck!
P.S. IPTV Player checks for OpenSSL 1.00, during the post installation, not 1.02 - any more info on that?
0 members, 4 guests, 0 anonymous users