vu solo2
A very long restart enigma2 about two minutes
run restart enigma2 --> show message "The user interface of your receiver is restarting" --> pause 53 sec --> hide message --> load enigma2 (60sec)
What kind of a pause in 53 seconds?
Geplaatst op 28 juni 2015 - 18:22
vu solo2
A very long restart enigma2 about two minutes
run restart enigma2 --> show message "The user interface of your receiver is restarting" --> pause 53 sec --> hide message --> load enigma2 (60sec)
What kind of a pause in 53 seconds?
GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K
Geplaatst op 28 juni 2015 - 19:30
I can't see that in the log.
318 E2 start
334 E2 restart
335 E2 stopped
352 E2 start
363 E2 running (channel should be visible)
363 - 334 = 29 seconds for restart
Veranderd door betacentauri, 28 juni 2015 - 19:31
Geplaatst op 29 juni 2015 - 17:12
If in the log is enigma restart, then something happens 17 seconds between 335 when the enigma stop, and 352 when the enigma start.
What exactly happens in the log is not visible, only ORC: ERROR
Yes, the 17 seconds are strange. I don't know what happens in this time. But the 17 seconds can't be the only reason why E2 needs around 2 minutes for restart. Where are the other ~70 seconds (if restart normally takes ~30 seconds)?
Geplaatst op 29 juni 2015 - 20:53
Maybe that 2 minutes is very rounded but maybe this is for another user with another reciver, not for this.
In any case, this 17 seconds are strange, but the question is how to find out what happens?
I ask the user to show me dmesg, but that not have any information.
Veranderd door Taapat, 29 juni 2015 - 20:53
Geplaatst op 30 juni 2015 - 11:48
Are months that the problem on SOLO2 .
You have to restart because the recordings often crashes.
To see the list , it takes 40 , 50 seconds. during playback appears for the spinner 20, 30 seconds. The bar looks 20, 30 seconds after pressing a button .
After the reboot for some time it works perfectly .
It seems like it locks on a loop , as even the closing for the reboot lasts 50 seconds.
Geplaatst op 1 juli 2015 - 17:42
problem this
https://sourceforge....0c3b9ddcd7513d/
most likely [vuplus-opera-browser] support gstreamer-1.0 (1.4.5)
remove opera-browser for test
GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K
Geplaatst op 2 juli 2015 - 08:07
User inform- if revert this: http://sourceforge.n...81e5198702b383/
It is no longer a problem with the long start!
Maybe we need to renew the discussion about export HOME=/home/root?
Veranderd door Taapat, 2 juli 2015 - 08:09
Geplaatst op 2 juli 2015 - 08:09
You mean gstreamer is doing a plugin inventory on each boot?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Geplaatst op 2 juli 2015 - 09:06
You mean gstreamer is doing a plugin inventory on each boot?
The problem is found, it is http://sourceforge.n...81e5198702b383/
GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K
Geplaatst op 5 juli 2015 - 12:04
You should discuss that with athoik and find a proper solution.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
0 leden, 1 bezoekers, 0 anonieme gebruikers