Eine Filesystemüberprüfung via openpli UI hat folgendes ausgegeben:
/dev/sda1: UNEXPECTED INCONSISTENCY;
RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck wollte ich nun via SSH (putty) starten, der Befehl wird aber nicht gefunden / erkannt.
Unter Windows 8.1 mit
CrystalDiskInfo wurden keine Fehler gefunden, Status "Gut", 35°
Inzwischen habe ich unter openpli smartmontools installiert und folgenden Output erhalten:
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.17.3] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (Adv. Format)
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-xxxxxxxxxxxxxxxxxx (hab ich hier geändert)
LU WWN Device Id: 5 0014ee 6ab720101
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jul 14 22:58:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (37200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 191 191 051 Pre-fail Always - 2256
3 Spin_Up_Time 0x0027 171 167 021 Pre-fail Always - 6425
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4278
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 22782
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1011
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 244
193 Load_Cycle_Count 0x0032 183 183 000 Old_age Always - 52939
194 Temperature_Celsius 0x0022 115 088 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 001 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 133 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 133 occurred at disk power-on lifetime: 22778 hours (949 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 08 26 6b e1 Error: UNC 8 sectors at LBA = 0x016b2608 = 23799304
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 26 6b e1 08 00:12:15.538 READ DMA
ec 00 00 00 00 00 a0 08 00:12:15.534 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 00:12:15.534 SET FEATURES [Set transfer mode]
Error 132 occurred at disk power-on lifetime: 22778 hours (949 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 08 26 6b e1 Error: UNC 8 sectors at LBA = 0x016b2608 = 23799304
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 26 6b e1 08 00:12:09.932 READ DMA
c8 00 08 08 24 1d e1 08 00:12:09.916 READ DMA
c8 00 08 08 0c 4e e1 08 00:12:09.896 READ DMA
c8 00 08 08 20 1d e1 08 00:12:08.872 READ DMA
c8 00 08 08 bc 17 e1 08 00:12:07.096 READ DMA
Error 131 occurred at disk power-on lifetime: 22585 hours (941 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 08 2a 6b e1 Error: UNC 8 sectors at LBA = 0x016b2a08 = 23800328
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 2a 6b e1 08 07:03:14.723 READ DMA
ec 00 00 00 00 00 a0 08 07:03:14.719 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 07:03:14.719 SET FEATURES [Set transfer mode]
Error 130 occurred at disk power-on lifetime: 22585 hours (941 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 08 2a 6b e1 Error: UNC 8 sectors at LBA = 0x016b2a08 = 23800328
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 2a 6b e1 08 07:03:09.339 READ DMA
ec 00 00 00 00 00 a0 08 07:03:09.300 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 07:03:09.300 SET FEATURES [Set transfer mode]
Error 129 occurred at disk power-on lifetime: 22585 hours (941 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 08 2a 6b e1 Error: UNC 8 sectors at LBA = 0x016b2a08 = 23800328
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 2a 6b e1 08 07:03:06.619 READ DMA
ec 00 00 00 00 00 a0 08 07:03:06.615 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 07:03:06.615 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Edited by cyaneo, 14 July 2015 - 22:24.
