5 replies to this topic

[Gemini52]

Hi!

Help me please! How to solve the problem, please kind advice only.
I've commissioned reprogramming NBOX  5800S BSKA on E2 and now on HP w2408h monitor (HDMI 1080i 50Hz and other modes) no image before the image was. On the other receivers (without the enigma), the image is.
The monitor supports modes up to 1920x1200x60Hz  f H 74.6 kHz and decoder NC+  works on 1920x1080p.

Last morning (2015-07-15) I did update the OpenPli  from v8.3.0 to v8.6.0 but nothing helped.

I connected to NBOX via LAN and by the option Grab Screenshot (OSD) have access to the settings menu, I tested all modes, I changed also RGB color format and YUV and the monitor never once showed up image (only messages: "input signal out of range").

 

 Best Regards,
 Gemini52

 

The sum of IQ on Earth is constant, the population is growing!

 

[goldeneye]

Simple! You have probably flashed the box with an inproper version of OpenPli. Furthermore the NBOX is *not* supported by OpenPli (see the comparison chart). This means that somebody has modified an OpenPli build especially for use on the NBOX.. Since it is a non-supported box, no help to be found here...

[Trial]

Hi,

most monitors target for PCs only support 1080p60. Try this.

 

ciao

[Gemini52]

Hi,

most monitors target for PCs only support 1080p60. Try this.

 

ciao

Thank you for answer.

 

The HP w2408h monitor work with other receivers (without the enigma) with different modes (576i, 720i, 720p, 1080i, 1080p) 50Hz.

I have to find author of modified version of OpenPli, but if it is possible I will still wait for support.

 

Thx.

 

The sum of IQ on the Earth is constant, the population is growing!

[theparasol]

Instead of waiting for things that will never happen you rather should go to this site: http://nbox.xunil.pl

[Gemini52]

Instead of waiting for things that will never happen you rather should go to this site: http://nbox.xunil.pl

O.K.

Thank you answer.

The topic can be closed.

Gemini.