Hi folks,
Since gstreamer 1.x support made it to a point where it can be used as a daily driver.
I decided it would be nice to share some images so everyone can give it a spin.
All images are all 100% built from source.
I'm using the gst-1 build environment (https://github.com/O...core/tree/gst-1) with some minor differences:
- All images ship with christophecvr's multibox dvbmediasink (https://github.com/c...ox-dvbmediasink)
- glibc 2.21 has been downgraded to eglibc 2.19 (to support older kernels)
- I've added some unsupported (oem) receivers to get this to a wider range of people (using recipes from oe-a and help from gjstroom)
- A few small patches have been included against enigma2 (link below):
* dm500hdv2_dm800sev2_sh1.patch - Support for dm500hdv2, dm800sev2 and Zgemma Star
* enigma2_dmm_fixes.patch - Fixes ac3/dts bypass and restores black screen on zapping
* enigma2_oldkernel.patch - A few reverts for older kernels
- Since I'm not hosting a feed-server I've added some extra packages by default:
* oscam r10937
* OpenUitzendingGemist
* python-html, python-pycrypto, python-subprocess (for TSMedia)
These have been built today (2015-08-05).
Xtrend ET10000:
https://mega.co.nz/#...Gf1RDJGDt-geMEk
Xtrend ET9x00:
https://mega.co.nz/#...v27PxJ165kDRy_I
Xtrend ET8500:
https://mega.co.nz/#...WbZM46SJ6R0LMn8
Xtrend ET8000:
https://mega.co.nz/#...AIfyAC1z-r0WTOc
Xtrend ET7x00:
https://mega.co.nz/#...KmcvFUyKHv67jIw
Xtrend ET6x00:
https://mega.co.nz/#...4LzmSxfnXMhYJNg
Xtrend ET5x00:
https://mega.co.nz/#...V5pKy-2Se53IkKU
Xtrend ET4x00:
https://mega.co.nz/#...ueUWJMuFUtp8Pjo
Formuler F1:
https://mega.co.nz/#...D_rE-vUTRxyM46U
Formuler F3:
https://mega.co.nz/#...E2JKBQ7s-uDqFQs
VU Duo:
https://mega.co.nz/#...cBZcNNI-hYf_XLw
VU Duo 2:
https://mega.co.nz/#...JiGd0mUXf5elcV8
VU Solo:
https://mega.co.nz/#...f-Hinj52X663Nhs
VU Solo 2:
https://mega.co.nz/#...XrLnz9Vkv0UYTwY
VU Solo SE:
https://mega.co.nz/#...o2xhPEMp0QurpWw
VU Ultimo:
https://mega.co.nz/#...CQuJkUNjC3GBjT8
VU Uno:
https://mega.co.nz/#...U6dGvXhA4NYJS-c
VU Zero:
https://mega.co.nz/#...eBx6T9bEMGaHtko
Zgemma Star: (tested on H2, but should work on S, 2S and H1 as well)
https://mega.co.nz/#...Zcg99URYr15mIqA
Dreambox DM800: (tested)
https://mega.co.nz/#...uLZ6q6ngJz6Ce00
Dreambox DM800SE: (tested)
https://mega.co.nz/#...nDeyyS00Gazt0cI
Dreambox DM8000:
https://mega.co.nz/#...gFZEwEu7gUfPQvQ
Dreambox DM500HD:
https://mega.co.nz/#...z0BHGOliFZtIQz4
Dreambox DM7020HD:
https://mega.co.nz/#...ICGOKMQmwMSRm-g
Dreambox DM800SE V2:
https://mega.co.nz/#...9zCYhc4NBtae5dE
Dreambox DM500HD V2:
https://mega.co.nz/#...daMp8LKNQBxyI7k
Mut@nt HD2400:
https://mega.co.nz/#...Vy1joM9Zia-1D9k
Mut@nt HD1200:
https://mega.co.nz/#...SpNirDVMij3whX4
Mut@nt HD1100:
https://mega.co.nz/#...H0w1nEDmjq62uBw
Maxdigital XP1000:
https://mega.co.nz/#...w7rdZQgBPhN-J_A
Enigma2 patches:
https://mega.co.nz/#...vpMuq9vQRZ1_sqQ
Some notes:
- 'tested' means that the box boots succesfully, nothing more
- I couldn't build the Mut@nt HD500c target because the driver link gives me a 404, someone should update their bsp
- On DM800 only the first boot takes a while, please be patient
- If on Dreambox your remote reacts too fast please do the following:
Go to: menu - system - input devices - dreambox remote control (native)
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms
Press green button (OK)
Do the same for the dreambox advanced remote control
Please keep in mind that this isn't a support thread for unsupported (oem) receivers.
If you have a problem with an image, please PM me.
Use this thread for feedback regarding gstreamer 1.x, eg:
- IPTV / Music streaming
- Media Plugins (like TSMedia)
- Playback of local files
Huge thanks goes out to everyone involved making this happen!
Edited by WanWizard, 6 August 2015 - 13:56.
Removed clone image entries